JFG RACING Motorcycle Kickstand Assembly User Manual

تعارف

This manual provides essential information for the installation, operation, and maintenance of your JFG RACING Motorcycle Kickstand Assembly. Please read this manual thoroughly before installation and use to ensure proper function and safety. This kickstand is designed for specific motorcycle models to provide stable parking.

پيداوار ختمview

Image: The JFG RACING Motorcycle Kickstand Assembly, showcasing its full structure including the main stand, spring, and mounting bracket.

Image: A labeled view of the kickstand, indicating the "Bike Stand" component and its black color.

خاصيتون

• Designed to provide convenient and stable parking for your motorcycle.
• Ensures correct bicycle tilt for secure standing.
• Sturdy construction for enhanced safety and stability.

مواد

• Constructed from high-quality iron.
• Anodized finish for improved durability.
• Resistant to rust and wear.
• High strength and corrosion resistance.

Image: Graphic illustrating the material properties of the kickstand, highlighting its high-quality iron construction, anodized finish, and resistance to rust, wear, and corrosion.

مطابقت (فٽمينٽ)

This Motorcycle Rear Kickstand Assembly is specifically designed to fit the following models:

• Light Bee Sur-Ron X/S

Image: The kickstand shown installed on a motorcycle, demonstrating its fit and appearance.

Image: Graphic confirming the kickstand's compatibility with Light Bee Sur-Ron X/S models.

تنصيب

The JFG RACING Motorcycle Kickstand Assembly is designed for straightforward installation. No drilling is required for mounting.

تنصيب جا مرحلا:

1. Ensure your motorcycle is securely supported on a stand or by another person before beginning installation.
2. Identify the mounting points on the swingarm of your Light Bee Sur-Ron X/S.
3. Position the kickstand assembly against the swingarm, aligning the mounting holes.
4. Securely attach the kickstand assembly to the swingarm. نوٽ: This product does not include mounting screws. You will need to acquire appropriate screws to fit your Sur-Ron LBX model for proper installation.
5. Ensure all connections are firm and stable before use.
6. Test the kickstand's deployment and retraction to confirm smooth operation and secure standing.

تصوير: هڪ ويجهو تصوير view of the kickstand's mounting bracket, showing the holes for attachment to the motorcycle's swingarm.

Image: Graphic emphasizing the ease of installation, highlighting that no drilling is required and it attaches firmly to the swingarm.

آپريشن

To use the kickstand, simply deploy it downwards until it firmly contacts the ground. Ensure the motorcycle is tilted correctly to achieve a stable and secure standing position. When ready to ride, retract the kickstand fully to prevent interference with vehicle operation.

سار سنڀال

Regular maintenance will prolong the life and ensure the reliable operation of your kickstand assembly.

• صفائي: Periodically clean the kickstand to remove dirt, mud, and road grime. Use a mild detergent and water, then dry thoroughly.
• چڪاس: Regularly inspect the kickstand for any signs of damage, bending, cracks, or excessive wear. Check the spring for proper tension and ensure it is not stretched or broken.
• فاسٽنر چيڪ: Verify that all mounting screws are tight and secure. Re-tighten if necessary.
• لوڻ: Apply a small amount of general-purpose lubricant to the pivot points and spring mechanism to ensure smooth operation and prevent corrosion.

مشڪلاتون

وضاحتون

وارنٽي ۽ سپورٽ

For information regarding product warranty, returns, or technical support, please contact the seller or visit the official JFG RACING store. Keep your purchase receipt as proof of purchase.

Official JFG RACING Store: اسٽور جو دورو ڪريو