BN-LINK Countdown Timer Switch (Model CP-U211C) User Manual

تعارف

Thank you for choosing the BN-LINK Countdown Timer Switch (Model CP-U211C). This device is designed to provide convenient, energy-saving control for your exhaust fans, bathroom fans, and various lighting types. By automating shut-off operations, it helps reduce energy consumption and improve convenience in your home or office.

Please read this manual thoroughly before installation and operation to ensure proper use and safety.

اهم حفاظتي ڄاڻ

خبردار: برقي جھٽڪو جو خطرو.

• Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and systems.
• Always turn off power at the circuit breaker or fuse box before installing or servicing the switch.
• This device requires a neutral wire for operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
• For single-pole applications only. Do not use with 3-way or multi-way switches.
• پڪ ڪريو ته سڀئي تار ڪنيڪشن محفوظ ۽ صحيح طرح سان موصل آهن.
• ڊوائيس جي وڌ ۾ وڌ برقي درجه بندي کان وڌيڪ نه ڪريو.
• آپريٽنگ جلدtage: 125V, 60 Hz.
• Current Rating: 15A/1875W Resistive or General Purpose, 10A/1250W Ballast or Tungsten, ½ HP, TV-5.

سيٽ اپ ۽ تنصيب

This section provides instructions for installing your BN-LINK Countdown Timer Switch. Ensure power is OFF before proceeding.

پيڪيج مواد:

• BN-LINK Countdown Timer Switch
• وال پليٽ
• چڙهڻ اسڪرو
• تار جا نٽ

اوزار گھربل (شامل نه آھي):

• اسڪرو ڊرائيور (فلپس ۽ فليٽ هيڊ)
• تار پٽيندڙ
• برقي ٽيپ
• جلدtagاي جاچ ڪندڙ

تنصيب جا مرحلا:

1. پاور بند ڪريو: Locate the circuit breaker controlling the switch you are replacing and turn it OFF. Verify power is off using a voltagاي جاچ ڪندڙ.
2. پراڻو سوئچ هٽايو: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal.
3. تارن جي سڃاڻپ ڪريو: Identify the following wires in your wall box:
   • گرم تار (لائن): عام طور تي ڪارو، سرڪٽ بريڪر مان بجلي آڻيندو آهي.
   • لوڊ وائر: Typically black, sends power to the light/fan.
   • غير جانبدار تار: Typically white. A neutral wire is REQUIRED for this switch.
   • زميني تار: عام طور تي سائو يا ننگو ٽامي.
4. Wire the New Switch: Connect the wires from your wall box to the BN-LINK timer switch using the provided wire nuts. Refer to the wiring diagram below.
   • ڳنڍيو ڪاري تار from the timer switch to the Hot Wire (Line) from the wall box.
   • ڳنڍيو ڳاڙهو تار from the timer switch to the لوڊ تار from the wall box.
   • ڳنڍيو اڇي تار from the timer switch to the غير جانبدار تار from the wall box.
   • ڳنڍيو گرين تار from the timer switch to the گرائونڊ تار from the wall box.
5. سوئچ کي محفوظ ڪريو: Carefully fold the wires and push the timer switch into the wall box. Secure it with the mounting screws.
6. وال پليٽ انسٽال ڪريو: Attach the provided wall plate over the switch.
7. پاور بحال ڪريو: سرڪٽ بريڪر تي بجلي واپس آن ڪريو.
8. ٽيسٽ آپريشن: Test the timer switch to ensure it functions correctly.

تصوير: Wiring diagram for the BN-LINK Countdown Timer Switch. This diagram illustrates the connection points for the ground wire (green), load wire (red), hot wire (black), and neutral wire (white) to the timer switch. A clear warning states "Neutral Wire Must Required."

آپريٽنگ هدايتون

The BN-LINK Countdown Timer Switch features intuitive touch controls for easy operation.

تصوير: سامهون view of the BN-LINK Countdown Timer Switch, highlighting the "Touch ON/OFF Button" at the top and the six "Touch to select time" buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour). LED indicators are also shown, indicating which countdown is active.

بٽڻ افعال:

• پاور بٽڻ (مٿي): This is the main ON/OFF button.
  • Press once to turn the connected device (light/fan) ON indefinitely.
  • Press again to turn the connected device OFF.
  • This button can also override any active countdown timer, turning the device OFF immediately.
• Countdown Timer Buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour): These buttons activate a preset countdown.
  • Press any of these buttons to turn the connected device ON for the selected duration.
  • The device will automatically turn OFF once the countdown expires.
  • An LED indicator next to the selected time will illuminate to show the active countdown.

Exampاستعمال:

To turn on your bathroom fan for 10 minutes, simply press the "10 Min" button. The fan will run for 10 minutes and then automatically shut off. If you need to turn it off sooner, press the top Power button.

ورسٽائل ايپليڪيشنون

The BN-LINK Countdown Timer Switch is suitable for a wide range of applications, enhancing convenience and energy efficiency in various areas of your home or business.

تصوير: A collage of four images demonstrating common applications for the timer switch: a bathroom, a closet, a laundry room, and a garage. This illustrates the versatility of the product in different environments.

• باٿ روم: Control exhaust fans to reduce humidity and prevent mold growth.
• Closets & Pantries: Automatically turn off lights after a set time, preventing wasted energy.
• گيراج: Manage lighting or ventilation systems.
• Laundry Rooms: Control exhaust fans or lighting.
• Spas & Enclosed Patios: Conveniently manage lighting or small ventilation units.

This timer switch is compatible with incandescent, fluorescent, and LED lighting, as well as bathroom exhaust fans and heaters within its specified electrical ratings.

سار سنڀال

The BN-LINK Countdown Timer Switch requires minimal maintenance.

• صفائي: To clean the surface of the switch, gently wipe with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.
• چڪاس: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
• ڪوبه استعمال ڪندڙ-خدمت وارو حصو: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the unit yourself.

مشڪلاتون

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact BN-LINK Customer Support.

وضاحتون

تصوير: Detailed dimensions of the BN-LINK Countdown Timer Switch and its accompanying wall plate. The image shows the height (5 inches for plate, 2.76 inches for switch body), width (3.3 inches for plate, 1.57 inches for switch body), and depth (1.73 inches for switch body).

وارنٽي ۽ سپورٽ

BN-LINK products are designed to meet high-quality standards. For warranty information or technical support, please contact BN-LINK customer service.

Please have your model number (CP-U211C) and purchase date available when contacting support.

رابطي جي ڄاڻ:

• Refer to the BN-LINK official webتازي رابطي جي تفصيل لاءِ سائيٽ يا پراڊڪٽ پيڪنگنگ.
• Online support may be available through the BN-LINK brand store on Amazon or their official webسائيٽ.