Progress Lighting P300222-009

Progress Lighting Tobin Collection 1-Light Etched White Glass Modern Bath Vanity Light

ماڊل: P300222-009

تعارف

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Tobin Collection 1-Light Etched White Glass Modern Bath Vanity Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Tobin vanity light features a modern design with tubular arms and an etched white glass shade, finished in Brushed Nickel. It is designed to provide functional and aesthetic lighting for your bathroom space.

Progress Lighting Tobin 1-Light Vanity Light with Etched White Glass and Brushed Nickel finish.

Figure 1: Progress Lighting Tobin 1-Light Vanity Light.

حفاظت جي ڄاڻ

  • خبردار: بجليءَ جي جھٽڪي جو خطرو. انسٽاليشن يا سروسنگ کان اڳ فيوز باڪس يا سرڪٽ بريڪر تي بجلي بند ڪريو.
  • سڀئي بجلي جا ڪنيڪشن مقامي ڪوڊ، آرڊيننس، يا نيشنل اليڪٽرڪ ڪوڊ (NEC) جي مطابق هجڻ گهرجن. جيڪڏهن توهان مناسب بجلي جي وائرنگ ڪنيڪشن کان ناواقف آهيو ته هڪ قابل اليڪٽريشن سان رابطو ڪريو.
  • هي فڪسچر صرف اندروني استعمال لاءِ آهي.
  • صرف بلب جو قسم ۽ واٽ استعمال ڪريوtage specified for this fixture. Exceeding the recommended wattage may cause overheating and damage.
  • ٽٽڻ کان بچڻ لاءِ شيشي جي حصن کي احتياط سان سنڀاليو.
  • Ensure the fixture is securely mounted to a structural element of the building.
  • هي پراڊڪٽ يو ايل لسٽ ٿيل آهي، انهي کي يقيني بڻائي ٿو ته اهو مخصوص حفاظتي معيارن تي پورو لهي ٿو.

پيڪيج مواد

Carefully unpack your new fixture and lay out all parts on a clear area. Ensure all components listed below are present before discarding packaging materials.

  • Fixture Body (with tubular arm and backplate)
  • سفيد شيشي جو ڇانو
  • Mounting Hardware (crossbar, mounting screws, wire nuts)
  • انسٽاليشن شيٽ

وضاحتون

برانڊپيش رفت روشني
ماڊل نالوTobin
حصو نمبرP300222-009
رنگBrushed Nickel (Fixture), Etched White (Shade)
موادمصر جو اسٽيل (فڪسچر)، شيشو (ڇانو)
اندازجديد
لائيٽ فيڪٽري فارموينٽي
ڪمري جو قسمباٿ روم
اندروني / ٻاهران استعمالاندريون
طاقت جو ذريعوAC
انسٽاليشن جو قسممٿاڇري تي لڳل
خاص خصوصيتدائم
روشني جو ذريعو قسمتاپديپت (ايل اي ڊي سان مطابقت رکندڙ)
روشني ذريعن جو تعداد1
جلدtage120 وولٽ
واتtage100 واٽ (و max)
بلب جو بنيادE26 وچولي
روشني250 lumens (typical for included bulb, may vary with bulb choice)
شيءِ جو وزن3.02 پائونڊ
اسيمبلي گهربلها
وضاحت ميٽرUL لسٽ
Technical drawing with dimensions for the Tobin 1-Light Vanity Light.

شڪل 2: پيداوار جا طول و عرض.

سيٽ اپ ۽ تنصيب

توھان کان پھريان شروع ڪريو: Ensure power is turned off at the circuit breaker. Read all instructions thoroughly.

  1. چڙهڻ واري مٿاڇري کي تيار ڪريو: Ensure the electrical box is securely installed and capable of supporting the fixture's weight.
  2. ماؤنٽنگ پليٽ ڳنڍيو: Secure the mounting crossbar to the electrical box using the provided screws.
  3. وائر ڪنيڪشن: Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
  4. فڪسچر لڳايو: Carefully align the fixture's backplate with the mounting screws on the crossbar. Secure the fixture in place with the decorative nuts or screws.
  5. شيشي جي ڇانو انسٽال ڪريو: Place the etched white glass shade over the socket and secure it according to the specific design (e.g., with a threaded ring or set screws).
  6. بلب انسٽال ڪريو: Insert one E26 medium base bulb (max 100W incandescent or equivalent LED) into the socket.

This fixture can be mounted with the light facing upwards or downwards, depending on your preference and desired lighting effect.

Diagram showing the Tobin vanity light mounted both facing up and facing down.

Figure 3: Mounting Options (Up or Down).

انسٽاليشن وڊيو گائيڊ

Video 1: Bath and Vanity Sizing and Placement Guidelines. This video provides general guidance on sizing and placement for bathroom vanity lights, which can be helpful during installation.

آپريٽنگ هدايتون

Once installed, restore power at the circuit breaker. The fixture is operated via a standard wall switch (not included). If connected to a compatible dimmer switch, the light output can be adjusted. Ensure the bulb used is dimmable if you intend to use a dimmer switch.

سار سنڀال

  • صفائي: Always turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish.
  • شيشي جي ڇانو: The etched white glass shade can be removed for cleaning. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
  • بلب مٽائڻ: Ensure power is off and the bulb has cooled before attempting to replace it. Use an E26 medium base bulb, not exceeding 100 watts.

مشڪلاتون

مسئلوممڪن سببحل
روشني doesرندي ناهي.
  • سرڪٽ بريڪر تي بجلي بند آهي.
  • لوز تار ڪنيڪشن.
  • بلب خراب آهي يا صحيح طرح سان نصب نه ڪيو ويو آهي.
  • سرڪٽ بريڪر چيڪ ڪريو ۽ پڪ ڪريو ته پاور آن آهي.
  • پڪ ڪريو ته سڀئي تار ڪنيڪشن محفوظ آهن (پاور آف سان).
  • بلب کي تبديل ڪريو يا پڪ ڪريو ته اهو صحيح طرح سان لڳل آهي.
هلڪو چمڪدار.
  • ٿلهو بلب.
  • غير مطابقت رکندڙ ڊمر سوئچ يا بلب.
  • بلب کي مضبوط ڪريو.
  • Ensure dimmer switch and bulb are compatible. Consult a qualified electrician if needed.
شيشي جو ڇانو ڍلو آهي.
  • Securing ring/screws are not tightened.
  • Gently tighten the securing ring or set screws. Do not overtighten.

وارنٽي ۽ سپورٽ

This Progress Lighting product is covered by a 1 سال جي محدود وارنٽي. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting webسائيٽ.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.