EVGATSAUTO Universal 12V Car Immobilizer Bypass Module User Manual

تعارف

The EVGATSAUTO Universal 12V Car Immobilizer Bypass Module is designed to bypass the vehicle's immobilizer system, allowing for the use of remote start systems, car alarms, and engine on/off buttons with vehicles equipped with chip keys. This module provides a solution for integrating aftermarket remote start systems without requiring an additional programmed key to be permanently installed in the vehicle.

اهم نوٽ: This module is compatible with most chip key cars. It is not designed for use with other types of immobilizers. Professional installation is recommended.

پيداوار جون خاصيتون

• Bypasses the immobilizer chip on an OEM key or fob to support remote start, car alarm, engine on/off button, and key duplication.
• Features a simple two-wire connection for straightforward installation.
• Designed for universal compatibility with most chip key cars.
• Provides stable performance for reliable operation.

پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• Immobilizer Bypass Module Unit
• Transponder Loop Antenna
• وائرنگ وارن
• چپڙي وارو پيڊ

Image: The complete package contents including the bypass module, transponder loop, wiring, and adhesive pad.

تصوير: هڪ تفصيلي view پيڪيج ۾ شامل سڀني حصن جو.

سيٽ اپ ۽ تنصيب

1. Prepare the Module: Open the bypass module unit. If your vehicle's chip key is larger than the internal space of the module, carefully remove the transponder chip or the entire PCB from your key and place it inside the module's casing. Secure it with the provided double-sided adhesive tape to prevent movement.


Image: The bypass module opened, illustrating the placement of the transponder chip or key PCB inside.

2. وائرنگ هارنس سان ڳنڍيو: Connect the provided two-wire harness to the bypass module. The red wire typically connects to a 12V ignition source, and the black wire to ground. Consult your vehicle's wiring diagram for specific connection points.

Image: The red and black two-wire harness for power and ground connections.
3. Install Transponder Loop: The transponder loop antenna needs to be positioned around the ignition key cylinder. It should go underneath the steering column and up towards the ignition key cylinder. Ensure the loop makes approximately two turns around the vehicle's transponder antenna ring. The vehicle's transponder ring is typically a black plastic ring located around the outside of the ignition lock cylinder where the key is inserted.


Image: The transponder loop antenna, which wraps around the ignition cylinder.

4. ماڊيول کي محفوظ ڪريو: Use the adhesive pad to securely mount the bypass module in a hidden, safe location within the vehicle, away from excessive heat or moisture.


Image: The adhesive pad used for securing the bypass module.

5. ٽيسٽ ڪارڪردگي: After installation, test the remote start or other integrated functions to ensure the immobilizer bypass is working correctly.

انسٽاليشن وڊيو گائيڊ

آپريٽنگ هدايتون

Once correctly installed, the EVGATSAUTO Universal 12V Car Immobilizer Bypass Module operates automatically in conjunction with your remote start or alarm system. When the remote start or alarm system activates, the bypass module will temporarily disable the vehicle's immobilizer, allowing the engine to start. The module remains active only when required by the connected system.

سار سنڀال

The Immobilizer Bypass Module requires minimal maintenance. Ensure the module is securely mounted and all connections remain firm. Periodically check for any signs of wear or damage to the wiring or the transponder loop. Keep the module free from dust and moisture.

مشڪلاتون

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information or technical support, please contact EVGATSAUTO customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.