Sinocare Safe-Accu Blood Glucose Monitoring System User Manual

1. تعارف

This user manual provides detailed instructions for the proper use and care of the Sinocare Safe-Accu Blood Glucose Monitoring System. This system is designed for self-testing of blood glucose levels by individuals with diabetes mellitus. Please read this manual thoroughly before using the device to ensure safe and accurate results.

2. اهم حفاظتي ڄاڻ

خبردار:

• This device is for in vitro diagnostic use only. Do not use for diagnosis or screening of diabetes.
• Only use Sinocare Safe-Accu blood glucose test strips with this meter. Using other brands may lead to inaccurate results.
• Keep the device and all components out of reach of children.
• Do not store lancets in the lancing device. Always remove the lancet after use and dispose of it properly.
• Consult your healthcare professional for interpretation of results and for any medical concerns.

The lancet tip is guaranteed sterile while the protective disk is sealed to the base. Do not use if the seal has been damaged or broken.

3. پيڪيج مواد

The Sinocare Safe-Accu Blood Glucose Monitoring System kit includes the following components:

• Sinocare Safe-Accu Blood Glucose Monitor
• Sinocare Safe-Accu Blood Glucose Test Strips (50 count)
• Sinodraw Soft Twist Lancets (50 count)
• Pain-free Lancing Device
• کڻڻ وارو ڪيس
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

Image: The complete Sinocare Safe-Accu Blood Glucose Monitoring System kit, including the white blood glucose meter, a lancing device, vials of test strips, boxes of lancets, and a black carrying case.

4. پراڊڪٽ ختمview

4.1. Sinocare Safe-Accu Blood Glucose Monitor

The monitor features a large display showing time, date, and blood glucose readings. It has control buttons for navigation and memory access.

4.2. Lancing Device

لينسنگ ڊيوائس رت جي چڪاس حاصل ڪرڻ لاءِ استعمال ٿيندي آهي.ample. It allows for adjustable penetration depth to minimize discomfort.

4.3. Test Strips

Sinocare Safe-Accu test strips are code-free, simplifying the testing process. Each strip is designed for single use.

4.4. Lancets

Sterile lancets are used with the lancing device to prick the fingertip for a blood sample. They are single-use only.

5. سيٽ اپ

1. بيٽري داخل ڪريو: Open the battery compartment on the back of the meter and insert two AAA batteries (not included), ensuring correct polarity.
2. تاريخ ۽ وقت مقرر ڪريو: When the meter is first turned on or after battery replacement, the date and time settings may need to be adjusted. Refer to the 'Setting Up Your Meter' section in the full manual for detailed instructions.
3. لينسنگ ڊيوائس تيار ڪريو:
   • لانسنگ ڊوائيس ڪيپ کي ختم ڪريو.
   • Insert a new sterile lancet firmly into the lancet holder.
   • Twist off the protective disk from the lancet.
   • لينسنگ ڊيوائس ڪيپ کي تبديل ڪريو.
   • Adjust the penetration depth by rotating the cap (e.g., 2-3 for average skin).
   • Pull back the cocking control until it clicks, indicating it is ready to use.

6. Operating Instructions (Performing a Blood Glucose Test)

1. هٿ ڌوئڻ: Wash your hands thoroughly with soap and warm water. Dry them completely.
2. داخل ڪريو ٽيسٽ پٽي: Remove a test strip from its vial and immediately close the vial cap tightly. Insert the test strip into the meter's test strip port. The meter will turn on automatically and display a blood drop symbol.
3. رت حاصل ڪريو Sampاليزي: Place the prepared lancing device firmly against the side of your fingertip. Press the release button to prick your finger. Gently milk your finger from the base towards the tip to form a small drop of blood (approximately 0.6 microliters).
4. بلڊ ايس لاڳو ڪريوampاليزي: Touch the tip of the test strip to the blood drop. The blood will be drawn into the strip automatically. Do not apply blood to the top of the strip.
5. نتيجا پڙهو: The meter will begin a countdown (10 seconds). After the countdown, your blood glucose reading will appear on the display.
6. Dispose of Used Materials: Carefully remove the used test strip and lancet. Dispose of them in a puncture-resistant container (sharps container) according to local regulations.

7. سار سنڀال

7.1. ميٽر جي صفائي

Wipe the meter's exterior with a soft, damp cloth. Use a mild detergent if necessary. Do not immerse the meter in water or use harsh cleaning agents.

7.2. اسٽوريج

• Store the meter and test strips in a cool, dry place, away from direct sunlight and heat.
• Keep test strips in their original vial with the cap tightly closed.
• Do not store test strips in extreme temperatures (recommended test temperature: 10°C-35°C).

8. مسئلا حل ڪرڻ

9. وضاحتون

10. وارنٽي ۽ سپورٽ

For warranty information and customer support, please refer to the contact details provided with your product packaging or visit the official Sinocare webسائيٽ. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

ٺاهيندڙ: Changsha Sinocare Inc.

درآمد ڪندڙ (ڀارت): Pts Diagnostics India Pvt. Ltd