First Alert SMI100-AC Hardwire Interconnect Smoke Alarm with Battery Backup Instruction Manual

1. تعارف ۽ اوورview

The First Alert SMI100-AC Hardwire Interconnect Smoke Alarm with Battery Backup is designed to provide early warning in the event of a home fire emergency. This alarm utilizes Precision Detection advanced sensing technology, complying with new industry standards to reduce nuisance alarms while ensuring reliable fire detection. Its hardwire interconnectivity means that when one alarm sounds, all compatible alarms in your system will activate, enhancing overall home safety. The integrated battery backup ensures continuous protection even during power outages.

2. اهم خاصيتون

• Precision Detection Technology: Advanced sensing technology for early warning and reduced nuisance alarms.
• هارڊ وائر انٽر ڪنيڪٽ: When one alarm sounds, all compatible alarms in the system will activate.
• بيٽري جو بيڪ اپ: A 9V alkaline battery provides continuous protection during power outages.
• الارم جو اشارو: Visually identifies the unit that initiated the alarm.
• تڪڙو ڪنيڪٽ پلگ: Facilitates easy installation without the need for rewiring.

3. پيڪيج مواد

پيڪيج ۾ ھيٺيون شيون شامل آھن:

• First Alert SMI100-AC Smoke Alarm
• Easy Adapter Plug
• 9V Alkaline بيٽري
• وڌندڙ خط
• اسڪرو ۽ لنگر
• استعمال ڪندڙ دستي

4. تنصيب ۽ سيٽ اپ

1. حفاظت پهريون: Before beginning installation, ensure the power to the area where the smoke alarm will be installed is turned off at the circuit breaker.
2. چڙهڻ جو هنڌ: Install smoke alarms on every level of your home and in every bedroom. Refer to the diagram below for recommended placement. Avoid installing near windows, doors, or areas with high airflow, which can interfere with smoke detection.
   

   Image: Diagram showing recommended placement of smoke alarms, carbon monoxide alarms, and fire extinguishers in a typical home layout, including bedrooms, hallway, living room, kitchen, basement, and garage.
3. چڙهڻ واري بریکٹ: Attach the mounting bracket to the electrical box using the provided screws and anchors. Ensure the bracket is securely fastened to the ceiling or wall.
4. وائرنگ: Connect the Easy Adapter Plug to your home's existing 120V AC electrical wiring. The alarm is designed for standard hardwire connections.
   

   تصوير: پوئتي view of the First Alert SMI100-AC smoke alarm showing the wiring connection port.

5. بيٽري لڳائڻ: Insert the included 9V alkaline battery into the battery compartment on the back of the alarm. Ensure correct polarity. If there is a battery activation tab, pull it out to activate the battery.
6. الارم لڳايو: Align the smoke alarm with the mounting bracket and twist clockwise until it locks securely into place.
7. پاور بحال ڪريو: Turn on power at the circuit breaker. The green power indicator light on the alarm should illuminate, indicating it is receiving AC power.
8. ٽيسٽ الارم: Press and hold the 'Test/Silence' button on the alarm for a few seconds until the alarm sounds. All interconnected alarms should also sound. Release the button to silence the alarm. Test weekly to ensure proper function.

5. آپريٽنگ هدايتون

• پاور اشارو: A green LED light on the alarm indicates that the unit is receiving AC power and the battery backup is active.
• الارم جو اشارو: When smoke is detected, the alarm will emit a loud siren, and a red LED will flash rapidly. In an interconnected system, all compatible alarms will sound. The specific unit that detected the smoke will have its red LED flashing more frequently to help identify the source.
• خاموشي جي خصوصيت: To temporarily silence a nuisance alarm (e.g., from cooking smoke), press the 'Test/Silence' button. The alarm will silence for approximately 10 minutes before resetting. If smoke is still present after the silence period, the alarm will reactivate.

6. سار سنڀال

• باقاعده جاچ: Test your smoke alarm weekly by pressing the 'Test/Silence' button to ensure it is functioning correctly.
• صفائي: Dust and debris can affect alarm performance. Gently vacuum the alarm's cover and vents monthly using a soft brush attachment. Do not paint the alarm.
• بيٽري مٽائڻ: Replace the 9V alkaline battery annually, or immediately if the low battery chirp sounds.
• يونٽ جي متبادل: Smoke alarms have a limited lifespan. Replace the entire unit at least every 10 years from the date of manufacture. The manufacture date is located on the back of the alarm.
  

  Image: Visual guide for regular testing and replacement of smoke alarms every 10 years.

7. مسئلا حل ڪرڻ

• غلط الارم: If the alarm sounds without apparent smoke, ensure the area is clear of steam, cooking fumes, or excessive dust. Use the silence feature if it's a nuisance alarm.
• Intermittent Chirping: A single chirp every 60 seconds usually indicates a low battery. Replace the battery immediately.
• طاقت ناهي: If the green power indicator is off, check the circuit breaker and ensure the alarm is properly connected to the hardwire.
• Alarm Fails to Test: If the alarm does not sound when the test button is pressed, ensure the battery is correctly installed and fully charged, and that the unit is receiving AC power. If the issue persists, the unit may need to be replaced.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For customer service or technical support regarding your First Alert SMI100-AC smoke alarm, please contact First Alert directly. You can reach their Customer Service Team at 1-800-323-9005 يا سندن سرڪاري دورو ڪريو webسائيٽ تي firstalert.com.