VISLONE Mini Bench Drill Press Instruction Manual

1. تعارف ۽ اوورview

This manual provides essential information for the safe and effective operation of your VISLONE Mini Bench Drill Press. Please read it thoroughly before initial use and retain it for future reference. This mini bench drill press is designed for precision drilling tasks in various materials such as wood, metal, and plastic, suitable for DIY enthusiasts and small workshop applications.

شڪل 1: ختمview of the VISLONE Mini Bench Drill Press, highlighting key specifications like input voltage ، آئوٽ وولٽtage, rated power, speed range, drilling stroke, and chuck specification.

2. حفاظت جي ڄاڻ

باهه، بجليءَ جي جھٽڪي ۽ ذاتي زخمن جي خطري کي گهٽائڻ لاءِ هميشه بنيادي حفاظتي احتياطن تي عمل ڪريو. پنهنجي ڪم واري علائقي کي صاف ۽ چڱي طرح روشن رکو. بجلي جا اوزار ڌماڪيدار ماحول ۾ نه هلايو، جهڙوڪ ٻرندڙ مائع، گئسون، يا مٽي جي موجودگي ۾. بجلي جا اوزار هلائڻ دوران ٻارن ۽ ويٺي ماڻهن کي پري رکو.

• Wear appropriate safety glasses or goggles.
• Secure the workpiece firmly before drilling to prevent movement.
• Ensure the drill bit is correctly installed and tightened in the chuck.
• Do not force the tool; let the drill press work at its intended speed.
• Disconnect the power supply before changing accessories or performing maintenance.
• ڍِلا ڪپڙا يا زيور جيڪي هلندڙ حصن ۾ ڦاسي سگهن ٿا، انهن کان پاسو ڪريو.

3. پيڪيج مواد

Verify that all items listed below are present in your package. If any parts are missing or damaged, contact customer support.

• 1 x VISLONE Mini Bench Drill Press
• 1 x Power Adapter (with regional plug)

Figure 2: The Mini Bench Drill Press and its included power adapter, ready for connection.

4. وضاحتون

Refer to the following technical specifications for your VISLONE Mini Bench Drill Press:

Figure 3: The drill press features 7 adjustable speeds and a maximum drilling depth of 40mm for versatile applications.

5. سيٽ اپ

Follow these steps to set up your Mini Bench Drill Press:

1. پيڪنگ کولڻ: پيڪنگ مان سڀني حصن کي احتياط سان هٽايو. ٽرانسپورٽ دوران ڪنهن به نقصان جي چڪاس ڪريو.
2. لڳائڻ: Place the drill press on a stable, level, and clean workbench. The thickened aluminum alloy base is designed to reduce vibration and movement.
3. پاور ڪنيڪشن: Connect the power adapter to the drill press. Ensure the correct plug type is used for your region. Plug the adapter into a suitable power outlet.
4. چڪ جي انسٽاليشن: The B12 chuck (1.5-10mm) is pre-installed. Ensure it is securely fastened.

Figure 4: The power adapter is available with various plug options (UK, EU, AU, US) to suit different regional power outlets.

6. آپريٽنگ هدايتون

Familiarize yourself with the controls and functions before operating the drill press.

6.1 Installing a Drill Bit

1. Ensure the drill press is unplugged from the power source.
2. Insert the desired drill bit into the chuck jaws.
3. Tighten the chuck securely using the chuck key (if applicable) to prevent the bit from slipping during operation.

6.2 رفتار کي ترتيب ڏيڻ

The drill press features 7 adjustable speeds (1000-4500 rpm). Adjust the speed according to the material being drilled and the drill bit size. Lower speeds are generally used for harder materials and larger drill bits, while higher speeds are suitable for softer materials and smaller bits.

6.3 Adjusting Drilling Depth

The maximum drilling stroke is 40mm. To set the drilling depth, loosen the depth stop lock, adjust the depth stop to the desired measurement, and then tighten the lock.

6.4 Drilling Operation

1. Secure the workpiece firmly on the base plate using clamps يا هڪ vise.
2. پاور اڊاپٽر ۾ پلگ ان ڪريو.
3. ڊرل پريس کي چالو ڪريو.
4. Slowly lower the drill bit into the workpiece using the feed handle. Apply steady, even pressure.
5. هڪ دفعو گهربل کوٽائي پهچي وڃي، ڊرل بٽ کي ورڪ پيس مان ڪڍيو.
6. Turn off the drill press and unplug it after use.

Figure 5: The drill press in operation, demonstrating its capability for precision drilling in wood.

Figure 6: The versatility of the drill press for various materials, including metal, wood, plastic, and for crafting beads.

7. سار سنڀال

باقاعده سار سنڀال توهان جي ڊرل پريس جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائي ٿي.

• صفائي: After each use, unplug the tool and clean off any dust, chips, or debris from the machine, especially around the chuck and motor area. Use a soft brush or compressed air.
• لوڻ: Periodically apply a light machine oil to moving parts, such as the column and quill, to ensure smooth operation.
• چڪاس: Regularly inspect the power cord for any damage. Check all fasteners for tightness.
• اسٽوريج: Store the drill press in a clean, dry place away from moisture and direct sunlight.

8. مسئلا حل ڪرڻ

If you encounter issues with your drill press, refer to the following common problems and solutions:

9. وارنٽي ۽ سپورٽ

VISLONE products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official VISLONE webسائيٽ. ڪنهن به وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.