RYOBI OCS1830 18V ONE+ Cordless Brushless 30cm Chainsaw Instruction Manual

تعارف

This manual provides essential information for the safe and effective operation, maintenance, and care of your RYOBI OCS1830 18V ONE+ Cordless Brushless 30cm Chainsaw. This tool is designed for cutting wood and is part of the versatile ONE+ System. Please read and understand all instructions before use.

Figure 1: RYOBI OCS1830 18V ONE+ Cordless Brushless 30cm Chainsaw (Battery not included)

حفاظت جي ڄاڻ

بجلي جا اوزار هلائڻ وقت هميشه حفاظت کي ترجيح ڏيو. حفاظتي هدايتن تي عمل نه ڪرڻ جي نتيجي ۾ سخت زخمي ٿي سگهي ٿو.

• Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and sturdy footwear.
• پڪ ڪريو ته ڪم واري جڳهه ماڻهن کان صاف هجي، خاص طور تي ٻارن ۽ پالتو جانورن کان.
• Inspect the chainsaw before each use for any damage or loose parts.
• Keep both hands on the chainsaw handles during operation.
• ڪڪ بيڪ کان آگاهه رهو ۽ ان کي ڪيئن روڪيو وڃي.
• ڪڏهن به زنجير کي نم حالتن ۾ يا ٻرندڙ مائع/گيس جي ويجهو نه هلايو.
• ڪنهن به سار سنڀال يا ترتيب ڏيڻ کان اڳ بيٽري کي ڌار ڪريو.

پيڪيج مواد

Your RYOBI OCS1830 Chainsaw package typically includes:

• RYOBI OCS1830 Chainsaw Unit
• 30cm Oregon Bar
• زنجير
• Bar and Chain Oil (initial supply)
• Bar Sheath
• ھدايت وارو دستور

Note: This model is sold as a bare tool. Battery and charger are sold separately and are compatible with the RYOBI 18V ONE+ System.

سيٽ اپ ڪريو

1. Attaching the Bar and Chain

1. پڪ ڪريو ته بيٽري کي چينسا مان هٽايو ويو آهي.
2. Loosen the side cover knob and remove the side cover.
3. Carefully place the chain around the drive sprocket and guide bar. Ensure the cutting edges of the chain are facing the correct direction (refer to markings on the bar).
4. Align the bar and chain assembly with the mounting studs on the chainsaw body.
5. Replace the side cover and lightly tighten the knob. Do not fully tighten yet.

2. زنجير جي ٽينشن کي ترتيب ڏيڻ

Proper chain tension is crucial for safe and efficient operation. This model features tool-less chain tensioning.

1. With the side cover lightly tightened, use the tensioning knob (usually a dial on the side) to adjust the chain tension.
2. The chain should be snug against the guide bar, but still able to be pulled freely by hand. A good rule of thumb is that you should be able to pull the chain drive links up so that 4-5 drive links are visible from the bottom of the bar.
3. Once the tension is correct, fully tighten the side cover knob securely.

3. زنجير جو تيل شامل ڪرڻ

The chainsaw features an automatic oiling system. Ensure the oil reservoir is filled before each use.

1. Locate the oil reservoir cap on the chainsaw body.
2. Unscrew the cap and fill the reservoir with recommended bar and chain oil. Do not overfill.
3. Replace the cap securely. Check the oil level periodically during operation using the visible reservoir window.

4. بيٽري داخل ڪرڻ

This chainsaw is powered by an 18V ONE+ battery (sold separately).

• Align the battery with the battery port on the chainsaw.
• بيٽري کي جاء تي سلائيڊ ڪريو جيستائين اهو محفوظ طور تي ڪلڪ نه ڪري.
• هٽائڻ لاءِ، بيٽري ڇڏڻ واري بٽڻ کي دٻايو ۽ بيٽري کي ٻاهر سلائيڊ ڪريو.

آپريٽنگ هدايتون

Chainsaw جي شروعات

1. Ensure the chain brake is disengaged (pulled back towards the front handle).
2. Grip the rear handle firmly with one hand and the front handle with the other.
3. Press the safety lock-out button (usually located near the trigger) with your thumb.
4. Squeeze the trigger to start the chainsaw. Release the safety lock-out button once the saw is running.

ڪٽڻ جي ٽيڪنالاجي

• ٻنهي هٿن سان هميشه مضبوط گرفت رکو.
• ڪاٺ سان رابطي ۾ اچڻ کان اڳ زنجير کي پوري رفتار تي پهچڻ ڏيو.
• Use the full length of the bar when possible for efficient cutting.
• Be mindful of the wood's tension to avoid pinching the bar or causing kickback.
• For larger branches, make an undercut first to prevent splintering or binding.

حفاظتي خاصيتون

• مڪينيڪل چين بريڪ: Push the front hand guard forward to engage the chain brake, stopping the chain instantly. Pull it back to disengage.
• Two-Lever System: Requires both the safety lock-out button and the trigger to be pressed for operation, preventing accidental starts.

سار سنڀال

زنجير لوڻ

Regular lubrication is essential. The automatic oiling system will dispense oil, but always monitor the reservoir level and refill as needed.

زنجير تيز ڪرڻ ۽ متبادل

• A dull chain can lead to poor performance and increased risk of kickback. Sharpen the chain regularly or replace it when necessary.
• صحيح تيز ڪرڻ جي طريقن لاءِ زنجير ٺاهيندڙ جي هدايتن جو حوالو ڏيو ۽ file ماپون.

صفائي ۽ اسٽوريج

• After each use, remove the battery and clean the chainsaw, especially the bar and chain area, to remove sawdust and debris.
• Store the chainsaw in a dry, secure location, out of reach of children. Always use the bar sheath to cover the chain during storage.

مشڪلاتون

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information, technical support, or to purchase replacement parts, please refer to the official RYOBI webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

EU اسپيئر پارٽ جي دستيابي جو عرصو: 5 سال.