ANMEATE SM530TX Baby Monitor Camera User Manual

تعارف

Welcome to the user manual for your ANMEATE SM530TX Baby Monitor Camera. This device is designed to provide reliable and clear monitoring of your baby, offering peace of mind with its advanced features. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new baby monitor.

Image: The ANMEATE SM530TX Baby Monitor Camera, a white dome-shaped camera with a black lens area, designed for indoor use.

سيٽ اپ ڪريو

Setting up your ANMEATE SM530TX Baby Monitor Camera is designed to be straightforward.

شروعاتي جوڙي

• Ensure both the camera unit and the monitor unit are powered on.
• The units are typically pre-paired from the factory. If not, or if you are adding new cameras, follow the pairing instructions in the monitor's menu.
• Additional camera units can be paired with the ANMEATE SM530 baby monitor in approximately 5 seconds.

جڳت

• Place the camera unit in a secure location that provides a clear view of the monitoring area.
• Ensure the camera is out of reach of children.
• ڪئميرا بهترين پوزيشننگ لاءِ ڀت تي چڙهڻ جي حمايت ڪري ٿو.

آپريٽنگ هدايتون

The ANMEATE SM530TX baby monitor offers various viewing modes, especially when multiple cameras are connected.

Multi-Camera Scan Mode

This mode allows the monitor to automatically cycle through views from multiple connected cameras. The monitor supports up to 4 cameras.

To Turn On Scan Mode:

• Ensure two or more cameras are connected to the monitor.
• کي دٻايو ۽ رکو "ٺيڪ آهي" button on the monitor for 3 seconds.
• "Scan Mode On" will appear on the bottom left of the screen, indicating the mode is active.
• In single-screen mode, the monitor will loop real-time video from up to 4 cameras every 15 seconds.
• In split-screen mode (for 3 or 4 cameras), the monitor will loop video every 30 seconds.

To Turn Off Scan Mode:

• کي دٻايو ۽ رکو "ٺيڪ آهي" button on the monitor for 3 seconds.
• The multi-camera scan mode will turn off, and the camera loop logo at the top of the screen will disappear.

Recommended Scan Mode Usage:

• For 2 cameras, it is recommended to use "Multi-Camera Scan Mode" in single-screen display.
• For 3 or 4 cameras, it is recommended to use "Multi-Camera Scan Mode" in split-screen display.

رات جو نظارو

The ANMEATE SM530TX camera is equipped with night vision capabilities, allowing you to monitor your baby clearly even in low-light or dark conditions. This feature activates automatically when ambient light is insufficient.

سار سنڀال

مناسب سار سنڀال توهان جي ٻار جي مانيٽر جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائي ٿي.

صفائي

• Wipe the camera and monitor units with a soft, dry cloth.
• استعمال نه ڪريو abrasive cleaners يا solvents.
• Ensure the lens is clean for clear image quality.

ذخيرو

• جڏهن گهڻي عرصي تائين استعمال ۾ نه هجي ته ڊوائيس کي ٿڌي، سڪل جاءِ تي رکو.
• سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري رهو.

مشڪلاتون

If you encounter issues with your ANMEATE SM530TX, refer to the following common solutions.

No Image/Signal

• Ensure both the camera and monitor are powered on and fully charged or connected to power.
• Check that the camera and monitor are within range of each other.
• Re-pair the camera and monitor if the connection is lost.

Scan Mode Not Activating/Deactivating

• Verify that you are holding the "OK" button for the required 3 seconds.
• Ensure at least two cameras are connected for scan mode to be available.

خراب تصويري معيار

• ڪئميرا لينس کي نرم ڪپڙي سان نرميءَ سان صاف ڪريو.
• Ensure there are no obstructions between the camera and the monitor.
• Check for strong interference from other wireless devices.

وضاحتون

Key technical specifications for the ANMEATE SM530TX Baby Monitor Camera.

وارنٽي ۽ سپورٽ

For detailed warranty information, please refer to the warranty card or documentation included with your product packaging.

If you require further assistance or have questions not covered in this manual, please contact ANMEATE customer support through their official webسائيٽ يا توهان جي پراڊڪٽ دستاويزن ۾ ڏنل رابطي جي معلومات.