FULODE MIX-8 8-Channel Professional Audio Mixer Sound Board Console Instruction Manual

1. تعارف

This manual provides detailed instructions for the FULODE MIX-8 8-Channel Professional Audio Mixer Sound Board Console. Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its performance and longevity. The MIX-8 is designed for various audio applications, including live performances, studio recording, and DJ events, offering versatile connectivity and sound processing capabilities.

2. حفاظت جي ڄاڻ

• برقي حفاظت: Always connect the power adapter to a grounded outlet. Do not expose the unit to rain or moisture. Do not remove covers; refer servicing to qualified personnel.
• وينٽيليشن: يونٽ جي چوڌاري مناسب وينٽيليشن کي يقيني بڻايو وڃي ته جيئن وڌيڪ گرميءَ کي روڪي سگهجي.
• لڳائڻ: Place the mixer on a stable, flat surface. Avoid placing it near heat sources or in direct sunlight.
• صفائي: صفائي لاءِ نرم، سڪل ڪپڙو استعمال ڪريو. مائع صاف ڪندڙ يا ايروسول استعمال نه ڪريو.
• بجلي جي فراهمي: Use only the specified power supply (AC 90-240V, 50-60Hz).

3. پيڪيج مواد

Upon unboxing your FULODE MIX-8, please verify that all the following items are included:

• FULODE MIX-8 Audio Mixer Console
• پاور اڊاپٽر
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

4. پراڊڪٽ ختمview

The FULODE MIX-8 is an 8-channel professional audio mixer equipped with a 99-bit DSP digital processor, USB and Bluetooth connectivity, and 48V phantom power. It features individual 3-band equalization for each channel and a 7-band master equalization for comprehensive sound control.

تصوير: مٿي کان هيٺ تائين view of the FULODE MIX-8 8-channel audio mixer, displaying all knobs, faders, and input/output ports.

4.1 Front & Rear Panel Layout

Image: Detailed diagram of the FULODE MIX-8 mixer's front and rear panels, labeling all inputs, outputs, controls, and features.

• Input Channels (1-8): Each channel features XLR/TRS combo jacks for microphone (MIC) or line-level (LINE IN) inputs.
• پريتم پاور (+48V): Individual phantom power switches for condenser microphones on each channel.
• حاصل ڪرڻ جي ترتيب: Controls input sensitivity for each channel.
• 3-بينڊ EQ: High, Mid, and Low frequency adjustments for each channel.
• Pan Balance: چينل جي اسٽيريو پوزيشن کي ترتيب ڏئي ٿو.
• AUX Adjustment: Controls the amount of signal sent to auxiliary outputs.
• Channel Mute Switch: Mutes individual channels.
• Channel Volume Pusher: Fader for individual channel volume control.
• Digital Multi-Effects (DSP FX): Built-in 99 DSP effects with program selection and parameter adjustment.
• 7-بينڊ اسٽيريو گرافڪ برابر ڪندڙ: Master EQ for overall sound shaping.
• USB/MP3 Player: Digital display for U disk playback, with controls for play/pause, song switching, and mode selection.
• بلوٽوت ڪنيڪشن: Wireless connection for audio input from smart devices.
• مکيه پيداوار (L/R): XLR and 6.5mm (1/4") jack outputs for connecting to ampلائفائر يا طاقتور اسپيڪر.
• هيڊ فون آئوٽ: For monitoring audio.
• Power Switch & Interface: Located on the rear panel.

5. سيٽ اپ

5.1 پاور ڪنيڪشن

1. پڪ ڪريو ته مکسر جو پاور سوئچ آف پوزيشن ۾ آهي.
2. Connect the provided power adapter to the mixer's power interface on the rear panel.
3. Plug the power adapter into a suitable AC 90-240V, 50-60Hz power outlet.
4. پاور سوئچ استعمال ڪندي مکسر کي چالو ڪريو.

تصوير: پوئين پاسي view of the FULODE MIX-8 mixer, showing the power input, power switch, and serial number label.

5.2 ان پٽ ڪنيڪشن

The MIX-8 supports various input types:

• مائڪروفون: Connect XLR microphones to the XLR inputs on channels 1-8. For condenser microphones, activate the +48V phantom power switch for the respective channel.
• لائين-ليول ڊوائيسز: Connect instruments (e.g., keyboards, guitars with preamps) or other audio devices using 1/4" TRS or TS cables to the LINE IN inputs.
• USB پلے بیک: MP3 پلے بیک لاءِ USB پورٽ ۾ USB فليش ڊرائيو داخل ڪريو.
• بلوٽوٿ: Pair your smart device via Bluetooth for wireless audio input.

Image: Close-up of the FULODE MIX-8 mixer's input section, showing XLR and 1/4 inch jack connections for microphones and line-level devices, with phantom power indicators.

5.3 آئوٽ پٽ ڪنيڪشن

• مکيه نتيجا Connect the XLR or 6.5mm (1/4") MAIN OUT jacks to your ampلائفائر، طاقتور اسپيڪر، يا رڪارڊنگ انٽرفيس.
• هيڊ فون آئوٽ: نگراني لاءِ هيڊفونز کي فونز جيڪ سان ڳنڍيو.

6. آپريٽنگ هدايتون

6.1 چينل ڪنٽرول

Each input channel (1-8) has dedicated controls:

• حاصل ڪريو Adjust this knob to set the input level for the connected device. Aim for a strong signal without clipping (distortion).
• EQ (هاء، وچ، گهٽ): Use these three knobs to adjust the treble, midrange, and bass frequencies of the individual channel.
• AUX: Controls the amount of signal sent to the auxiliary output.
• ايف ايڪس: Adjusts the amount of signal sent to the internal DSP effects processor.
• پان: Positions the channel's sound in the stereo field (left to right).
• مٽي: Press the MUTE button to silence the channel. The corresponding LED will illuminate when muted.
• چينل فادر: Adjusts the overall volume level of the individual channel.

Image: Close-up of the FULODE MIX-8 mixer's channel controls, showing individual gain, EQ, AUX, FX, PAN knobs, and mute buttons.

6.2 DSP Effects (FX)

The MIX-8 features 99 built-in DSP effects. To select and apply effects:

1. Use the PROGRAM knob to scroll through the 99 available effects, displayed on the digital screen.
2. پنھنجي چونڊ جي تصديق ڪرڻ لاءِ پروگرام نوب کي دٻايو.
3. Adjust the FX knob on each channel to send the desired amount of signal to the effects processor.
4. Use the dedicated FX return fader to control the overall volume of the applied effects.

Image: Close-up of the FULODE MIX-8 mixer's digital multi-effects section, showing the display, program knob, and FX level controls.

6.3 7-بينڊ اسٽيريو گرافڪ برابر ڪندڙ

The master 7-band graphic equalizer allows for fine-tuning the overall output sound:

• Adjust the faders for each frequency band (e.g., 63Hz, 150Hz, 400Hz, 1KHz, 2.5KHz, 6.4KHz, 12KHz) to boost or cut specific frequencies in the main mix.

Image: Close-up of the FULODE MIX-8 mixer's 7-band stereo graphic equalizer, showing the faders for frequency adjustment.

6.4 USB/MP3 Playback and Recording

The integrated USB player supports MP3 files and can also function as a sound card for PC recording:

• پلے بیک: Insert a USB flash drive. Use the MENU button to navigate, and the Play/Pause/Switch songs buttons for control.
• پي سي رڪارڊنگ: Connect the mixer to a computer via USB. The mixer will be recognized as an audio interface, allowing you to record the mixed output directly to your computer.

Image: The FULODE MIX-8 mixer connected to a laptop via USB for recording and playback, with a USB drive inserted.

6.5 بلوٽوٿ وائرليس ڪنيڪشن

بلوٽوت ڊوائيس کي ڳنڍڻ لاء:

1. Press the MODE button on the USB/MP3 player section until "BT" or "Bluetooth" is displayed.
2. On your smart device, search for "BT-5.0" or a similar device name and pair.
3. Once connected, audio from your device will play through the mixer. Use the mixer's controls to adjust volume and effects.

Image: Bluetooth connectivity with the FULODE MIX-8 mixer, showing a smartphone connected wirelessly.

6.6 مانيٽرنگ

Use the PHONES output and its dedicated volume control to monitor the main mix through headphones.

7. سار سنڀال

• صفائي: Regularly wipe the mixer's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• مٽي جي حفاظت: جڏهن استعمال ۾ نه هجي ته مکسر کي ڍڪي رکو ته جيئن مٽي گڏ ٿيڻ کان بچي سگهجي، جيڪو فيڊرز ۽ نوبس کي متاثر ڪري سگهي ٿو.
• اسٽوريج: Store the mixer in a cool, dry place away from extreme temperatures and humidity.
• ڪيبل جو انتظام: Ensure all cables are neatly organized and not under tension to prevent damage to ports.

8. مسئلا حل ڪرڻ

• ڪوبه آواز آئوٽ:
  • سڀني پاور ڪنيڪشنن کي چيڪ ڪريو ۽ پڪ ڪريو ته مکسر آن آهي.
  • Verify that main output faders and channel faders are raised.
  • Ensure no channels are muted (check MUTE LEDs).
  • Confirm that input devices are properly connected and producing a signal.
  • Check connections to speakers/amplifiers and their power/volume.
• Hum or Hissing Noise:
  • پڪ ڪريو ته سڀئي ڪيبل محفوظ طور تي ڳنڍيل آهن ۽ خراب نه آهن.
  • Check for ground loops; try connecting all audio equipment to the same power strip.
  • Reduce gain levels on channels and main output if the noise is excessive.
  • Ensure phantom power is only activated for condenser microphones.
• بلوٽوٿ ڪنيڪشن ناهي:
  • Ensure the mixer is in Bluetooth mode (BT displayed).
  • Check that your smart device's Bluetooth is enabled and within range (approx. 33ft).
  • ڊوائيس کي ختم ڪرڻ ۽ ٻيهر جوڙڻ جي ڪوشش ڪريو.
• USB پلے بیک مسئلا:
  • پڪ ڪريو ته USB ڊرائيو صحيح فارميٽ ٿيل آهي ۽ ان ۾ مطابقت رکندڙ MP3 شامل آهي. files.
  • ڪوشش ڪريو هڪ مختلف USB ڊرائيو.

9. وضاحتون

10. وارنٽي ۽ سپورٽ

FULODE products are manufactured to high-quality standards. For warranty information, please refer to the specific terms provided at the time of purchase or contact FULODE customer support. In case of any issues or questions regarding your MIX-8 mixer, please contact the FULODE Official Shop directly for assistance.

Note: Any operation error may cause the device to have no sound. Please refer to the troubleshooting section or contact support if issues persist.

11. سرڪاري پراڊڪٽ وڊيو