Elitech LogEt 8 BLE Bluetooth Wireless Data Logger User Manual

1. پراڊڪٽ ختمview

The Elitech LogEt 8 BLE is a Bluetooth wireless multi-use PDF data logger designed for monitoring temperature in various life science applications. It features a USB port for direct data download and PDF report generation, and Bluetooth connectivity for remote management via the Elitech App.

اهم خاصيتون:

• وائرليس بلوٽوت ٽيڪنالاجي: Enables one-click pairing and remote programming/management via the Elitech App within meters.
• Wide Temperature Measuring Range: -22℉ to 158℉ (-30℃ to 70℃) with an accuracy of ±0.9℉ (±0.5℃).
• موبائل ائپ مطابقت: Free Elitech App for iOS and Android devices facilitates remote logger management and cold chain monitoring.
• Multi-use Capability: Designed for repeated use over approximately 2 years under room temperature conditions.
• خودڪار ڊيٽا هم وقت سازي: Automatically uploads all recorded data to your account when connected to the Elitech APP.
• High Recording Capacity: Stores up to 16,000 recording points.

شڪل 1: سامهون view of the LogEt 8 BLE data logger with labeled components.

2. پيڪيج مواد

Verify that all items are present in the package upon unboxing:

• 1 x LogEt 8 BLE Data Logger
• 1 x استعمال ڪندڙ دستياب
• 1 x حساب ڪتاب جي سرٽيفڪيٽ

Figure 2: Contents included in the LogEt 8 BLE package.

3. ڊوائيس جا حصا

Familiarize yourself with the main components of the LogEt 8 BLE data logger:

• USB پورٽ: Located at the top, protected by a removable cap. Used for direct connection to a computer for data download and configuration.
• LCD اسڪرين: Displays current temperature, alarm status, recording status, and battery level.
• START بٽڻ: Initiates data recording.
• اسٽاپ بٽڻ: Halts data recording.
• Embedded Temperature Sensor: Internal sensor for accurate temperature measurement.

4. سيٽ اپ

4.1 شروعاتي سيٽ اپ

1. ڊوائيس کوليو: Carefully remove the LogEt 8 BLE from its packaging.
2. نقصان جي چڪاس ڪريو: Check the device for any visible damage. If damaged, contact customer support.
3. بيٽري چالو ڪرڻ: The device comes with a pre-installed lithium metal battery. No initial activation is typically required.

4.2 Software Installation (Elitech App)

To fully utilize the LogEt 8 BLE's features, download the Elitech App on your mobile device:

• ڳولھيو "Elitech" in the Apple App Store (for iOS) or Google Play Store (for Android).
• Download and install the official Elitech App.
• هڪ اڪائونٽ ٺاهيو يا لاگ ان ڪريو جيڪڏهن توهان وٽ پهريان ئي آهي.

4.3 بلوٽوت ذريعي ڳنڍڻ

Once the app is installed:

1. پڪ ڪريو ته توهان جي موبائل ڊوائيس تي بلوٽوت فعال آهي.
2. Open the Elitech App.
3. The app will scan for nearby Elitech data loggers. Select your LogEt 8 BLE from the list to pair.
4. Follow any on-screen prompts for one-click pairing.

4.4 Programming the Logger

Before starting a recording, configure the logger's parameters using the Elitech App or by connecting directly to a computer via USB:

• Via Elitech App: Within the app, navigate to the settings for your connected LogEt 8 BLE. You can set parameters such as sampling interval, alarm thresholds, start delay, and recording duration.
• Via USB (PC Software): Remove the protective cap to expose the USB port. Connect the logger to a computer. Use the Elitech data management software (downloadable from the Elitech website) to configure settings.

Figure 3: Default parameters sticker on the side of the device.

5. آپريٽنگ هدايتون

5.1 رڪارڊنگ شروع ڪرڻ

To begin data logging:

• کي دٻايو ۽ رکو START button for approximately 3 seconds until the "REC" indicator appears on the LCD screen.
• If a start delay was configured, the logger will begin recording after the specified delay.

5.2 رڪارڊنگ کي روڪڻ

To end data logging:

• کي دٻايو ۽ رکو اسٽاپ button for approximately 3 seconds until the "END" indicator appears on the LCD screen.
• Alternatively, connect the logger to the Elitech App or PC software and select the option to stop recording.

5.3 Data Download and Report Generation

After recording, data can be retrieved and analyzed:

• USB ذريعي: Remove the USB cap and plug the logger into a computer's USB port. The logger will automatically generate a PDF report and a CSV data file. هنن files can be accessed directly from the logger's virtual drive.
• Via Elitech App: Connect the logger to the Elitech App via Bluetooth. The app will automatically sync and upload all data to your account. You can then view graphs, export data, or generate reports directly from the app.

Figure 4: LogEt 8 BLE with USB port exposed and key specifications.

6. سار سنڀال

6.1 بيٽري جي ڄاڻ

The LogEt 8 BLE is powered by a non-rechargeable lithium metal battery. The battery is designed to last for approximately 2 years under normal operating conditions. The battery is contained within the equipment and is not user-serviceable. Attempting to replace the battery may damage the device and void the warranty.

6.2 صفائي

ڊوائيس صاف ڪرڻ لاء:

• ٻاھرين کي نرم، سڪل ڪپڙي سان صاف ڪريو.
• گھڙڻ وارا صاف ڪندڙ، محلول استعمال نه ڪريو، يا ڊوائيس کي پاڻي ۾ نه ٻوڙيو.

6.3 اسٽوريج

When not in use, store the data logger in a cool, dry place, away from direct sunlight and extreme temperatures.

7. مسئلا حل ڪرڻ

If you encounter issues with your LogEt 8 BLE, refer to the following common problems and solutions:

• ڊوائيس چالو نه آهي: Check battery level on the LCD. If the battery is depleted, the device may need replacement as the battery is not user-serviceable.
• بلوٽوٿ ذريعي ڳنڍڻ جي قابل ناهي: Ensure Bluetooth is enabled on your mobile device and the Elitech App is open. Make sure the logger is within range. Restart both the logger and your mobile device.
• No data recorded: Verify that recording was properly started (check for "REC" on LCD). Ensure the logger's memory is not full.
• PDF report not generated: Ensure the logger is connected to a computer's USB port correctly. Try a different USB port or computer. Ensure the USB cap is fully removed.
• غلط پڙهڻ: Ensure the logger's sensor is not obstructed and is placed in an environment suitable for its operating range.

For further assistance, contact Elitech customer support.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

9.1 وارنٽي ڄاڻ

Elitech products typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included in your package or visit the official Elitech website for specific warranty terms and conditions applicable to the LogEt 8 BLE.

9.2 ڪسٽمر سپورٽ

For technical support, troubleshooting assistance, or warranty claims, please contact Elitech customer service:

• Webسائيٽ: گهمڻ www.elitechus.com for FAQs, software downloads, and contact information.
• اي ميل/فون: Refer to the Elitech webتازي رابطي جي تفصيل لاءِ سائيٽ يا پنهنجي پراڊڪٽ پيڪنگنگ تي وڃو.