1. تعارف
This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your SanDisk Professional G-RAID Shuttle 8-Bay 160TB Thunderbolt 3 RAID Array. Please read this guide thoroughly before using the device to ensure optimal performance and data integrity.
2. مصنوعات جون خاصيتون
- وڏي گنجائش: Offers up to 160TB of RAID storage, suitable for demanding workflows.
- High-Speed Data Transfers: Achieves read speeds up to 1900MB/s and write speeds up to 2000MB/s via Thunderbolt 3 (40Gbps) and USB-C (10Gbps), ideal for multi-stream 4K, 8K, and VR editing.
- Built-in Hardware RAID: Pre-configured with RAID 5 for balanced performance, with options to switch to RAID 0, 1, 6, 10, 50, 60, or JBOD for ultimate flexibility.
- Removable, Enterprise-class Ultrastar Hard Drives: Powered by eight removable Ultrastar hard drives for enhanced reliability, suitable for mission-critical footage.
- Daisy-chaining and USB Power Delivery: Connect up to 5 additional devices with dual Thunderbolt 3 ports and power your MacBook with up to 85W USB-C Power Delivery.
3. سيٽ اپ گائيڊ
Follow these steps to set up your G-RAID Shuttle 8:
- ڊوائيس کوليو: Carefully remove the G-RAID Shuttle 8 from its packaging. Ensure all components, including the power cable and Thunderbolt 3 cable, are present.
- ڊوائيس جي پوزيشن: Place the unit on a stable, flat surface with adequate ventilation. Ensure no vents are obstructed.
- پاور Connectنيو: Connect the power cable to the G-RAID Shuttle 8 and then to a grounded electrical outlet.
- Connect to Host Computer: Use the provided Thunderbolt 3 cable to connect the G-RAID Shuttle 8 to your computer's Thunderbolt 3 port. Alternatively, use a USB-C cable for USB-C connections.
- پاور آن: Press the power button on the rear of the unit to turn it on.
- شروعاتي تشڪيل: The device is pre-configured in RAID 5. For other RAID configurations (RAID 0, 1, 6, 10, 50, 60, or JBOD), refer to the SanDisk Professional G-RAID Shuttle 8 software utility for detailed instructions. This utility allows you to manage and monitor your RAID array.
4. آپريٽنگ هدايتون
Once set up, the G-RAID Shuttle 8 operates as a high-capacity external storage device. Your operating system should recognize it as a mounted volume.
- ڊيٽا جي منتقلي: ڇڪيو ۽ ڇڏي ڏيو files to and from the mounted volume as you would with any other external drive. The Thunderbolt 3 connection ensures high-speed transfers.
- RAID Management: Use the dedicated SanDisk Professional G-RAID Shuttle 8 software utility to monitor drive health, change RAID configurations, and manage advanced settings. Changing RAID levels will erase all data on the drives, so ensure data backup before proceeding.
- ڊيزي زنجير: Utilize the dual Thunderbolt 3 ports to connect up to five additional Thunderbolt devices, expanding your workstation's capabilities.
- USB پاور پهچائڻ: The USB-C port can deliver up to 85W of power, allowing you to charge compatible laptops (e.g., MacBooks) directly from the G-RAID Shuttle 8.
5. سار سنڀال
Proper maintenance ensures the longevity and reliability of your G-RAID Shuttle 8.
- باقاعده نگراني: Periodically check the status of your drives and RAID array using the SanDisk Professional software utility. Pay attention to any alerts or warnings.
- Drive Replacement: In the event of a drive failure (especially in RAID 5 or RAID 6 configurations), replace the faulty drive promptly with a compatible Ultrastar enterprise-class hard drive. Refer to the software utility for safe drive replacement procedures.
- صفائي: Keep the unit clean and free of dust. Use a soft, dry cloth to wipe the exterior. Ensure ventilation openings are clear.
- فرم ويئر اپڊيٽس: Check the SanDisk Professional support website for any available firmware updates for your device. Updates can improve performance and stability.
6. مسئلا حل ڪرڻ
If you encounter issues with your G-RAID Shuttle 8, consider the following common solutions:
| مسئلو | ممڪن حل |
|---|---|
| ڪمپيوٽر ڊوائيس کي نه ٿو سڃاڻي | Ensure power cable is securely connected and the unit is powered on. Verify Thunderbolt 3 or USB-C cable connection. Try a different port or cable. Restart your computer. |
| سست ڊيٽا منتقلي جي رفتار | Confirm you are using a Thunderbolt 3 connection for optimal speeds. Check for background processes consuming bandwidth. Ensure drives are healthy via the software utility. |
| Drive failure indication | Identify the failed drive using the software utility. Replace the drive as soon as possible to maintain data redundancy (if configured in RAID 5/6). |
| يونٽ پاور نه ٿي رهيو آهي | Check power cable connections and the power outlet. Ensure the power button is fully pressed. |
For further assistance, refer to the official SanDisk Professional support resources or contact customer support.
7. وضاحتون
- ڊجيٽل اسٽوريج ظرفيت: 160 ٽي بي
- هارڊ ڊرائيو انٽرفيس: USB-C
- رابطي ٽيڪنالاجي: Thunderbolt 3, USB-C
- شئي ماڊل نمبر: G-RAID شٽل 8
- شيء جو وزن: 32 پائونڊ
- پيداوار جي ماپ: 14 x 13 x 21 انچ (LxWxH)
- رنگ: ڪارو
- هارڊ ڊسڪ فارم فيڪٽر: 3.5 انچ
- هارڊ ڊسڪ وضاحت: RAID
- مطابقت رکندڙ ڊوائيسز: ڊيسڪ ٽاپ
- انسٽاليشن جو قسم: خارجي هارڊ ڊرائيو
8. وارنٽي ۽ سپورٽ
The SanDisk Professional G-RAID Shuttle 8-Bay RAID Array is backed by a 5 سالن جي محدود وارنٽي. For detailed warranty terms and conditions, please visit the official SanDisk Professional webسائيٽ.
For technical support, driver downloads, firmware updates, and additional resources, please visit the SanDisk Professional Support Page.
