Progress Lighting P8057-36 4-Inch Recessed Eyeball Pinhole Trim User Manual

تعارف

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P8057-36 4-Inch Recessed Eyeball Pinhole Trim. Please read this manual thoroughly before beginning installation and retain it for future reference.

The P8057-36 is an eyeball trim designed for use with Progress Lighting 4-inch recessed lighting housings. It features a 360-degree rotation and a 30-degree tilt capability, allowing for adjustable light direction.

اهم حفاظتي هدايتون

خبردار: بجليءَ جي جھٽڪي جو خطرو. انسٽاليشن يا سروسنگ کان اڳ فيوز باڪس يا سرڪٽ بريڪر تي بجلي بند ڪريو.

• سڀئي بجلي ڪنيڪشن مقامي ڪوڊ، آرڊيننس، يا نيشنل اليڪٽرڪ ڪوڊ (NEC) جي مطابق هجڻ گهرجن.
• جيڪڏهن توهان انسٽاليشن جي عمل جي باري ۾ يقين نه آهيو ته هڪ قابل اليڪٽريشن سان صلاح ڪريو.
• Ensure the trim is compatible with your existing recessed housing. This trim is designed for 4-inch recessed housings.
• وڌ ۾ وڌ وات کان وڌيڪ نه ڪريوtagايل لاءِ مخصوص ڪيو ويو آهيamp. This trim is for use with 50-watt 12V MR-16 lamps.
• Handle the trim and lamp نقصان کان بچڻ لاءِ احتياط سان.

پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• 1 x P8057-36 Recessed Eyeball Pinhole Trim (Chestnut finish)
• انسٽاليشن گائيڊ (هي دستاويز)

Note: Recessed housing and lamp (50-watt 12V MR-16) are sold separately.

سيٽ اپ ۽ تنصيب

This trim is designed for easy installation into compatible 4-inch recessed lighting housings. Ensure power is OFF before proceeding.

1. هائوسنگ تيار ڪريو: Ensure the recessed housing is properly installed and wired according to local electrical codes. The housing should be a 4-inch model compatible with 12V MR-16 lamps.
2. ايل انسٽال ڪريوamp: Carefully insert a 50-watt 12V MR-16 lamp ايل ۾amp holder within the recessed housing. Ensure it is seated securely. (Lamp شامل نه آهي)
3. Insert the Trim: Align the P8057-36 eyeball trim with the opening of the recessed housing. Gently push the trim upwards until the retention clips (if present on your housing) engage and hold the trim firmly in place.
4. ٽرم کي محفوظ ڪريو: Ensure the trim is flush with the ceiling surface. Adjust as necessary.
5. پاور بحال ڪريو: Once the trim is securely installed, restore power at the circuit breaker.

Image: The P8057-36 Recessed Eyeball Pinhole Trim in Chestnut finish. This image shows the front view of the trim, highlighting its adjustable eyeball design.

آپريشن

The P8057-36 trim allows for directional lighting adjustment.

• روشني جي هدايت کي ترتيب ڏيڻ: Gently grasp the outer ring of the eyeball and rotate it 360 degrees to direct light horizontally.
• Tilting the Eyeball: The eyeball can be tilted up to 30 degrees to aim light vertically. Carefully push or pull the eyeball to achieve the desired angle.

Note: Avoid excessive force when adjusting the eyeball to prevent damage to the mechanism.

سار سنڀال

• صفائي: Disconnect power before cleaning. Wipe the trim with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Lamp متبادل: Disconnect power before replacing the lamp. ايل کي اجازت ڏيوamp to cool completely. Carefully remove the old MR-16 lamp and insert a new 50-watt 12V MR-16 lamp. Ensure the new lamp is securely seated before restoring power.

مشڪلاتون

وضاحتون

وارنٽي ۽ سپورٽ

ٺاهيندڙ وارنٽي: This Progress Lighting product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please contact Progress Lighting customer service. Refer to the official Progress Lighting webجديد ترين رابطي جي معلومات لاءِ سائيٽ.

توھان جو دورو ڪري سگھو ٿا Progress Lighting Store on Amazon انهن جي شين جي باري ۾ وڌيڪ معلومات لاء.