تعارف
This manual provides essential information for the installation, operation, and maintenance of your First Alert SMI100-AC Hardwire Interconnect Smoke Alarm with Battery Backup. This device is designed to provide early warning of smoke and fire hazards in residential environments. It features Precision Detection advanced sensing technology and the ability to interconnect with compatible alarms for whole-home coverage.
اهم حفاظتي ڄاڻ
- خبردار: Turn off power at the circuit breaker before installing or servicing the alarm. Failure to do so may result in electrical shock or injury.
- رنگ نه ڪريو: Painting the alarm may interfere with its ability to detect smoke.
- Test the smoke alarm weekly to ensure proper operation.
- Never disconnect the alarm to silence it. Use the Test/Silence button.
- Replace the alarm unit at least every 10 years from the date of manufacture.
پيڪيج مواد
انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:
- First Alert SMI100-AC Smoke Alarm Unit
- وڌندڙ خط
- Quick Connect Plug with wiring harness
- 9V Alkaline بيٽري
- چڙهڻ اسڪرو ۽ لنگر

Image: Components of the First Alert SMI100-AC smoke alarm, showing the main unit, mounting ring, wiring harness, battery, and screws.
تنصيب
Proper placement and installation are crucial for effective smoke detection.
تجويز ڪيل جڳهه
Install smoke alarms on every level of your home, including basements and in every bedroom. For optimal protection, place alarms in hallways outside sleeping areas and in living rooms. Avoid placing alarms in kitchens, bathrooms, or garages where steam, cooking fumes, or exhaust can cause nuisance alarms.

Image: A diagram showing recommended locations for smoke alarms, carbon monoxide alarms, and fire extinguishers throughout a typical house layout, including bedrooms, hallways, living room, kitchen, basement, and garage.
وائرنگ جون هدايتون
- پاور بند ڪريو: Before installation, ensure the power to the circuit where the alarm will be installed is turned off at the main fuse box or circuit breaker.
- چڙهڻ واري بریکٹ: Secure the mounting bracket to the electrical box using the provided screws. Ensure the bracket is firmly attached.
- وائرنگ ڳنڍڻ: Connect the Quick Connect Plug wiring harness to your household wiring. Typically, this involves connecting black to black (hot), white to white (neutral), and orange to orange (interconnect, if applicable). Use wire nuts to secure connections.
- بيٽري انسٽال ڪريو. Open the battery compartment on the back of the smoke alarm unit. Insert the 9V alkaline battery, ensuring correct polarity (+ to + and - to -). Close the battery compartment.
- الارم يونٽ ڳنڍيو: Plug the Quick Connect Plug into the receptacle on the back of the smoke alarm unit. Align the alarm unit with the mounting bracket and twist clockwise until it locks securely into place.
- پاور بحال ڪريو: Turn the power back on at the circuit breaker. The green power indicator light on the alarm should illuminate, indicating it is receiving AC power.
- ٽيسٽ الارم: Press and hold the Test/Silence button for a few seconds until the alarm sounds. This confirms the unit is functioning correctly.

Image: A close-up of the First Alert SMI100-AC smoke alarm unit, emphasizing the Quick Connect Plug feature for simplified installation.
آپريشن
الارم جي جانچ
Test your smoke alarm weekly to ensure it is operating correctly. Press and hold the Test/Silence button on the alarm cover until the alarm sounds. The alarm will emit a loud, pulsating sound. If the alarm does not sound, refer to the Troubleshooting section.
خاموشي جي خصوصيت
If a nuisance alarm occurs (e.g., from cooking smoke), you can temporarily silence the alarm by pressing the Test/Silence button. The alarm will remain silent for approximately 10 minutes before resetting. If the smoke is still present after the silence period, the alarm will sound again.
Interconnect Feature
When one interconnected alarm detects smoke, all compatible interconnected alarms in your home will sound. This provides an early warning system throughout your residence.
اشارو بتيون
- گرين لائيٽ: Indicates AC power is present. It will flash periodically during normal operation.
- ڳاڙهو لال Flashes rapidly during an alarm condition. It will also flash during the test sequence.

تصوير: هڪ تفصيلي view of the First Alert SMI100-AC smoke alarm's front, highlighting the Test/Silence button and the power indicator light.
سار سنڀال
توهان جي تماڪ جي الارم کي صاف ڪرڻ
Clean your smoke alarm regularly to prevent dust and debris from interfering with its operation. Use a soft brush attachment on your vacuum cleaner to gently remove dust from the alarm's vents. Do not use cleaning solvents or spray directly onto the alarm.
بيٽري مٽائڻ
The 9V battery provides backup power during outages. Replace the battery annually, or immediately if the alarm emits a low battery chirp. To replace the battery:
- Turn off AC power to the alarm at the circuit breaker.
- الارم کي گھڙيءَ جي مخالف طرف موڙيو ته جيئن ان کي ماؤنٽنگ بريڪٽ مان ڪڍي سگهجي.
- بيٽري جو خانو کوليو ۽ پراڻي بيٽري کي هٽايو.
- Insert a new 9V alkaline battery, observing polarity.
- بيٽري جي ڪمري کي بند ڪريو ۽ الارم کي گھڙيال جي طرف گھمائي ماؤنٽنگ بریکٹ سان ٻيهر ڳنڍيو.
- Restore AC power and test the alarm.
End of Life Replacement
Smoke alarms have a limited lifespan. This First Alert SMI100-AC alarm should be replaced 10 years after its manufacture date. The manufacture date is printed on the back of the alarm unit.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| الارم وقفي وقفي سان يا ڪنهن ظاهري سبب کان سواءِ وڄندو آهي. | Nuisance alarm from cooking, steam, or dust. | Press the Test/Silence button. Clean the alarm. Relocate if consistently triggered by non-fire sources. |
| Alarm chirps every 30-60 seconds. | گھٽ بيٽري. | 9V جي بيٽري فوري طور تي تبديل ڪريو. |
| ٽيسٽ دوران الارم نه ٿو وڄي. | No AC power, dead battery, or faulty unit. | Check circuit breaker. Ensure battery is installed correctly and is fresh. Replace the unit if issues persist. |
| سائو ايل اي ڊي بند آهي. | AC پاور ناهي. | سرڪٽ بريڪر ۽ وائرنگ ڪنيڪشن چيڪ ڪريو. |
وضاحتون
- ماڊل: SMI100-AC
- طاقت جو ذريعو: 120V AC, 60Hz, with 9V Alkaline Battery Backup
- سينسر جو قسم: آئنائيزيشن
- الارم جو قسم: تماڪ جي الارم
- پاڻ ۾ ڳنڍڻ: Hardwire interconnect with compatible alarms
- طول و عرض: 5.6"ڊي x 5.6"ڊي x 1"ايڇ
- وزن: تقريبن 9.6 آونس
- آپريٽنگ گرمي پد: 40°F (4.4°C) کان 100°F (37.8°C)
- آپريٽنگ نمي: 10٪ کان 95٪ نسبتي نمي (RH) غير ڪنڊينسنگ
وارنٽي ۽ سپورٽ
For warranty information and technical support, please refer to the documentation included with your product or visit the official First Alert webسائيٽ. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.
آن لائن سپورٽ: www.firstalert.com