ISUDAR SU6901 Car Subwoofer (Wired) Instruction Manual

1. تعارف

Welcome to the ISUDAR SU6901 Car Subwoofer instruction manual. This document provides essential information for the proper installation, operation, and maintenance of your new active car subwoofer. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. پراڊڪٽ ختمview

The ISUDAR SU6901 is an active car subwoofer designed to enhance your vehicle's audio system with powerful bass. It features an integrated amplifier and a compact design for flexible installation.

مکيه اجزاء

شڪل 2.1: مجموعي طور view of the ISUDAR SU6901 active car subwoofer.

Figure 2.2: The control panel on the side of the subwoofer provides access to power connections, input options, and audio adjustments.

3. اهم خاصيتون

• انٽيگريڊ پاور Ampزنده: Delivers 150 watts of bass output.
• پائيدار المونيم تعمير: Full die-cast aluminum molds ensure rapid heat dissipation and minimize noise-causing vibrations.
• اعلي سطحي ان پٽ: Allows connection to both aftermarket and original equipment stereo systems, making it a perfect addition to your car's factory audio.
• Ultra-Slim, Space-Saving Design: Compact dimensions enable installation under most car seats, preserving passenger legroom.
• متغير گھٽ-پاس فلٽر: Provides control over level, frequency, and phase settings for customized bass response.
• ريموٽ باس ڪنٽرول: Included remote allows easy adjustment of bass levels from the driver's seat.

4. پيڪيج مواد

مھرباني ڪري تصديق ڪريو ته سڀ شيون پيڪيج ۾ موجود آھن:

Figure 4.1: Components included with your ISUDAR SU6901 subwoofer.

• ISUDAR SU6901 Active Car Subwoofer
• Power Wire (480cm)
• Audio Cable (500cm)
• فيوز
• گرائونڊ تار
• Control Wire (500cm)
• ريموٽ باس ڪنٽرول
• Various Connectors and Mounting Hardware

5. ٽيڪنيڪل وضاحتون

6. انسٽاليشن گائيڊ

حفاظتي احتياط

• Disconnect the vehicle's negative battery terminal before starting installation.
• پڪ ڪريو ته سڀئي وائرنگ صحيح طرح سان موصل ٿيل آهن ته جيئن شارٽ سرڪٽ کي روڪي سگهجي.
• Mount the subwoofer securely to prevent movement during driving.
• جيڪڏهن توهان کي انسٽاليشن جي ڪنهن به مرحلي بابت پڪ ناهي ته ڪنهن ماهر سان صلاح ڪريو.

تجويز ڪيل جڳهه

The compact design of the ISUDAR SU6901 allows for flexible placement. The most common and recommended location is under a car seat to save space and provide optimal bass distribution. Ensure there is adequate ventilation around the unit.

وائرنگ جون هدايتون

The subwoofer requires power, ground, and a remote turn-on signal, in addition to audio input.

پاور ڪنيڪشن

Figure 6.1: Power and ground wiring connections.

• Connect the red power wire (typically 480cm) to the positive (+) terminal of your car battery. Install the included fuse holder as close to the battery as possible.
• Connect the black ground wire to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection.
• Connect the blue remote turn-on wire to the remote output of your car's head unit. This wire tells the subwoofer to turn on and off with your stereo.

آڊيو ان پٽ ڪنيڪشن

The ISUDAR SU6901 supports both low-level (RCA) and high-level (speaker wire) inputs.

گھٽ-سطح ان پٽ (RCA)

Figure 6.2: RCA audio input connection.

If your head unit has RCA pre-outs, connect the supplied audio cable (500cm) from the head unit's RCA outputs to the "INPUT" RCA jacks on the subwoofer. This provides the best signal quality.

اعلي سطحي ان پٽ (اسپيڪر تار)

Figure 6.3: High-level speaker wire input connection.

If your head unit does not have RCA outputs, use the high-level input. Connect the speaker wires from your head unit's speaker outputs to the high-level input terminal on the subwoofer. Refer to your head unit's manual for speaker wire polarity.

ان پٽ ليول سوئچ

On the control panel (refer to Figure 2.2), locate the "INPUT LEVEL" switch. Set it to "RCA" if using low-level inputs or "SPK" if using high-level inputs.

7. آپريشن

شروعاتي سيٽ اپ ۽ ترتيبون

After installation, turn on your car's audio system. The subwoofer should power on automatically if the remote wire is connected correctly.

Figure 7.1: Subwoofer control panel for adjustments.

Gain Control (MIN/MAX)

• Adjust the "GAIN" knob to match the output level of your head unit. Start at minimum and slowly increase until the bass blends well with your main speakers without distortion.

Low Pass Filter (LOW PASS 50-150Hz)

• This filter controls the upper frequency limit of the subwoofer. Adjust it to blend smoothly with your main speakers. A common starting point is 80-100Hz.

Bass Boost (0-12dB)

• Use the "BASS BOOST" knob to increase the bass output at a specific frequency. Use sparingly to avoid distortion.

Phase Control (0°/180°)

• The "PHASE" switch helps to align the subwoofer's output with your main speakers. Listen to music with strong bass and switch between 0° and 180° to find the setting that provides the most impactful and cohesive bass.

ريموٽ باس ڪنٽرول

• The included remote bass control allows you to adjust the subwoofer's output level conveniently from the driver's seat without accessing the main unit.

8. سار سنڀال

• سب ووفر کي صاف ۽ مٽي ۽ ملبي کان پاڪ رکو. صفائي لاءِ نرم، سڪل ڪپڙو استعمال ڪريو.
• Ensure all connections remain secure. Periodically check wiring for any signs of wear or damage.
• ذيلي ووفر کي انتهائي گرمي يا نمي کي بي نقاب ڪرڻ کان پاسو ڪريو.
• Do not block the speaker grille or any ventilation openings.

9. مسئلا حل ڪرڻ

If you continue to experience issues, please contact ISUDAR customer support.

10. وارنٽي ڄاڻ

The ISUDAR SU6901 Car Subwoofer comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. Keep your proof of purchase for warranty claims.

11. ڪسٽمر سپورٽ

For further assistance, technical support, or warranty inquiries, please visit the official ISUDAR store or contact their customer service.

Visit the ISUDAR Brand Store on Amazon