Wellue Bluetooth Blood Pressure Monitor BP2A User Manual

1. تعارف

This manual provides essential instructions for the safe and effective use of your Wellue Bluetooth Blood Pressure Monitor BP2A. This device is designed for home use to measure systolic blood pressure (SYS), diastolic blood pressure (DIA), mean arterial pressure (MAP), pulse rate, and pulse pressure. It also features an ECG function for additional heart health monitoring. Please read this manual thoroughly before first use and retain it for future reference.

2. اهم حفاظتي ڄاڻ

• Consult your physician before using this device for any medical condition. Self-diagnosis and treatment based on measurements can be dangerous.
• This device is intended for adult home use only. It is not intended for use on infants, children, or pregnant women.
• Do not use this device in conjunction with high-frequency surgical equipment.
• ڊوائيس ٻارن ۽ پالتو جانورن جي پهچ کان پري رکو.
• ڊوائيس کي ڌار نه ڪريو يا مرمت ڪرڻ جي ڪوشش نه ڪريو. سڀني سروسنگ کي قابل اهلڪارن جي حوالي ڪريو.
• Avoid strong electromagnetic fields during use, as they may interfere with the device's operation.
• غذائي سپليمنٽس جي حوالي سان بيانن جو FDA پاران جائزو نه ورتو ويو آهي ۽ ڪنهن به بيماري يا صحت جي حالت جي تشخيص، علاج، علاج، يا روڪڻ جو ارادو نه آهي.

3. پيڪيج مواد

پيڪيج کولڻ وقت پڪ ڪريو ته سڀئي شيون موجود آهن:

• Wellue Bluetooth Blood Pressure Monitor BP2A (integrated with cuff)
• USB چارجنگ ڪيبل
• استعمال ڪندڙ دستي

4. ڊوائيس اوورview

The Wellue BP2A monitor features a compact, one-piece design for ease of use and portability. It includes an integrated arm cuff, a digital display, and control buttons.

Figure 4.1: Wellue BP2A Blood Pressure Monitor and ViHealth App Interface.

Figure 4.2: Key features of the Wellue BP2A monitor, including Bluetooth connectivity, FDA clearance, rechargeable battery, and built-in memory for 50 readings.

5. سيٽ اپ

5.1 ڊوائيس چارج ڪرڻ

Before initial use, fully charge the device using the provided USB cable. Connect the cable to the monitor's charging port and a standard USB power adapter (not included). A full charge can provide power for up to 300 measurements.

5.2 Installing the ViHealth App

The Wellue BP2A works with the free ViHealth app, available for iOS and Android devices. ڳولھيو "ViHealth" in your device's app store and install it.

Figure 5.1: The ViHealth app for Android and iOS, used to track blood pressure and heart measurements.

5.3 بلوٽوٽ جوڙي

Ensure Bluetooth is enabled on your smartphone. Open the ViHealth app. Turn on the Wellue BP2A monitor. The device should automatically connect to the app. Follow any on-screen prompts within the app to complete the pairing process.

6. آپريٽنگ هدايتون

6.1 ڪف جي مناسب جاءِ

Accurate measurement depends on correct cuff placement. Ensure the cuff is placed directly on your bare upper arm, 1-2 cm above the elbow joint. The air tube (if applicable, though this is a one-piece design, the sensor area should be aligned) should be positioned over the brachial artery. The cuff should fit snugly but not too tightly. Refer to the diagram below for guidance.

Figure 6.1: Correct cuff placement for accurate blood pressure measurement.

6.2 بلڊ پريشر جي ماپ وٺڻ

1. Sit comfortably with your back supported and feet flat on the floor. Rest your arm on a table so the cuff is at heart level.
2. Ensure the device is powered on and, if desired, connected to the ViHealth app.
3. کي دٻايو شروع / بند ڪريو button on the device. The cuff will begin to inflate.
4. ماپ دوران خاموش ۽ خاموش رهو.
5. Once complete, your blood pressure readings (SYS, DIA, MAP, Pulse Rate, Pulse Pressure) will be displayed on the device screen and automatically uploaded to the ViHealth app if connected.

Figure 6.2: User taking a blood pressure measurement with the Wellue BP2A monitor.

6.3 اي سي جي ماپ وٺڻ

The device also supports ECG measurements. To take an ECG:

1. Ensure the device is powered on and connected to the ViHealth app.
2. Hold the device with both hands, placing your thumbs on the designated electrodes (usually the metal strips on the sides or top of the device).
3. Remain still and relaxed for the duration of the measurement (typically 30 seconds).
4. The ECG waveform and heart rate will be displayed on the device and recorded in the app.

Figure 6.3: Real-time recording of ECG values using the Wellue BP2A monitor.

6.4 Using the ViHealth App for Data Management

The ViHealth app allows you to:

• View real-time readings during measurement.
• Access historical data and trends for multiple users.
• Generate and share PDF/CSV reports with healthcare providers.
• Track both blood pressure and ECG data in one place.

Figure 6.4: Sharing EKG reports generated by the ViHealth app.

7. سار سنڀال

7.1 صفائي

Wipe the device and cuff with a soft, dry cloth. If necessary, use a cloth lightly dampened with water or a mild disinfectant. Do not immerse the device in water or use abrasive cleaners.

7.2 اسٽوريج

ڊوائيس کي ٿڌي، سڪل جاءِ تي، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري رکو. استعمال ۾ نه هجڻ تي ان کي ان جي اصل پيڪنگنگ يا حفاظتي ڪيس ۾ رکو.

7.3 بيٽري جي سنڀال

To prolong battery life, charge the device regularly, even if not used frequently. Avoid fully discharging the battery for extended periods.

8. مسئلا حل ڪرڻ

9. وضاحتون

• ماڊل نالو: Armfit Plus
• شئي ماڊل نمبر: بي پي 2 اي
• برانڊ: ويل
• ڪف سائز: 8.7-16.5 انچ (22-42 سينٽي)
• طاقت جو ذريعو: بيٽري سان هلندڙ (1 ليٿيم آئن بيٽري، شامل آهي)
• ڊسپلي جو قسم: ڊجيٽل
• پيداوار جي ماپ: 5.9"ليٽر x 1.9"ڊبليو x 1.18"ٿ
• وزن: تقريبن 15.84 آونس
• رابطي: بلوٽوٿ
• ياداشت: Built-in memory for 50 sets of readings

10. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official Wellue webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.