Superior Electronics Simply SUPTLB001 Universal Remote Control

1. تعارف

The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.

2. مصنوعات جون خاصيتون

• يونيورسل مطابقت: Controls a wide range of devices.
• Self-Learning Function: Easily acquires commands from existing remote controls.
• Two-Device Control: Manages up to two separate electronic devices.
• وڏا بٽڻ: Designed with oversized, clearly marked buttons for enhanced usability.
• وجداني ڊيزائن: Simple layout for straightforward operation.
• Quick Programming: Learning process typically takes less than one minute per button.

3. سيٽ اپ

3.1. بيٽري لڳائڻ

The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.

1. ريموٽ ڪنٽرول جي پٺيءَ تي بيٽري جي دٻي جي احاطي کي ڳولھيو.
2. ڍڪ کي هيٺئين طرف سلائڊ ڪريو يا لچ کي دٻايو ۽ کولڻ لاءِ مٿي ڪريو.
3. ٻہ AAA بيٽريون داخل ڪريو، پڪ ڪريو ته مثبت (+) ۽ منفي (-) ٽرمينل ڪمري اندر نشانن سان صحيح طرح سان ترتيب ڏين.
4. بيٽري جي ڪمپارٽمينٽ جي ڍڪ کي تبديل ڪريو، ان کي واپس جاءِ تي سلائڊ ڪريو جيستائين اهو محفوظ طور تي ڪلڪ نه ڪري.

Image: Back of the remote control, indicating the battery compartment.

3.2. Learning Function Programming

The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.

1. Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
2. سکيا موڊ داخل ڪريو: کي دٻايو ۽ رکو پاور button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
3. Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
4. Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
5. سگنل منتقل ڪريو: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
6. Repeat for Other Buttons: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
7. سکيا واري موڊ مان نڪرڻ: Once all desired buttons are programmed, press the پاور button on the Simply remote again to exit learning mode. The indicator light will turn off.

نوٽ: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.

تصوير: سامهون view of the Simply SUPTLB001 remote control.

4. آپريٽنگ هدايتون

After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.

• ڊوائيس چونڊ: کي دٻايو A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
• پاور آن / آف: کي دٻايو پاور چونڊيل ڊوائيس کي آن يا آف ڪرڻ لاءِ بٽڻ دٻايو.
• حجم ڪنٽرول: استعمال ڪريو V+ button to increase volume and V- حجم گھٽائڻ لاء.
• Program/Channel Control: استعمال ڪريو P+ button to go to the next program/channel and P- to go to the previous program/channel.
• AV ان پٽ: کي دٻايو AV button to switch between video input sources on your television.

The functionality of each button depends on how it was programmed during the learning process.

5. سار سنڀال

• صفائي: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
• بيٽري مٽائڻ: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
• اسٽوريج: ريموٽ کي سڪي جاءِ تي رکو، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري.

6. مسئلا حل ڪرڻ

7. وضاحتون

تصوير: پاسي view of the remote control with approximate dimensions.

8. وارنٽي ۽ سپورٽ

This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 سال خريداري جي تاريخ کان.

For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics webسائيٽ. مھرباني ڪري وارنٽي جي تصديق لاءِ خريداري جو ثبوت رکو.