PNI SP2000W Voltage Inverter User Manual

1. حفاظت جي ڄاڻ

Read all safety instructions carefully before installing and operating the PNI SP2000W Voltage Inverter. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• برقي حفاظت: هي ڊوائيس وڏي وولٽ سان ڪم ڪري ٿوtage. Do not open the inverter casing. All servicing must be performed by qualified personnel.
• وينٽيليشن: Ensure adequate ventilation around the inverter. Do not block the cooling fans or place the inverter in an enclosed space. Overheating can cause damage or fire.
• ماحول: Do not expose the inverter to water, rain, snow, spray, or dust. Operate in a dry, cool, and well-ventilated area.
• بيٽري ڪنيڪشن: Connect the inverter directly to a 12V car battery. Do not connect to other voltage sources or attempt to use with solar panels, as special inverters are required for solar systems.
• لوڊ مطابقت: This inverter is designed for resistive loads such as TVs, lighting lamps, radios, fans, and mini-refrigerators. Avoid connecting inductive loads with high starting currents unless within the inverter's surge capacity.
• اوور لوڊ تحفظ: The inverter includes overload protection. Do not exceed the continuous output power of 2000W.

2. پراڊڪٽ ختمview

The PNI SP2000W is a pure sinusoid voltage inverter designed to convert 12V DC power from a car battery into 230V AC power, suitable for powering various electrical appliances. It features a continuous output of 2000W and active cooling for efficient operation.

2.1. اهم خاصيتون

• ٻاھر نڪرڻ جي طاقت: 2000W continuous, 4000W peak.
• انٽ واليمtage: 12 وي ڊي سي.
• اوٽ وولٽtage: 220V / 230V AC.
• ٻا Wave واري موج شڪل: Pure Sinusoid.
• تعدد: 50 هز.
• ٿڌي ڪرڻ: Active cooling with two built-in fans and aluminum housing.
• تحفظ: Overload, thermal, short circuit.

2.2. پيڪيج مواد

• PNI SP2000W Voltagاي انورٽر
• Power connection cables (red for positive, black for negative)
• Wrench for terminal connections
• استعمال ڪندڙ دستي

شڪل 1: سامهون view of the PNI SP2000W Voltage Inverter, showing the blue casing and the PNI logo.

شڪل 2: مٿي view of the PNI SP2000W Voltage Inverter, displaying the product label with model information and specifications.

Figure 3: The PNI SP2000W Voltage Inverter shown with its included accessories: power connection cables (red and black) and a wrench for securing terminals.

3. سيٽ اپ

توهان جي انورٽر جي محفوظ ۽ ڪارآمد آپريشن لاءِ صحيح سيٽ اپ تمام ضروري آهي.

3.1. رکڻ

• Place the inverter on a flat, stable surface.
• Ensure there is at least 15 cm (6 inches) of clear space around the inverter for proper ventilation.
• Avoid direct sunlight, heat sources, and areas with high humidity or dust.

3.2. Connecting to a 12V Battery

The inverter must be connected directly to a 12V DC battery. Use the provided cables for connection.

1. پڪ ڪريو ته انورٽر جو پاور سوئچ "آف" پوزيشن ۾ آهي.
2. Connect the red cable to the positive (+) terminal of the inverter and then to the positive (+) terminal of the 12V battery.
3. Connect the black cable to the negative (-) terminal of the inverter and then to the negative (-) terminal of the 12V battery.
4. Tighten all connections securely using the provided wrench to prevent loose connections, which can cause overheating and damage.
5. Verify that all connections are correct and secure before proceeding.

Figure 4: Input side of the inverter, showing the 12V DC positive (+) and negative (-) terminals for battery connection, along with the cooling fans.

Figure 5: Output side of the inverter, featuring two 230V AC sockets, the main power switch, and indicator lights for power and fault status.

4. آپريٽنگ هدايتون

Follow these steps to operate your PNI SP2000W Voltage Inverter safely.

1. پاور آن: After ensuring all connections are secure and correct, switch the inverter's power button to the "ON" position. The green "POWER" indicator light should illuminate.
2. ڳنڍڻ جو سامان: Plug your 230V AC appliances into the inverter's output sockets. Ensure the total wattage of all connected appliances does not exceed 2000W.
3. مانيٽر: Observe the inverter's indicator lights. If the red "FAULT" light illuminates, refer to the Troubleshooting section.
4. بجلي بند: When you are finished using the inverter, first turn off and unplug all connected appliances. Then, switch the inverter's power button to the "OFF" position.

5. سار سنڀال

Regular maintenance helps ensure the longevity and reliable performance of your inverter.

• صفائي: Periodically clean the exterior of the inverter with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure the cooling vents are free from dust and debris.
• وينٽيليشن: Regularly check that the cooling fans are not obstructed and are operating correctly. Good airflow is essential to prevent overheating.
• ڪيبل ڪنيڪشن: Periodically inspect the battery connection cables for any signs of wear, damage, or corrosion. Ensure connections remain tight.
• اسٽوريج: If storing the inverter for an extended period, disconnect it from the battery and store it in a cool, dry place away from direct sunlight.

6. مسئلا حل ڪرڻ

If you encounter issues with your PNI SP2000W Inverter, refer to the following common problems and solutions.

جيڪڏهن انهن حلن جي ڪوشش ڪرڻ کان پوءِ به مسئلو برقرار رهي ته ڪسٽمر سپورٽ سان رابطو ڪريو.

7. وضاحتون

8. وارنٽي ۽ سپورٽ

PNI products are manufactured to high-quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the official PNI webسائيٽ.