PROEL WD12A 12-inch 350W Active Coaxial Stage Wedge Floor Monitor User Manual

1. تعارف

Thank you for choosing the PROEL WD12A Active Coaxial Stage Wedge Floor Monitor. This manual provides essential information for the safe and efficient use of your new audio equipment. The WD12A is designed to deliver clear sound intelligibility and high sound pressure levels in a lightweight, portable enclosure, making it suitable for professional musicians, rental companies, and amateur users.

Key features include a 12-inch coaxial transducer, a 350W Class D + 50W Class AB amplifier with SMPS, and two optimized EQ presets for either stage monitoring (MONITOR) or main sound system (FOH) applications. Its low-profile design and robust construction ensure reliable performance on any stage.

2. پراڊڪٽ ختمview

Familiarize yourself with the components and connections of your PROEL WD12A monitor.

شڪل 2.1: سامهون View of PROEL WD12A Monitor. This image displays the front of the PROEL WD12A active coaxial stage wedge floor monitor, highlighting its protective metal grille and the PROEL logo. The wedge shape is evident, designed for optimal sound projection when placed on a stage floor.

Figure 2.2: Rear Panel of PROEL WD12A Monitor. This image shows the recessed connection panel located at the rear of the PROEL WD12A monitor. Visible components include input/output connectors, power input, and control knobs for level adjustment and EQ preset selection. The model number WD12A is also clearly displayed.

شڪل 2.3: مٿي View of PROEL WD12A Monitor. هي تصوير مٿي کان هيٺ تائين پيش ڪري ٿي view of the PROEL WD12A monitor, emphasizing its compact and low-profile design. The robust metal grille covering the speaker components is visible, along with the overall construction of the cabinet.

3. سيٽ اپ

3.1 کولڻ

• مانيٽر کي احتياط سان ان جي پيڪنگ مان ڪيو.
• ٽرانزٽ دوران ڪنهن به نقصان جي نشانين لاءِ يونٽ جو معائنو ڪريو. جيڪڏهن نقصان ملي ٿو، ته فوري طور تي پنهنجي ڊيلر سان رابطو ڪريو.
• مستقبل جي ٽرانسپورٽ يا اسٽوريج لاءِ اصل پيڪنگنگ کي برقرار رکو.

3.2 لڳائڻ

The WD12A is designed primarily as a stage wedge monitor but can also function as a main sound system (FOH) speaker. Consider the following for optimal placement:

• Stagاي مانيٽر: Place the unit directly on the stage floor, angled towards the performer. Its low-profile design minimizes visual obstruction.
• Main Sound System (FOH): Utilize the integrated pole adapter to mount the speaker on a standard speaker pole for elevated sound projection. Ensure the pole and stand are stable and rated for the monitor's weight (approximately 11 kg / 24.25 lb).
• يونٽ جي چوڌاري مناسب وينٽيليشن کي يقيني بڻايو وڃي ته جيئن وڌيڪ گرميءَ کي روڪي سگهجي.

3.3 ڪنيڪشن

Before making any connections, ensure the monitor's power switch is in the OFF position and the main power cable is disconnected from the electrical outlet.

• آڊيو ان پٽ: Connect your audio source (e.g., mixer, instrument pre-amp) to the LINE IN connector on the rear panel using a balanced XLR cable.
• آڊيو آئوٽ پُٽ (لنڪ): If connecting multiple monitors or sending the signal to another device, use the LINE OUT connector.
• پاور ڪنيڪشن: Connect the supplied AC power cord to the POWER INPUT on the rear panel, then plug the other end into a grounded electrical outlet.

4. آپريٽنگ هدايتون

4.1 پاور آن/آف

• پاور آن: After all connections are made, set the LEVEL control to its minimum position. Connect the power cable to the outlet, then switch the POWER switch to the ON position.
• بجلي بند: Before disconnecting power, set the LEVEL control to its minimum position, then switch the POWER switch to the OFF position. Disconnect the power cable from the outlet.

4.2 Input Level Adjustment

Use the LEVEL control knob on the rear panel to adjust the overall volume of the monitor. Start with a low level and gradually increase it to the desired listening volume. Monitor the LIMITER indicator; if it illuminates frequently or stays on, reduce the input level from your source or the monitor's LEVEL control to prevent distortion and protect the speaker.

4.3 EQ Presets

The WD12A features two optimized EQ presets to adapt its sound profile to different applications:

• مانيٽر: This preset is optimized for stage monitoring, providing enhanced vocal clarity and feedback resistance.
• FOH (Front-Of-House): This preset is tailored for use as a main sound system speaker, offering a flatter frequency response suitable for general audience listening.

Select the appropriate preset using the switch on the rear panel based on your application.

5. سار سنڀال

5.1 صفائي

• صفائي ڪرڻ کان اڳ يونٽ کي بجلي کان ڌار ڪريو.
• Use a soft, dry cloth to wipe down the cabinet.
• ضدي مٽيءَ لاءِ، ٿورو ڊيamp هلڪي صابڻ وارو ڪپڙو استعمال ڪري سگهجي ٿو، ان کان پوءِ سڪل ڪپڙو.
• Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish.
• Keep liquids away from the control panel and speaker grille.

5.2 اسٽوريج

When not in use for extended periods, store the monitor in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging or a protective cover to prevent dust accumulation and physical damage.

6. مسئلا حل ڪرڻ

If you encounter issues with your PROEL WD12A monitor, refer to the following table for common problems and solutions:

If the problem persists after attempting these solutions, please contact PROEL customer support or your authorized dealer.

7. وضاحتون

Technical specifications for the PROEL WD12A Active Coaxial Stage Wedge Floor Monitor:

8. وارنٽي ۽ سپورٽ

For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official PROEL website. You may also contact your authorized PROEL dealer for assistance.