ACE Brand Hinged Knee Brace Instruction Manual

تعارف

The ACE Brand Hinged Knee Brace is designed to provide firm, stabilizing support and compression to weak or sore muscles and joints. This adjustable knee brace features dual-pivoting hinges and kneecap cushioning to enhance support and protection, helping you maintain stability during activity. Its wrap-around style allows for easy application and removal, and it is suitable for use on either the right or left knee. One size fits most users.

اهم خاصيتون

• Firm, Stabilizing Support: Provides robust support and compression to weak, sore muscles and joints.
• ترتيب ڏيڻ واري پٽي: Ensures customizable support and comfort, securing the brace firmly in place.
• Dual-Pivoting Hinges: Located on each side to allow natural knee movement while offering rigid stability.
• Kneecap Cushioning: Offers additional support and protection for the kneecap.
• Wrap-Around Style: آسان لاڳو ڪرڻ ۽ هٽائڻ جي سهولت فراهم ڪري ٿو.
• ورسٽائل فٽ: Designed to fit either the right or left knee, one size fits most.

ماپ ۽ فٽ

The ACE Brand Hinged Knee Brace is designed as one size fits most, accommodating a wide range of leg sizes. To ensure proper fit and optimal support, follow these guidelines:

تصوير: Sizing guide for the knee brace. Measure around the leg three inches above the kneecap. The adjustable range is 16.0-22.0 inches (40.6-55.9 cm).

تصوير: پاسي view of the ACE Hinged Knee Brace properly worn on a leg, showing the hinge mechanism.

پائڻ جون هدايتون:

1. Loosen the front straps and open the back straps and closures.
2. Position the wider edge of the brace along the thigh, ensuring the patella ring is centered over your kneecap.
3. Secure the bottom closure of the brace below the back of the knee, then secure the top closure.
4. Loop the back cinch straps through their buckles and tighten them for additional support.
5. Adjust all closures until the fit is firm, yet comfortable. Ensure the side hinges remain along the midline of either side of the leg using the strapping system.

سنڀال ۽ سار سنڀال

Proper care will extend the life of your ACE Brand Hinged Knee Brace and maintain its effectiveness.

• صرف هٿ ڌوئڻ: Hand wash the brace with mild soap in warm (not hot) water.
• چڱي طرح ڌوئڻ: Rinse well to remove all soap residue.
• هوا خشڪ: Allow the brace to air dry completely.
• مشين ڌوئڻ کان پاسو ڪريو: مشين ڌوئڻ نه ڪريو.
• No Tumble Drying: خشڪ نه ڪريو.
• No Dry Cleaning: خشڪ صاف نه ڪريو.
• No Bleach or Fabric Softeners: Do not use bleach or fabric softeners, as these can damage the material.

وضاحتون

مشڪلاتون

If you encounter any issues while using your ACE Brand Hinged Knee Brace, consider the following:

• Discomfort or Improper Fit: If the brace feels too tight, too loose, or causes discomfort, re-adjust all straps. Ensure the patella ring is correctly positioned over the kneecap and the hinges align with the sides of your knee.
• Insufficient Support: If the brace does not provide the expected level of support, ensure all straps are tightened appropriately for a firm, yet comfortable fit. Verify that the brace size is suitable for your leg measurements.
• چمڙي جي خارش: If skin irritation occurs, ensure the brace is clean and dry before application. Avoid overtightening. If irritation persists, discontinue use and consult a healthcare professional.
• Hinge Movement Issues: Check that the hinges are free from debris and are not obstructed. Ensure the brace is worn correctly to allow the hinges to articulate naturally with your knee.

If problems persist or you have concerns about your knee condition, please consult a healthcare professional.

وارنٽي ۽ سپورٽ

For warranty information, product support, or any inquiries regarding your ACE Brand Hinged Knee Brace, please contact the manufacturer, 3M. Refer to the product packaging for specific contact details or visit the official 3M webڪسٽمر سروس جي معلومات لاءِ سائيٽ.