پهرين الرٽ SMI100 اسموڪ الارم استعمال ڪندڙ دستياب

تعارف

The First Alert SMI100 Battery-Operated Smoke Alarm is designed to provide early warning of smoke and fire. Equipped with First Alert's Precision Detection advanced sensing technology, it aims to reduce nuisance alarms while ensuring timely alerts in a home fire emergency. This manual provides essential information for the proper installation, operation, and maintenance of your smoke alarm.

اهم حفاظتي ڄاڻ

Please read and understand all instructions before installing and operating your smoke alarm. This alarm is designed for residential use only. Failure to follow these instructions may result in property damage, injury, or death.

• Do not paint the smoke alarm. Paint can clog the sensing chambers and prevent the alarm from operating properly.
• وڌيڪ نمي، انتهائي گرمي پد، يا گهڻي مٽي وارن علائقن ۾ انسٽال نه ڪريو.
• پنهنجي اسموڪ الارم کي هفتيوار جانچيو ته جيئن پڪ ڪري سگهجي ته اهو صحيح طريقي سان ڪم ڪري رهيو آهي.
• Never ignore a smoke alarm. Investigate the cause of the alarm and take appropriate action.
• Replace the smoke alarm unit at least every 10 years from the date of manufacture.

پيڪيج مواد

پڪ ڪريو ته سڀئي شيون توهان جي پيڪيج ۾ موجود آهن:

• First Alert SMI100 Smoke Alarm Unit
• وڌندڙ خط
• چڙهڻ اسڪرو ۽ لنگر
• 9V Alkaline بيٽري
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

The smoke alarm is shown alongside its mounting plate and included screws, illustrating the components needed for installation.

سيٽ اپ ۽ تنصيب

The SMI100 smoke alarm is designed for easy installation. Follow these steps for proper setup:

1. جڳھ چونڊيو: Install smoke alarms on every level of your home, including basements and in every bedroom. For optimal protection, place alarms in hallways outside of sleeping areas. Avoid placing alarms near windows, doors, or air ducts where drafts might interfere with smoke detection.


This diagram illustrates optimal locations for smoke alarms and carbon monoxide alarms throughout a typical home, including bedrooms, hallways, living rooms, kitchens, basements, and garages.

2. بيٽري انسٽال ڪريو: The SMI100 features a front-access battery compartment for easy installation and replacement. Open the battery compartment and insert the included 9V alkaline battery, matching the positive (+) and negative (-) terminals correctly. Close the compartment securely.

The smoke alarm features a convenient front access battery compartment, simplifying battery replacement without needing to remove the unit from its mounting.
3. الارم لڳايو:
   • Mark the location for the mounting bracket on the ceiling or wall.
   • Drill holes and insert the plastic anchors if necessary.
   • مهيا ڪيل اسڪرو استعمال ڪندي چڙهڻ واري بریکٹ کي ڳنڍيو.
   • Align the smoke alarm with the mounting bracket and twist clockwise until it locks into place.
4. الارم ٽيسٽ: After installation, press and hold the Test/Silence button on the front of the alarm until you hear a loud, piercing alarm sound. This confirms the unit is functioning correctly.

آپريٽنگ هدايتون

Your First Alert SMI100 Smoke Alarm is designed for simple operation:

• عام آپريشن: The power indicator light (LED) will flash approximately once every 40-60 seconds to indicate that the smoke alarm is receiving power and functioning correctly.
• الارم جي حالت: When smoke is detected, the alarm will sound a loud, continuous siren. The LED will flash rapidly.
• خاموشي جي خصوصيت: In case of a nuisance alarm (e.g., from cooking smoke), press the Test/Silence button. This will temporarily silence the alarm for approximately 10 minutes. The alarm will automatically reset after this period if the smoke has cleared. If smoke is still present, the alarm will reactivate.
• الارم جي جاچ: Test your smoke alarm weekly by pressing and holding the Test/Silence button until the alarm sounds. Release the button once the alarm sounds.


A person is shown pressing the test button on a ceiling-mounted smoke alarm, demonstrating regular testing procedure.

سار سنڀال

Regular maintenance ensures your smoke alarm remains in optimal working condition:

• بيٽري مٽائڻ: When the 9V battery is low, the alarm will chirp approximately once every minute. Replace the battery immediately. Use only a 9V alkaline battery. The front access battery compartment makes this process simple.
• صفائي: Clean your smoke alarm at least once a month. Use a soft brush or vacuum cleaner with a soft brush attachment to remove dust and debris from the alarm's vents. Do not use cleaning solvents or spray directly onto the alarm.
• زندگي جي خاتمي جي خبرداري: The alarm has a lifespan of approximately 10 years. After 10 years from the date of manufacture, the unit will emit an end-of-life warning chirp (usually 5 chirps every minute). This indicates it's time to replace the entire smoke alarm unit.


A woman holds a smoke alarm, illustrating the importance of replacing units at least every 10 years for optimal safety.

مشڪلاتون

If your smoke alarm is not functioning as expected, refer to the following common issues and solutions:

If you continue to experience issues, please contact First Alert customer support.

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information or technical support, please contact First Alert customer service. You can typically find contact details on the manufacturer's webسائيٽ تي يا پراڊڪٽ پيڪنگنگ تي.

Visit the official First Alert Store for more information: First Alert Store