How do I record a vinyl album to a USB drive using the TANLANIN TE-2026 record player?

To record your vinyl records to a USB drive using the TANLANIN TE-2026, follow these steps:Insert Media: Plug a USB flash drive into the USB port on the control panel.Prepare the Record: Place your vinyl record on the platter and begin playing it as you normally would.Start Recording: Long press the REC button (which is often the same as the Play/Pause button). The digital display should show "REC" to indicate that recording has started.Stop Recording: Once the album or track is finished, long press the REC button again to stop. The file will be automatically saved to your USB drive in MP3 or WAV format.Note: Ensure the USB drive is properly inserted before you start the record. If you encounter issues, verify that the USB drive is formatted correctly (typically FAT32) and has enough available storage space.

TANLANIN TE-2026 Vintage 3-Speed Bluetooth Portable USB Suitcase Record Player User Manual

تعارف

خريد ڪرڻ لاءِ مهربانيasing the TANLANIN TE-2026 Vintage 3-Speed Bluetooth Portable USB Suitcase Record Player. This manual provides essential information for the safe and efficient operation of your new record player. Please read it thoroughly before use and retain it for future reference.

TANLANIN TE-2026 Record Player open with a vinyl record on the platter

Figure 1: TANLANIN TE-2026 Record Player (Emerald Green)

حفاظتي هدايتون

يونٽ هلائڻ کان اڳ سڀ هدايتون احتياط سان پڙهو.
مستقبل جي حوالي لاء دستياب رکو.
پاڻي جي ويجهو هي اوزار استعمال نه ڪريو.
صرف سڪل ڪپڙي سان صاف ڪريو.
ڪنهن به وينٽيليشن جي سوراخن کي بند نه ڪريو. ٺاهيندڙ جي هدايتن جي مطابق انسٽال ڪريو.
ڪنهن به گرمي جي ذريعن جي ويجهو نصب نه ڪريو جهڙوڪ ريڊيٽرز، گرمي رجسٽر، اسٽو، يا ٻيو سامان (بشمول ampلائفائرز) جيڪي گرمي پيدا ڪن ٿا.
بجليءَ جي تار کي هلڻ يا پنچ ٿيڻ کان بچايو، خاص طور تي پلگ، سهولتن جي رسيپٽيڪل ۽ ان نقطي تي جتي اهي سامان مان نڪرندا آهن.
صرف ٺاھيندڙ طرفان بيان ڪيل منسلڪ / لوازمات استعمال ڪريو.
بجليءَ جي طوفانن دوران يا ڊگھي عرصي لاءِ غير استعمال ٿيڻ دوران ھن ڊوائيس کي ان پلگ ڪريو.
سڀني خدمتن جو حوالو ڏيو قابل خدمت اهلڪارن ڏانهن. خدمت ڪرڻ جي ضرورت پوندي آهي جڏهن سامان ڪنهن به طريقي سان خراب ٿي ويو آهي، جهڙوڪ پاور سپلائي ڪنڊ يا پلگ خراب ٿي ويو آهي، مائع ڦوڪيو ويو آهي يا شيون اپريٽس ۾ گر ٿي ويا آهن، سامان مينهن يا نمي جي سامهون آيو آهي، عام طور تي ڪم نٿو ڪري. ، يا ڇڏيو ويو آهي.

پيڪيج مواد

پڪ ڪريو ته سڀئي شيون انباڪسنگ تي موجود آهن:

1 x Suitcase Record Player
1 x پاور ڪور
1 x Turntable Mat
1 x Spare Needle
1 x استعمال ڪندڙ جو دستياب

پيداوار ختمview

Familiarize yourself with the main components and controls of your record player.

Diagram showing key features of the TANLANIN TE-2026 Record Player including Bluetooth Connectivity, AUX-IN & Headphone Jack, Built-IN Stereo Speakers, 3-Speed Turntable, RCA output, and Compact & Portable design.

شڪل 2: اهم خاصيتون ختمview

ڪنٽرول پينل ۽ ڪنيڪشن

Close-up of the record player's control panel showing the power/volume knob, headphone jack, USB port, TF card slot, and playback control buttons.

شڪل 3: ڪنٽرول پينل جي تفصيل

ٽرنبل ٽيبل: جتي وينائل رڪارڊ رکيل آهي.
ٽون بازو: اسٽائلس (سوئي) کي جهلي ٿو.
اسٽائلس (سوئي): Reads the grooves on the record.
رفتار چونڊيندڙ: Switch between 33 1/3, 45, and 78 RPM.
Power ON/OFF & Volume Knob: Turns the unit on/off and adjusts speaker volume.
هيڊ فون جڪ هيڊفون سان ذاتي طور تي ٻڌڻ لاءِ.
USB پورٽ: USB پلے بیک ۽ رڪارڊنگ لاءِ.
TF ڪارڊ سلاٽ: For TF card playback and recording.
فنڪشن بٽڻ: Play/Pause, Skip tracks, Mode selection (Bluetooth, USB, TF, AUX).
AUX ان پٽ: ٻاهرين آڊيو ڊوائيسز کي ڳنڍيو.
آر سي سي جي پيداوار Connect to external speakers for enhanced sound.

سيٽ اپ ڪريو

يونٽ کوليو: احتياط سان رڪارڊ پليئر کي ان جي پيڪنگ مان هٽايو.
پاور ڪنيڪشن: Connect the power cord to the DC 5V input on the back of the unit, then plug it into a standard wall outlet.
Video 1: TANLANIN Record Player Overview and Setup. This video demonstrates the physical setup and basic features of the record player.
اسٽائلس پروٽيڪٽر هٽايو: Gently remove the white plastic stylus protector from the needle.
Place Turntable Mat: Place the provided turntable mat on the platter.
Position the Tone Arm: Unlock the tone arm from its rest.

آپريٽنگ هدايتون

1. Playing Vinyl Records

پاور آن: Turn the Power ON/OFF & Volume knob clockwise to turn on the unit.
رفتار چونڊيو: Set the speed selector to the appropriate RPM (33 1/3, 45, or 78) for your record.
جڳھ جو رڪارڊ: Carefully place your vinyl record on the turntable platter.
پوزيشن اسٽائلس: Gently lift the tone arm and move it over the desired track on the record. Lower the tone arm slowly onto the record. The music will begin to play.
Figure 4: Stylus on Vinyl Record
حجم کي ترتيب ڏيو: Use the Power ON/OFF & Volume knob to adjust the sound level.
خودڪار اسٽاپ خصوصيت: The turntable will automatically stop spinning at the end of a record.
Finish Playing: When finished, gently lift the tone arm and return it to its rest, then turn off the unit.

2. بلوٽوت پلے بیک

بلوٽوٿ موڊ ڏانهن وڃو: Press the 'M' (Mode) button on the control panel until "BT" appears on the display. The unit will emit a pairing sound.
جوڙ جو سامان: On your Bluetooth-enabled device (smartphone, tablet, etc.), search for "TANLANIN" in the Bluetooth settings and select it to pair.
موسيقي کيڏڻ: Once paired, you can play music from your device through the record player's speakers. Adjust volume using both your device and the record player's volume knob.
شڪل 5: بلوٽوٿ ڪنيڪشن

3. USB/TF Card Playback & Recording

Insert USB/TF Card: Insert a USB drive or TF card into the respective slot. The unit will automatically switch to USB/TF mode.
پلے بیک: Use the function buttons (Play/Pause, Skip) to control music playback from your USB/TF card.
Recording Vinyl to USB/TF:
- Ensure a USB drive or TF card is inserted.
- Start playing your vinyl record.
- Long press the 'REC' button (often combined with Play/Pause) to start recording. The display will show "REC".
- Long press the 'REC' button again to stop recording. The recorded file will be saved to the USB/TF card.
  Figure 6: Vinyl to MP3/WAV Encoding via USB

4. AUX ان پٽ

Connect external audio devices (e.g., MP3 player, CD player) to the AUX input jack using a 3.5mm audio cable. Press the 'M' (Mode) button until "AUX" appears on the display. Audio from the external device will play through the record player's speakers.

Diagram showing various connection options including RCA, Headphone Jack, and AUX input for the record player.

Figure 7: Expanded Connections (AUX, Headphone, RCA)

5. هيڊ فون آئوٽ

For private listening, plug your headphones into the 3.5mm headphone jack. The built-in speakers will automatically mute.

Close-up of the record player's headphone jack with headphones plugged in.

Figure 8: Headphone Jack for Private Listening

سار سنڀال

يونٽ جي صفائي: Use a soft, dry cloth to wipe the exterior of the record player. Avoid abrasive cleaners or solvents.
اسٽائلس جي سنڀال: Handle the stylus with extreme care. Only touch the stylus guard. Clean the stylus periodically with a soft brush, brushing from back to front.
رڪارڊ جي سنڀال: پنهنجا رڪارڊ صاف ۽ مٽيءَ کان پاڪ رکو. انهن کي انهن جي آستين ۾ عمودي طور تي محفوظ ڪريو ته جيئن انهن ۾ وارپنگ نه ٿئي.
اسٽوريج: When not in use, ensure the tone arm is secured with its clip and the lid is closed to protect the components from dust.

مشڪلاتون

مسئلو	ممڪن سبب	حل
طاقت نه آهي	بجلي جي تار ڳنڍيل نه آهي؛ بجلي جو آئوٽليٽ فعال نه آهي.	پڪ ڪريو ته پاور ڪنڊ محفوظ طور تي ڳنڍيل آهي. ٻئي ڊوائيس سان پاور آئوٽليٽ چيڪ ڪريو.
.الهائيندڙن مان آواز ڪونهي	آواز تمام گهٽ آهي؛ هيڊفون ڳنڍيل آهن؛ غلط موڊ چونڊيو ويو آهي.	Increase volume. Disconnect headphones. Press 'M' to select correct mode (Phono, BT, AUX, USB/TF).
گھمڻ وارو نه گھمڻ وارو	Power off; Tone arm not lifted.	Turn on power. Lift tone arm from its rest.
آواز ڇڏڻ يا بگڙيل	Dirty or damaged record; Worn or dirty stylus; Unit not on a stable surface.	Clean record. Check stylus for wear/dirt and clean if necessary. Place unit on a flat, stable surface.
بلوٽوٿ ڳنڍي نه ٿو	Not in Bluetooth mode; Device too far; Device already connected to another unit.	Switch to Bluetooth mode ("BT" on display). Ensure device is within range. Disconnect from other Bluetooth devices.

وضاحتون

ماڊل نالو: ٽي 2026
برانڊ: تانلانين
پيداوار جي ماپ: 15 x 10 x 5 انچ
شيء جو وزن: 5.55 پائونڊ
رفتار: 33 1/3، 45، 78 RPM
رابطي: Bluetooth, USB, TF Card, AUX-in, RCA Out, Headphone Jack
خاص خاصيتون: Digital Display, TF card Recording and Playback, USB Recording and Playback, Built-in Stereo Speakers
مواد: Plastic (with PU leather finish)
رنگ: زمرد سائو

وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the warranty card included in your package or contact TANLANIN customer service directly. Keep your purchase receipt as proof of purchase.

TANLANIN TE-2026