Hudson Valley Lighting MDS700-AGB Sphere No.1-1 Light Pendant User Manual

1. تعارف ۽ اوورview

Thank you for choosing the Hudson Valley Lighting MDS700-AGB Sphere No.1-1 Light Pendant. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Image 1.1: Hudson Valley Lighting MDS700-AGB Sphere No.1-1 Light Pendant, featuring an aged brass finish and an opal glass sphere.

The MDS700-AGB is a transitional one-light pendant designed for indoor use, featuring an aged brass finish and a distinctive spherical glass shade. It measures approximately 11.25 inches in width and 15.25 inches in height, providing elegant illumination for various indoor spaces.

2. حفاظت جي ڄاڻ

خبردار: بجليءَ جي جھٽڪي جو خطرو. انسٽاليشن يا سروسنگ کان اڳ فيوز باڪس يا سرڪٽ بريڪر تي بجلي بند ڪريو.

• سڀئي بجلي جا ڪنيڪشن مقامي ڪوڊ، آرڊيننس، يا نيشنل اليڪٽرڪ ڪوڊ (NEC) جي مطابق هجڻ گهرجن. جيڪڏهن توهان مناسب بجلي جي وائرنگ ڪنيڪشن کان ناواقف آهيو ته هڪ قابل اليڪٽريشن سان صلاح ڪريو.
• This fixture is intended for indoor use only. Do not expose to water or moisture.
• پڪ ڪريو ته چڙهڻ واري مٿاڇري فڪسچر جي وزن کي سهارو ڏئي سگهي ٿي.
• صرف مخصوص بلب جو قسم ۽ واٽ استعمال ڪريوtage (E26 Medium base, 100W max incandescent). Exceeding the maximum wattagاي شايد وڌيڪ گرم ٿيڻ ۽ فڪسچر کي نقصان پهچائي سگھي ٿي.
• فڪسچر کي تبديل ڪرڻ جي ڪوشش نه ڪريو. ڪا به ترميم وارنٽي کي رد ڪري سگهي ٿي ۽ حفاظتي خطرو پيدا ڪري سگهي ٿي.
• ٽٽڻ ۽ زخم کان بچڻ لاءِ شيشي جي حصن کي احتياط سان سنڀاليو.

3. پيڪيج مواد

Carefully unpack your fixture and identify all parts. Keep all packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, do not attempt to assemble or install the fixture.

• 1 x Hudson Valley Lighting MDS700-AGB Sphere No.1-1 Light Pendant
• Mounting Hardware (e.g., mounting plate, screws, wire nuts)
• ھدايت وارو دستور

نوٽ: بلب شامل نه آهي ۽ الڳ الڳ خريد ڪيو وڃي.

4. سيٽ اپ ۽ تنصيب

Assembly of this fixture is required. It is recommended that installation be performed by a qualified electrician.

4.1 قبل از انسٽاليشن

1. پاور بند ڪريو: سرڪٽ بريڪر يا فيوز باڪس ڳوليو ۽ جنڪشن باڪس جي بجلي بند ڪريو جتي فڪسچر نصب ڪيو ويندو.
2. علائقو تيار ڪريو: Clear the work area and ensure you have all necessary tools (e.g., screwdriver, wire strippers, ladder).
3. Unpack components: احتياط سان پيڪنگ مان سڀئي حصا هٽايو ۽ ڪنهن به نقصان جي چڪاس ڪريو.

4.2 فڪسچر تي چڙهڻ

1. Attach the mounting plate to the ceiling junction box using the provided screws. Ensure the plate is securely fastened.
2. Determine the desired hanging height for the pendant. Adjust the chain length by opening links as needed.
3. Thread the fixture wires through the chain and canopy.

4.3 برقي ڪنيڪشن

1. Connect the fixture's bare copper or green ground wire to the house's green or bare copper ground wire using a wire nut.
2. Connect the fixture's ribbed (or white) wire to the house's white (neutral) wire using a wire nut.
3. Connect the fixture's smooth (or black) wire to the house's black (hot) wire using a wire nut.
4. احتياط سان سڀني تارن کي جنڪشن باڪس ۾ ڇڪيو.

4.4 فائنل اسيمبلي

1. Secure the canopy to the mounting plate, ensuring it sits flush against the ceiling.
2. Install one E26 Medium base incandescent bulb (maximum 100 watts) into the socket.
3. Carefully attach the glass sphere shade to the fixture according to the specific design.
4. سرڪٽ برڪر يا فيوس باڪس تي بجلي بحال ڪريو.

5. آپريٽنگ هدايتون

The Hudson Valley Lighting MDS700-AGB Sphere No.1-1 Light Pendant is designed for simple operation. Once properly installed and wired, the fixture is typically controlled by a standard wall switch connected to the circuit.

• چالو ڪرڻ لاءِ: Flip the connected wall switch to the 'ON' position.
• بند ڪرڻ لاء: Flip the connected wall switch to the 'OFF' position.

Note: If your home is equipped with a dimmer switch, ensure it is compatible with incandescent bulbs and the total wattage does not exceed the dimmer's rating.

6. سار سنڀال

6.1 صفائي

• Always disconnect power to the fixture before cleaning.
• For general cleaning, wipe the fixture with a soft, dry cloth.
• For the glass shade, use a mild glass cleaner applied to a cloth (not directly to the fixture) to avoid damaging the finish.
• Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.

6.2 بلب جي تبديلي

• Ensure the power to the fixture is turned off and the bulb has cooled completely before attempting to replace it.
• Carefully unscrew the old bulb from the E26 Medium base socket.
• Screw in a new E26 Medium base incandescent bulb, ensuring it does not exceed 100 watts.
• فيڪٽري کي طاقت بحال ڪريو.

7. مسئلا حل ڪرڻ

جيڪڏهن توهان کي پنهنجي پينڊنٽ لائيٽ سان مسئلا درپيش اچن ٿا، ته هيٺ ڏنل عام مسئلن ۽ حلن جو حوالو ڏيو:

If you are unable to resolve an issue after following these steps, please contact customer support.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

9.1 وارنٽي ڄاڻ

This Hudson Valley Lighting fixture is covered by a 1 سال جي محدود ٺاهيندڙ جي وارنٽي خريداري جي تاريخ کان. هي وارنٽي عام استعمال هيٺ مواد ۽ ڪاريگري ۾ خرابين کي ڍڪيندي آهي. اهو غلط تنصيب، حادثي، غلط استعمال، غلط استعمال، يا غير مجاز ترميمن جي نتيجي ۾ نقصان کي ڍڪيندي ناهي.

9.2 ڪسٽمر سپورٽ

For technical assistance, warranty claims, or to report missing/damaged parts, please contact Hudson Valley Lighting customer service. Please have your model number (MDS700-AGB) and proof of purchase available when contacting support.

توهان عام طور تي ٺاهيندڙ جي سرڪاري ويب سائيٽ تي رابطي جي معلومات ڳولي سگهو ٿا webسائيٽ تي يا پنهنجي پرچون ڪندڙ ذريعي.