Progress Lighting P6064-31 Wall Lantern Instruction Manual

1. پراڊڪٽ ختمview

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.

شڪل 1: سامهون view of the Progress Lighting P6064-31 Wall Lantern.

2. حفاظت جي ڄاڻ

خبردار: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.

• وڌ ۾ وڌ وات کان وڌيڪ نه ڪريوtage بلب لاءِ مخصوص ڪيو ويو آهي.
• ٽٽڻ کان بچڻ لاءِ شيشي جي حصن کي احتياط سان سنڀاليو.
• Keep flammable materials away from the light fixture.

3. پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• Wall Lantern Fixture (P6064-31)
• Etched Glass Shade
• چڙهڻ واري هارڊويئر کٽ
• انسٽاليشن شيٽ

4. وضاحتون

Figure 2: Product dimensions for the P6064-31 Wall Lantern.

5. تنصيب جون هدايتون

5.1 قبل از انسٽاليشن

1. بجلي بند ڪريو سرڪٽ برڪر يا فيوز باڪس تي.
2. احتياط سان فڪسچر کوليو ۽ ڪنهن به نقصان جي چڪاس ڪريو.
3. Ensure all parts listed in Section 3 are present.

5.2 Sizing and Placement Guidance

Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.

• فيڪٽري سائيز: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
• چڙهڻ جي اوچائي: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
• Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
• Garage Doors: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.

شڪل 3: مثالample of wall lantern placement for an entryway.

شڪل 4: مثالample of wall lantern placement for a garage.

5.3 وائرنگ ۽ چڙهڻ

1. مهيا ڪيل اسڪرو استعمال ڪندي جنڪشن باڪس تي چڙهڻ واري بریکٹ کي ڳنڍيو.
2. Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
3. احتياط سان سڀني تارن کي جنڪشن باڪس ۾ ڇڪيو.
4. فڪسچر کي ماؤنٽنگ بریکٹ سان ترتيب ڏيو ۽ ان کي مهيا ڪيل اسڪرو يا نٽ سان محفوظ ڪريو.

5.4 بلب لڳائڻ

1. Insert one medium base incandescent bulb (not included) into the socket.
2. وڌ ۾ وڌ وات کان وڌيڪ نه ڪريوtag100 واٽ جو e.
3. Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.

6. آپريٽنگ هدايتون

Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.

7. سار سنڀال

To maintain the appearance and functionality of your fixture:

• صفائي: Turn off power before cleaning. Wipe the fixture with a soft, damp ڪپڙو. گھڙڻ وارا صاف ڪندڙ يا محلول استعمال نه ڪريو، ڇاڪاڻ ته اهي ختم يا شيشي کي نقصان پهچائي سگهن ٿا.
• بلب مٽائڻ: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.

8. مسئلا حل ڪرڻ

If your fixture is not operating correctly, refer to the following common issues:

9. وارنٽي ۽ سپورٽ

This Progress Lighting fixture is covered by a 1 سال جي محدود وارنٽي. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting webسائيٽ.