VECYS Hot and Cold Water Cooler Dispenser Instruction Manual

1. تعارف

This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your VECYS Hot and Cold Water Cooler Dispenser. Please read this manual thoroughly before using the appliance and retain it for future reference.

تصوير 1.1: سامهون view of the VECYS Hot and Cold Water Cooler Dispenser.

The VECYS water cooler dispenser is designed to provide instant access to both hot and cold water. It features a high-efficiency compressor for rapid cooling and heating, a child safety lock for hot water, and a durable 304 stainless steel inner water tank for water purity.

2. اهم حفاظتي ڄاڻ

To reduce the risk of injury or property damage, always follow basic safety precautions when using electrical appliances. Read all instructions before using this dispenser.

• برقي حفاظت: Ensure the dispenser is connected to a grounded electrical outlet with the correct voltage. Do not use extension cords.
• Childارن جي حفاظت لاڪ: The hot water spout is equipped with a child safety lock. Always engage this lock when not in use to prevent accidental burns.
• لڳائڻ: ڊسپينسر کي سڌي سج جي روشني ۽ گرمي جي ذريعن کان پري هڪ فليٽ، مستحڪم مٿاڇري تي رکو. يونٽ جي چوڌاري مناسب وينٽيليشن کي يقيني بڻايو.
• پاڻي جي معيار: Use only potable water. Do not operate the dispenser without a water bottle installed.
• سار سنڀال: صفائي ڪرڻ يا ڪا به سار سنڀال ڪرڻ کان اڳ ڊسپينسر کي ان پلگ ڪريو.

Image 2.1: Key features of the water cooler, highlighting the child safety lock and ETL listing for safety.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• VECYS Hot and Cold Water Cooler Dispenser Unit
• ڊريپ ٽري
• هدايت نامو (هي دستاويز)

4. سيٽ اپ ۽ تنصيب

پنھنجي پاڻي جي ڊسپينسر کي سيٽ ڪرڻ لاءِ ھيٺين قدمن تي عمل ڪريو:

1. پيڪ ڪريو: احتياط سان ڊسپينسر کي ان جي پيڪنگ مان هٽايو.
2. لڳائڻ: Place the dispenser upright on a level, stable surface. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation.
3. صاف: Wipe down the exterior of the dispenser and the drip tray with a soft, damp ڪپڙو.
4. ڊريپ ٽري انسٽال ڪريو: Slide the drip tray into its designated slot below the spouts.
5. پاڻي جي بوتل لوڊ ڪريو: Remove the cap from a 3 or 5-gallon water bottle. Carefully lift the bottle and place it onto the anti-dust mite water barrel seat on top of the dispenser. Ensure the bottle is seated firmly and water begins to flow into the dispenser's reservoirs.
6. سسٽم کي پرائم ڪريو: Before plugging in, dispense water from both the hot and cold spouts until water flows continuously. This removes air from the system.
7. پلگ ان: پاور ڪنڊ کي گرائونڊ ٿيل برقي آئوٽ سان ڳنڍيو.
8. گرم ڪرڻ/ٿڌو ڪرڻ کي چالو ڪريو: Locate the hot and cold power switches on the back of the unit. Turn them ON. The indicator lights on the front will illuminate.

Image 4.1: Dispenser dimensions and a view of the anti-dust mite water barrel seat for bottle placement.

5. آپريٽنگ هدايتون

Your VECYS water dispenser provides instant hot and cold water once properly set up and powered on.

5.1 گرم پاڻي پهچائڻ

• Place a cup under the red (hot water) spout.
• To dispense hot water, simultaneously press the child safety lock button and push down the hot water lever.
• وهڪري کي روڪڻ لاءِ ليور ڇڏايو.

5.2 Cold Water Dispensing

• Place a cup under the blue (cold water) spout.
• Push down the cold water lever to dispense cold water.
• وهڪري کي روڪڻ لاءِ ليور ڇڏايو.

Image 5.1: Details on hot water (195℉-203℉, 4L capacity) and cold water (42℉-50℉, 2L capacity).

Image 5.2: Visual representation of temperature settings for hot and cold water.

6. سار سنڀال

باقاعده صفائي ۽ سار سنڀال توهان جي پاڻي جي ڊسپينسر جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائيندي.

6.1 ٻاهران صاف ڪرڻ

• ڊسپينسر کي پاور آئوٽليٽ مان ڪڍو.
• ٻاھرين سطحن کي نرم سان صاف ڪريو، ڊيamp ڪپڙو. استعمال نه ڪريو abrasive cleaners يا solvents.
• Clean the drip tray and grill regularly. Remove the drip tray, empty any collected water, wash with mild soap and water, rinse thoroughly, and dry before reinserting.

6.2 Cleaning the Water Reservoirs (Descaling)

It is recommended to clean the internal reservoirs every 3-6 months to prevent mineral buildup.

• ڊسپينسر کي انپلگ ڪريو ۽ پاڻي جي بوتل کي هٽايو.
• Drain all water from both hot and cold spouts.
• Prepare a cleaning solution (e.g., a mixture of water and food-grade citric acid or white vinegar).
• Pour the cleaning solution into the top reservoir.
• محلول کي 15-30 منٽن تائين ويهڻ ڏيو.
• Drain the solution completely from both spouts.
• Rinse the reservoirs thoroughly by filling with clean water and draining several times until no cleaning solution odor remains.
• Reinstall a fresh water bottle and plug in the dispenser.

Image 6.1: Illustration of the internal food-grade 304 stainless steel hot and cold water tanks, designed for water purity.

7. مسئلا حل ڪرڻ

عام مسئلن ۽ انهن جي حل لاءِ هيٺ ڏنل جدول جو حوالو ڏيو.

8. وضاحتون

Technical details for the VECYS Hot and Cold Water Cooler Dispenser Model BY557:

Image 8.1: Illustration of the built-in refrigerating compressor, emphasizing fast cooling, low noise, and low energy consumption.

9. وارنٽي ۽ سپورٽ

Your VECYS water cooler dispenser is backed by a 1 سال وارنٽي خريداري جي تاريخ کان. هي وارنٽي عام استعمال هيٺ مواد ۽ ڪاريگري ۾ خرابين کي ڍڪيندي آهي.

For warranty claims, technical assistance, or any questions regarding your product, please contact VECYS customer service. Our after-sale service and technical team are available to respond to your inquiries.

Please have your model number (BY557) and purchase information ready when contacting support.