Valore 7 Retrofit Easy Install Shower Panel

1. پراڊڪٽ ختمview

The Valore 7 shower panel is designed for retrofit installation into existing shower systems that include a cold and hot faucet. It connects to an existing shower head spout. The panel body is constructed from durable 304 stainless steel, offering a modern aesthetic for bathroom upgrades.

This shower panel features a 3-way shower spray mode system, allowing for versatile water delivery options. It includes a brass shower wand with a brass shower cradle for handheld use.

Image 1.1: Valore 7 Shower Panel installed in a modern bathroom setting.

2. حفاظت جي ڄاڻ

• انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته پاڻي جي فراهمي جون سڀئي لائينون بند آهن.
• انسٽاليشن دوران مناسب ذاتي حفاظتي سامان، جهڙوڪ حفاظتي چشما ۽ ​​دستانا، پائڻ.
• جيڪڏهن توهان کي انسٽاليشن جي عمل جي ڪنهن به حصي بابت پڪ ناهي، ته هڪ قابل پلمبر سان صلاح ڪريو.
• Do not use abrasive cleaners or harsh chemicals on the shower panel's surface, as this may damage the finish.

3. پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• شاور پينل يونٽ
• شاور سر
• Shower Wand (Handheld Shower)
• Shower Cradle for Handheld Shower
• لڳائڻ هارڊويئر
• Flexible Hoses for Water Connection
• انسٽاليشن دستي

4. وضاحتون

5. طول و عرض

Refer to the diagram below for detailed product dimensions.

Image 5.1: Valore 7 Shower Panel Dimensions Diagram. All measurements are approximate.

6. تنصيب جون هدايتون

The Valore 7 shower panel is designed for easy retrofit installation. It connects to your existing shower head spout and hot/cold water lines.

6.1 قبل از انسٽاليشن

1. پاڻي جي فراهمي بند ڪريو: Locate and turn off the main water supply to your bathroom or entire home.
2. Remove Existing Fixtures: Carefully remove your current shower head and any other fixtures that will be replaced by the shower panel.
3. Inspect Plumbing: Ensure your existing hot and cold water lines are accessible and in good condition. This panel is designed for systems with existing hot and cold faucets.
4. Water-Saving Regulator: If your water pressure is naturally low, consider not installing any water-saving regulator that may be included with the panel, as it can further reduce flow. If you use the hang-on to the shower pipe method, access to the regulator may be limited after installation.

6.2 پينل لڳائڻ

5. پوزيشن: Hold the shower panel against the wall in the desired position. Mark the locations for mounting brackets. Ensure the panel is level.
6. سوراخ سوراخ: نشان لڳل جڳهن تي پائلٽ سوراخ ڪريو. جيڪڏهن ضروري هجي ته ڀت تي اينڪر لڳايو.
7. محفوظ بریکٹ: مهيا ڪيل اسڪرو استعمال ڪندي ڀت تي چڙهڻ واري بریکٹ کي ڳنڍيو.
8. پينل منسلڪ: The unit may include double-sided tape for securing it to the wall. Once applied, repositioning is difficult without replacing the tape. Carefully align and press the panel onto the brackets and tape.

6.3 Connecting Water Lines

9. ڳنڍڻ جو حوض: Attach the flexible hot and cold water supply hoses from the shower panel to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
10. هٿ ۾ رکيل شاور: Connect the handheld shower hose to its designated outlet on the panel.
11. پاڻي چالو ڪريو: Slowly turn the main water supply back on and check for any leaks. Tighten connections as needed.
12. Seal Edges (Optional but Recommended): Apply a bead of clear silicone caulk along the sides of the shower panel where it meets the tile to create a seal and prevent water intrusion.

Note: This shower panel does not include a temperature/volume control valve. Your existing shower valve will control water temperature and flow.

7. آپريٽنگ هدايتون

The Valore 7 shower panel features a 3-way diverter to control water flow to different functions.

7.1 پاڻي جي وهڪري جو ڪنٽرول

Use your existing shower's hot and cold water handles to adjust the desired water temperature and overall flow rate.

7.2 Selecting Spray Modes

The panel has a control knob or lever to switch between the three spray modes:

• برسات جي برسات: Provides a wide, gentle rainfall-like spray from the overhead shower head.


Image 7.1: Valore 7 Shower Panel demonstrating the rain shower function.

• Body Jets: Delivers targeted streams of water from the integrated body massage jets.

Image 7.2: Valore 7 Shower Panel demonstrating the body jet function.
• هٿ ۾ رکيل شاور: Directs water flow to the brass shower wand for focused rinsing or cleaning.

Rotate or move the diverter control to select your desired spray function. Only one function can be active at a time.

8. سار سنڀال

8.1 صفائي

• Clean the stainless steel surface regularly with a soft cloth and mild soap or a non-abrasive stainless steel cleaner.
• Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the finish.
• For hard water spots, use a solution of white vinegar and water, then rinse thoroughly.
• Periodically clean the nozzles of the shower head and body jets to remove mineral buildup. You can often do this by gently rubbing the rubber nozzles.

8.2 عام سنڀال

• Ensure all connections remain tight to prevent leaks.
• If any part becomes loose, gently tighten it. Do not overtighten.

9. مسئلا حل ڪرڻ

10. وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valore customer service. Keep your proof of purchase for warranty claims.