Smart-AVI DVS-400S DVI Video Splitter User Manual

1. تعارف

خريد ڪرڻ لاءِ مهربانيasing the Smart-AVI DVS-400S DVI Video Splitter. This device is designed to distribute a single DVI video source to multiple DVI displays, maintaining high-quality video signals over extended distances. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit.

2. حفاظت جي ڄاڻ

Please observe the following safety precautions to prevent damage to the unit and to ensure your safety:

ھن يونٽ کي پاڻي، نمي، يا گھڻي نمي کي بي نقاب نه ڪريو.
يونٽ کي غير مستحڪم سطح تي نه رکو.
يونٽ سان فراهم ڪيل صرف پاور اڊاپٽر استعمال ڪريو.
وينٽيليشن جي افتتاح کي نه روڪيو.
سڀني خدمتن جو حوالو ڏيو قابل خدمت اهلڪارن ڏانهن.
Disconnect power before cleaning. Clean with a dry cloth only.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون موجود آهن ۽ سٺي حالت ۾ آهن:

1 x Smart-AVI DVS-400S DVI Video Splitter Unit
1 x پاور اڊاپٽر
1 x استعمال ڪندڙ دستياب (هي دستاويز)

Note: DVI cables and display devices are not included and must be purchased separately.

4. پراڊڪٽ ختمview

The DVS-400S is a compact DVI video splitter designed for reliable performance. It features one DVI input and four DVI outputs, allowing a single DVI source to be displayed on up to four DVI monitors simultaneously.

شڪل 4.1: مٿو view of the DVS-400S unit. This image shows the compact design and the Smart-AVI branding on the top surface of the device.

ريڙهه view of the Smart-AVI DVS-400S DVI Video Splitter, showing DVI input and output ports, and power input.

شڪل 4.2: ريڙهه view of the DVS-400S unit. This image highlights the DVI input port, four DVI output ports, and the power input jack, along with a power indicator LED.

System diagram showing the Smart-AVI DVS-400S DVI Video Splitter connected to a source and multiple displays.

شڪل 4.3: Typical connection diagram for a Smart-AVI DVI distribution system. This diagram illustrates how the DVS-400S (represented by a similar device in the diagram) connects a single DVI source to multiple DVI displays, often utilizing CAT5/6 cables for extended reach with compatible receivers.

5. سيٽ اپ

Follow these steps to set up your DVS-400S DVI Video Splitter:

پاور آف ڊوائيسز: Ensure all DVI source devices (e.g., computer, DVD player) and DVI display devices (e.g., monitors, projectors) are powered off before making any connections.
ڳنڍڻ جو ذريعو: Connect a DVI cable from your DVI source device to the ڊي وي آءِ port on the DVS-400S unit.
ڊسپلي ڳنڍيو: Connect DVI cables from the ڊي وي آئوٽ ports (1-4) on the DVS-400S unit to your DVI display devices.
پاور Connectنيو: Plug the supplied power adapter into the ڊي سي 5V power jack on the DVS-400S unit, then plug the adapter into a standard AC power outlet.
پاور آن: Power on the DVS-400S unit. The power indicator LED should illuminate. Then, power on your DVI display devices, followed by your DVI source device.
ڊسپلي جي تصديق ڪريو: Confirm that the video signal from your source is now displayed on all connected monitors.

Note: For optimal performance, use high-quality DVI cables. The maximum supported resolution is 1920x1200 (WUXGA).

6. آپريٽنگ هدايتون

The DVS-400S is a plug-and-play device and requires no additional software or drivers. Once connected as described in the Setup section, it will automatically split and distribute the DVI signal.

سگنل ورهائڻ: The unit will replicate the input DVI signal to all four output ports simultaneously.
قرارداد جي حمايت: Supports DVI resolutions up to 1920x1200 (WUXGA) and 1280x1024 (SXGA).
ڪيبل ڊگھائي: The effective cable length depends on the resolution and cable quality. Refer to DVI specifications for maximum recommended lengths.

7. سار سنڀال

The DVS-400S requires minimal maintenance. Follow these guidelines to ensure longevity:

صفائي: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid or aerosol cleaners.
وينٽيليشن: پڪ ڪريو ته يونٽ ۾ مناسب وينٽيليشن آهي. ڪنهن به وينٽيليشن جي سوراخن کي نه روڪيو.
اسٽوريج: If storing the unit for an extended period, disconnect all cables and store it in a cool, dry place.

8. مسئلا حل ڪرڻ

If you encounter issues with your DVS-400S, refer to the following troubleshooting guide:

مسئلو	ممڪن سبب	حل
No video output on any display.	پاور اڊاپٽر ڳنڍيل نه آهي يا خراب آهي. DVI cables loose or faulty. سورس ڊيوائس آن نه آهي يا سگنل آئوٽ پُٽ نه ٿي رهيو آهي. Display devices not powered on or set to correct input.	Check power connection to the DVS-400S and outlet. Ensure all DVI cables are securely connected. Try different cables. Verify the source device is on and sending a DVI signal. Check display power and input settings.
خراب وڊيو معيار يا ٽمٽار.	Long or low-quality DVI cables. Resolution exceeding unit capabilities.	Use shorter, higher-quality DVI cables. Reduce the resolution of the source device.
Only some displays show video.	Faulty DVI output port on the splitter. Faulty DVI cable to specific display. Faulty display.	Try swapping cables between working and non-working outputs. Test the non-working display with a different source.

9. وضاحتون

ماڊل	DVS-400S
ان پٽ پورٽس	1 x DVI-I Single Link
ٻاھرين بندرگاھن	4 x DVI-I Single Link
حمايت ٿيل قراردادون	Up to 1920x1200 (WUXGA), 1280x1024 (SXGA)
بجلي جي فراهمي	ڊي سي 5V (شامل پاور اڊاپٽر ذريعي)
طول و عرض (L x W x H)	22.35 x 16.26 x 11.18 سينٽي ميٽر (تقريبن 8.8 x 6.4 x 4.4 انچ)
وزن	680.39 گرام (تقريبن 1.5 پائونڊ)
آپريٽنگ جي درجه حرارت	0°C کان 40°C (32°F کان 104°F)
اسٽوريج جي درجه حرارت	-20 ° C کان 60 ° C (-4 ° F کان 140 ° F)

10. وارنٽي ۽ سپورٽ

Smart-AVI products are designed for reliability and performance. For warranty information and technical support, please refer to the official Smart-AVI webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

تازي معلومات ۽ سپورٽ وسيلن لاءِ، دورو ڪريو: www.smartavi.com