Sunco 6-Inch LED Flush Mount Disc Light Instruction Manual

1. تعارف

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Sunco 6-Inch LED Flush Mount Disc Lights. Please read this manual thoroughly before installation and retain it for future reference.

2. حفاظت جي ڄاڻ

• خبردار: بجلي جي جھٽڪي جو خطرو. انسٽاليشن يا سروسنگ کان اڳ فيوز يا سرڪٽ بريڪر تي بجلي بند ڪريو.
• Installation must be performed by a qualified electrician in accordance with national and local electrical codes.
• فڪسچر کي تبديل يا تبديل نه ڪريو.
• فراهمي جي مقدار کي يقيني بڻائيtagاي فڪسچر جي گهرجن (120 وولٽ) سان مطابقت رکي ٿو.
• Do not handle live wires with bare hands.
• هي پيداوار آهي Damp درجه بندي, suitable for use in bathrooms and other damp locations, but not directly exposed to water.

3. دٻي ۾ ڇا آهي

Each Sunco 6-Inch LED Flush Mount Disc Light package includes the following components:

• LED Disc Light Fixture (12 units per pack)
• TP24 رابط
• E26 Adapter
• Spring Clips (pre-attached or included for installation)
• تار جا نٽ
• چڙهڻ اسڪرو
• ھدايت وارو دستور

4. تنصيب جون هدايتون

The Sunco LED Disc Light offers versatile installation options for both recessed cans (5-inch or 6-inch) and junction boxes.

4.1. اوزار گهربل

• اسڪوائر
• Wire Strippers (if connecting to junction box)
• حفاظتي چشما

4.2. Recessed Can Installation (5-inch or 6-inch)

1. پاور بند ڪريو: Ensure power to the fixture is OFF at the circuit breaker.
2. Remove existing trim: Carefully remove the existing bulb and trim from the recessed can.
3. Connect E26 adapter: Screw the provided E26 adapter into the existing socket of the recessed can.
4. Connect TP24 connector: Plug the TP24 connector from the disc light into the E26 adapter's connector.
5. Adjust spring clips: The spring clips on the disc light can be adjusted for 5-inch or 6-inch cans. Ensure they are set to the correct position for your can size.
6. Insert fixture: Gently push the LED disc light into the recessed can until the spring clips secure it flush with the ceiling.

4.3. جنڪشن باڪس جي انسٽاليشن

1. پاور بند ڪريو: Ensure power to the junction box is OFF at the circuit breaker.
2. تار تيار ڪريو: Strip the ends of the black (live), white (neutral), and green/bare copper (ground) wires from the junction box, if necessary.
3. وائر ڳنڍڻ: Use the provided wire nuts to connect the corresponding wires:
   • Black fixture wire to Black junction box wire.
   • White fixture wire to White junction box wire.
   • Green/Yellow fixture wire to Green/Bare Copper junction box wire.
4. محفوظ فڪسچر: Use the provided mounting screws to attach the disc light's base directly to the junction box.
5. Attach diffuser: Twist the diffuser onto the fixture base until securely fastened.

5. آپريٽنگ هدايتون

5.1. پاور آن/آف

Once installed, restore power at the circuit breaker. The light can be turned on or off using a standard wall switch.

5.2. Selectable Color Temperature (CCT)

This fixture features a selectable CCT switch located on the back of the light. Before final installation, select your desired color temperature from the available options: 3000K (Warm White), 4000K (Cool White), 5000K (Daylight), 6000K (Daylight Deluxe), or 6500K (Daylight Deluxe).

5.3. ڊمنگ ڪارڪردگي

The Sunco LED Disc Light is dimmable from 10% to 100% with compatible LED dimmers. Refer to the compatibility list below for recommended dimmer models.

مطابقت رکندڙ Dimmers:

6. سار سنڀال

The Sunco LED Disc Light is designed for long-lasting performance with minimal maintenance. The LED components are non-removable.

• صفائي: Ensure power is off before cleaning. Wipe the fixture with a soft, damp ڪپڙو. استعمال نه ڪريو abrasive cleaners يا solvents.
• بلب مٽائڻ: This fixture uses integrated LEDs and does not require bulb replacement.

7. مسئلا حل ڪرڻ

8. وضاحتون

9. وارنٽي ۽ سپورٽ

Sunco Lighting offers a 7 سال جي حفاظت warranty on this product. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support. Visit the سنڪو لائيٽنگ اسٽور وڌيڪ معلومات لاءِ.