VISLONE 100W Mini Table Saw

تعارف

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your new VISLONE 100W Mini Table Saw. Please read this manual thoroughly before initial use to ensure proper handling and to maximize the lifespan of your tool. Keep this manual for future reference.

حفاظت جي ڄاڻ

بجلي جا اوزار هلائڻ وقت هميشه حفاظت کي ترجيح ڏيو. انهن هدايتن تي عمل ڪرڻ ۾ ناڪامي جي نتيجي ۾ اوزار کي سخت زخم يا نقصان ٿي سگهي ٿو.

• سڀئي هدايتون پڙهو: Familiarize yourself with the tool's functions and operating procedures before use.
• مناسب ذاتي حفاظتي سامان (PPE) پائڻ: هميشه حفاظتي چشمو، ٻڌڻ جي حفاظت، ۽ مٽيءَ جو ماسڪ پائڻ. ڍِلا ڪپڙا يا زيور پائڻ کان پاسو ڪريو جيڪي حرڪت ڪندڙ حصن ۾ ڦاسي سگهن ٿا.
• هڪ محفوظ ڪم ماحول کي يقيني بڻائي: Keep your work area clean, well-lit, and free from clutter. Do not operate the saw in damp يا گندي حالتون.
• ورڪ پيس کي محفوظ ڪريو: هميشه clamp or secure the material being cut to prevent movement during operation.
• هٿ صاف رکو: Never place hands near the saw blade while the tool is powered on or connected to power.
• Unplug when not in use or during maintenance: Always disconnect the power cord before changing blades, making adjustments, or performing any maintenance.
• صحيح بليڊ استعمال ڪريو: Ensure the saw blade is appropriate for the material being cut and is securely installed.
• Avoid forcing the tool: Allow the saw to cut at its own pace. Forcing it can lead to kickback or damage.
• ٻارن جي نگراني: This tool is not a toy. Keep children and unauthorized persons away from the operating area.

پيڪيج مواد

Carefully unpack the box and ensure all items are present and undamaged. If any items are missing or damaged, contact customer support immediately.

• Mini Table Saw Unit
• پاور اڊاپٽر
• اسڪوائر
• Wrenches (Hex Wrench)
• ڊرل چيڪ
• محسوس ٿيل ڦيٿي
• Sponge Wheel
• Sticky Wheel
• Titanium-plated Emery Saw Blade
• Resin Saw Blade
• Steel Saw Blade
• Alloy Saw Blade
• Sanding Pieces
• لچڪدار شافٽ
• ڏاڪا پٿر
• سينڊنگ پيپرز
• محسوس ٿيل پالش ڪرڻ واريون
• Sanding Slim Bands
• سينڊنگ بينڊ
• ڪٽڻ واري ڊسڪ
• Small Sanding Papers
• سينڊنگ ڊرم
• Wheel Mandrel
• Felt Mandrel
• Stone Grinding Bits
• برش
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

ساخت جو تعارف

Familiarize yourself with the main components of the mini table saw:

تصوير جي وضاحت: This diagram illustrates the key parts of the mini table saw, including the safety bezel, miter fence, saw blade (lifting mechanism), switch, power socket, heat dissipation holes, cold rolled steel panel, miter gauge, dust collection port, and stainless steel feet.

• Safety Bezel: Transparent guard to protect against debris.
• Miter Fence: Adjustable guide for precise angle cuts.
• Saw Blade (Lifting): The cutting blade with an adjustable height mechanism.
• سوئچ: پاور آن / آف بٽڻ.
• پاور ساکٽ پاور اڊاپٽر لاءِ ڪنيڪشن پوائنٽ.
• گرمائش جو سوراخ: Vents for cooling the motor.
• Cold Rolled Steel Panel: Durable and stable work surface.
• ميٽر گيج: Scale for setting cutting angles.
• مٽي گڏ ڪرڻ پورٽ: Outlet for connecting a dust extraction system.
• Stainless Steel Feet: Anti-slip and shock-absorbing feet for stability.

سيٽ اپ ڪريو

1. شروعاتي چڪاس

Before connecting to power, inspect the saw for any visible damage. Ensure all components are securely fastened.

2. پاور ڪنيڪشن

Connect the provided power adapter to the power socket on the saw and then plug it into a suitable electrical outlet (240V). Ensure the power switch is in the 'OFF' position before plugging in.

3. Installing the Miter Fence

The miter fence is crucial for accurate cuts. Align the scales on both sides when installing the miter fence, then tighten the screws to secure it. This allows for precise 90-degree or 45-degree angle cutting.

تصوير جي وضاحت: This image demonstrates how to install the miter fence, showing alignment with the scales for both 90-degree and 45-degree angle cutting. The maximum cut width is 3.54 inches (9 cm).

4. Adjusting Saw Blade Height

The saw blade's cutting depth can be adjusted from 0 to 16mm. Use the included hex wrench to adjust the blade height. Rotate clockwise to lift the blade and counter-clockwise to lower it. This allows for precise and flexible cutting operations.

تصوير جي وضاحت: This image highlights the adjustable saw blade mechanism, showing how to raise and lower the blade using a hex wrench. It also illustrates the accurate scale for precise measurements and the safety bezel.

آپريٽنگ هدايتون

1. پاور آن/آف

To turn the saw on, press the red power switch. To turn it off, press the switch again.

2. رفتار کي ترتيب ڏيڻ

The saw features a 7-speed adjustable motor with a maximum speed of 6000 RPM. Use the speed control dial to select the appropriate speed for your material and cutting task. Lower speeds are generally better for harder materials or more precise cuts, while higher speeds are suitable for softer materials.

3. Adjusting Cutting Depth and Angle

As mentioned in the setup, the cutting depth can be adjusted using the hex wrench. The cutting angle can be adjusted from 0° to 90° using the miter gauge. Ensure both are set correctly and securely before beginning a cut.

4. Material Compatibility and Blade Selection

This mini table saw is designed for small items and is suitable for materials such as PCB boards, wooden sticks, plastic sheets, thin wooden boards, cans, copper-clad panels, aluminum tubes, and copper tubes. Select the appropriate saw blade from the included accessories for the material you are cutting:

• PCB Cutting Blades: For circuit boards.
• High-Speed Steel Saw Blades: General purpose for wood and plastic.
• Alloy Saw Blades: For harder materials.
• Resin Saw Blades: For specific cutting needs, often for metal or stone.

تصوير جي وضاحت: This image displays four different types of circular saw blades: a titanium-plated emery saw blade, a high-speed steel saw blade, an alloy saw blade, and a resin saw blade, each suitable for different materials.

5. Using the Flexible Shaft

The flexible shaft extends the functionality of your table saw, allowing for detailed grinding, polishing, and drilling. It can hold drilling heads with a shank diameter of 0.5-3.2mm.

تصوير جي وضاحت: This image shows the flexible shaft attachment in use, demonstrating its capability to hold various grinding heads for detailed work, such as polishing a small stone.

تصوير جي وضاحت: This image provides a close-up of the precision drill chuck, highlighting its clamping range of 1.5-10mm, and shows various attachments like sanding drums, brushes, and polishing wheels that can be used with it.

سار سنڀال

Regular maintenance ensures the longevity and optimal performance of your mini table saw.

• صفائي: After each use, unplug the saw and use a brush or compressed air to remove sawdust and debris from the motor vents, blade area, and work surface.
• بلڊ جي سنڀال: Inspect blades for wear, damage, or dullness. Replace dull or damaged blades immediately. Clean resin and pitch buildup from blades using a suitable blade cleaner.
• لوڻ: Periodically apply a small amount of light machine oil to moving parts, such as the blade lifting mechanism, to ensure smooth operation.
• اسٽوريج: Store the saw in a clean, dry place, away from direct sunlight and extreme temperatures.
• تار جي چڪاس: Regularly check the power cord for any cuts, fraying, or damage. Do not use the saw if the cord is damaged.

مشڪلاتون

If you encounter issues with your mini table saw, refer to the following common problems and solutions:

وضاحتون

Refer to the table below for detailed technical specifications of the VISLONE Mini Table Saw:

تصوير جي وضاحت: هي تصوير هڪ بصري ڏيک فراهم ڪري ٿيview of the product's dimensions and key parameters, including cutting depth, speed, motor wattage, cutting angle, and speed mode.

وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the product packaging or contact VISLONE customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.