One For All TV Bracket WM4411 Instruction Manual

تعارف

This manual provides essential information for the safe and proper installation and use of your One For All TV Bracket WM4411. This fixed wall mount is designed for televisions with screen sizes from 32 to 60 inches and is compatible with various VESA mounting patterns. Please read all instructions carefully before beginning installation.

حفاظت جي ڄاڻ

• Always read and understand all instructions before installation. If you have any doubts, consult a qualified professional.
• پڪ ڪريو ته ڀت جي جوڙجڪ محفوظ طور تي ماؤنٽ ۽ توهان جي ٽيليويزن جي گڏيل وزن کي سپورٽ ڪري سگهي ٿي.
• Do not exceed the maximum weight capacity of 1000kgs (2200 lbs) for this mount.
• Use only the provided mounting hardware or appropriate alternatives for your specific wall type.
• Keep all small parts and packaging materials out of reach of children.
• انسٽاليشن دوران مناسب حفاظتي سامان پائڻ، جهڙوڪ اکين جي حفاظت.

پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• Wall Mount Assembly (Wall Plate and TV Brackets)
• Mounting Kit (various screws, washers, spacers, concrete anchors)
• ھدايت وارو دستور

Note: Specific quantities of fasteners may vary. Refer to the detailed parts list in your physical manual for exact counts.

Setup (Installation Guide)

The One For All Toolbox App is available for easy setup and provides additional installation tools.

An image showing the black metal frame of the One For All WM4411 fixed TV wall mount, designed to securely hold televisions against a wall. It features a rectangular wall plate with multiple mounting holes and two vertical TV brackets with various VESA-compatible holes.

1. ديوار تيار ڪريو:
   • Locate suitable mounting points (wood studs for drywall, solid concrete/brick).
   • Use a stud finder to confirm stud locations if mounting to drywall.
   • Mark the desired height and center of your TV on the wall.
2. وال پليٽ لڳايو:
   • Hold the wall plate against the wall at the marked location and use a spirit level to ensure it is perfectly horizontal.
   • ڀت جي پليٽ تي سوراخن ذريعي ڊرلنگ پوائنٽس کي نشان لڳايو.
   • Drill pilot holes according to the recommended drill bit size for your wall type and chosen fasteners.
   • Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached.
3. ٽي وي سان بريڪٽس لڳايو:
   • احتياط سان پنهنجي ٽي وي جو چهرو نرم، صاف مٿاڇري تي رکو.
   • پنھنجي ٽي وي جي پٺيءَ تي ويسا چڙھيل سوراخن جي سڃاڻپ ڪريو.
   • Select the correct size screws, washers, and spacers from the mounting kit that fit your TV's VESA pattern (e.g., 100x100, 200x200, 400x400).
   • Attach the two vertical TV brackets to the back of your TV, ensuring they are oriented correctly and securely tightened.
4. ٽي وي کي ڀت جي پليٽ تي لڳايو:
   • مدد سان، احتياط سان ٽي وي کي ڳنڍيل بریکٹس سان مٿي کڻو.
   • ٽي وي بريڪٽس کي وال پليٽ جي مٿئين ڪنڊ تي لڳايو.
   • ٽي وي کي نرميءَ سان هيٺ ڪريو جيستائين بريڪٽس مڪمل طور تي ڀت جي پليٽ سان ڳنڍيل نه ٿين.
5. ٽي وي کي محفوظ ڪريو:
   • Locate the safety screws or locking mechanisms at the bottom of the TV brackets.
   • Tighten these screws or engage the locking mechanisms to secure the TV to the wall plate and prevent accidental dislodgement.

آپريٽنگ

Once installed, the One For All WM4411 is a fixed wall mount, meaning it holds your TV securely in a static position close to the wall. There are no moving parts for adjustment. Ensure the TV is properly seated and secured to the wall plate as per the installation instructions.

سار سنڀال

• صفائي: جبل کي صاف ڪرڻ لاءِ نرم، سڪل ڪپڙو استعمال ڪريو. رگڙيندڙ صاف ڪندڙ يا محلولن کان پاسو ڪريو.
• وقتي چڪاس: Periodically inspect all screws and connections to ensure they remain tight and secure. Over time, vibrations or minor shifts can loosen fasteners.
• نقصان: جيڪڏهن ماؤنٽ جو ڪو به حصو خراب يا ڳريل نظر اچي ته ان کي استعمال نه ڪريو. مدد لاءِ ڪسٽمر سپورٽ سان رابطو ڪريو.

مشڪلاتون

انسٽاليشن کان پوءِ ٽي وي ليول نه آهي:

Ensure you used a reliable spirit level during the wall plate mounting step. If the TV is slightly off, you may need to adjust the wall plate or re-drill if necessary. Do not rely solely on included spirit levels; cross-reference with a trusted tool.

ڀت تي جبل ڍلو محسوس ٿئي ٿو:

This indicates improper installation. Immediately remove the TV. Re-check your wall type and ensure you used the correct anchors and fasteners. Verify that all screws are fully tightened into solid structural elements (studs, concrete). If unsure, consult a professional installer.

Missing parts from the mounting kit:

Contact One For All customer support or the retailer where you purchased the product to request replacement parts.

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official One For All website or contact their customer service directly. You can also utilize the One For All Toolbox App for additional assistance and resources.

جو دورو ڪريو One For All Store وڌيڪ شين ۽ معلومات لاءِ.