ايليٽيچ آر سي-5 يو ايس بي ٽمپريچر ڊيٽا لاگر هدايت نامو

1. تعارف

The Elitech RC-5 is a multi-use USB temperature data logger designed for precise temperature monitoring. It features a wide measuring range, high accuracy, and a large storage capacity of 32,000 recording points. With its built-in USB connector, data can be easily downloaded and reports generated without the need for additional cables or readers. The device is suitable for various applications requiring cold chain management, including the storage and transportation of sensitive products.

2. دٻي ۾ ڇا آهي

• 1 x Elitech RC-5 Data Logger
• 1 x CR2032 بيٽري
• 1 x استعمال ڪندڙ دستياب

3. سيٽ اپ

3.1. بيٽري لڳائڻ

1. Locate the battery compartment cover on the back of the data logger.
2. Use a coin or similar tool to gently twist and open the battery cover.
3. Insert the CR2032 battery with the positive (+) pole facing upwards, ensuring it slides under the small metal clip.
4. Replace the battery cover and twist to secure it.

3.2. Software Installation and Parameter Configuration

Before using the data logger, install the Elitechlog software on your computer. The software allows you to configure logging parameters and retrieve data.

1. Download the Elitechlog software from the official Elitech webسائيٽ.
2. اسڪرين تي ڏنل هدايتن تي عمل ڪندي سافٽ ويئر انسٽال ڪريو.
3. Connect the RC-5 data logger to your computer's USB port.
4. Open the Elitechlog software and navigate to the 'Parameter' or 'Settings' tab.
5. Configure desired settings such as log interval (e.g., 10 seconds to 24 hours), temperature unit (Celsius/Fahrenheit), alarm limits, and start mode.
6. Click 'Save Parameter' to apply the settings to the data logger.
7. Safely eject and disconnect the data logger from the computer.

3.3. Video Guide: Setup and Parameter Configuration

Video 1: This video demonstrates the battery installation process, connecting the RC-5 data logger to a computer, and configuring logging parameters using the Elitechlog software.

4. آپريٽنگ هدايتون

4.1. Starting Data Logging

After configuring parameters, you can start the data logger:

• Press and hold the left 'Play' button (triangle icon) on the data logger for more than 4 seconds.
• A triangle sign will firmly light up on the LCD screen, indicating that logging has started.

4.2. Cycling Through Display Modes

While logging, short press the 'Play' button to cycle through various display modes on the LCD screen:

• موجوده درجه حرارت
• Logging Points (number of recorded data points)
• موجوده وقت
• موجوده تاريخ
• Maximum Temperature recorded
• Minimum Temperature recorded

4.3. Stopping Data Logging

To stop data logging:

• Press and hold the right 'Pause' button (two vertical lines icon) on the data logger for more than 4 seconds.
• The logging indicator on the screen will disappear, confirming that logging has stopped.

5. ڊيٽا حاصل ڪرڻ

The Elitech RC-5 allows for easy data retrieval and report generation in multiple formats.

1. Connect the RC-5 data logger to your computer's USB port.
2. The device will automatically generate a PDF report, which can be accessed directly from the device's storage.
3. For more detailed analysis, open the Elitechlog software.
4. In the software, click on 'Export Data' and choose your preferred format (Excel, PDF, TXT, etc.) to save the data to your computer.

5.1. Video Guide: Data Export

Video 2: This video provides a quick overview of the Elitech RC-5, including connecting it to a computer and exporting data.

6. سار سنڀال

6.1. بيٽري مٽائڻ

The RC-5 uses a replaceable CR2032 battery, offering up to 6 months of battery life depending on usage and logging interval. Replace the battery when the low battery indicator appears on the LCD screen. Refer to section 3.1 for battery installation instructions.

6.2. صفائي ۽ سنڀال

To ensure optimal performance and longevity of your data logger:

• Wipe clean the device with a soft, damp ڪپڙو. گھڻائي صاف ڪندڙ استعمال نه ڪريو.
• The device is freezer safe and has an IP65 protection grade, meaning it is protected against dust and low-pressure water jets. However, avoid prolonged submersion in water.

7. مسئلا حل ڪرڻ

7.1. Software Not Recognizing Device

• Ensure the Elitechlog software is correctly installed. If issues persist, try reinstalling the software.
• Verify the data logger is securely plugged into a functional USB port.
• Try a different USB port or computer to rule out port-specific issues.

7.2. Logging Not Starting

• پڪ ڪريو ته بيٽري صحيح طرح سان نصب ٿيل آهي ۽ ڪافي چارج آهي.
• Confirm that the 'Start Mode' in the software parameters is set correctly (e.g., 'Start by button-press' or 'Timer start').
• Press and hold the 'Play' button for the required duration (more than 4 seconds) until the triangle indicator appears.

7.3. غلط درجه حرارت جي پڙهائي

• Allow the device to stabilize in the environment for at least 30 minutes after handling or connecting to a computer, as these actions can temporarily affect its internal temperature.
• Ensure the device is not exposed to direct heat sources or extreme cold during measurement, unless that is the intended monitoring environment.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For any technical assistance or inquiries, Elitech offers 24/7 US Technician Support via Email and Phone. Please refer to the contact information provided in your product packaging or on the official Elitech webتفصيل لاءِ سائيٽ.

Calibration certificates are available upon request. Please email or message Elitech for assistance.