Dexter 5-inch 800W Angle Grinder

1. تعارف

Thank you for choosing the Dexter 800AG2-125.5AB1 Angle Grinder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

This angle grinder is designed for cutting and grinding metal and various coatings. Its 800W motor delivers 11,500 RPM, accommodating 4.1/2" / 5" (115/125mm) discs. The tool features a 3-meter power cord for extended reach and an ergonomic grip for comfortable handling.

2. حفاظتي هدايتون

بجلي جا اوزار هلائڻ وقت باهه، بجليءَ جي جھٽڪي، ۽ ذاتي زخمن جي خطري کي گهٽائڻ لاءِ هميشه بنيادي حفاظتي احتياطن تي عمل ڪريو.

• مناسب ذاتي حفاظتي سامان (پي پي اي) پائڻ: Always wear safety glasses, hearing protection, and gloves. A dust mask is recommended for dusty operations.
• ڪم ڪار کي محفوظ ڪريو: Always clamp يا آپريشن دوران حرڪت کي روڪڻ لاءِ ورڪ پيس کي محفوظ ڪريو.
• Maintain a clean work area: Cluttered areas invite accidents. Ensure your workspace is well-lit.
• خطرناڪ ماحول کان بچو: Do not use power tools in damp or wet locations, or expose them to rain. Keep the work area well-ventilated.
• ٻارن ۽ مسافرن کي پري رکو: All visitors should be kept a safe distance from the work area.
• بيڪار اوزار اسٽور ڪريو: When not in use, tools should be stored in a dry, high, or locked-up place, out of reach of children.
• اوزار کي زور نه ڏيو: It will do the job better and more safely at the rate for which it was designed.
• صحيح اوزار استعمال ڪريو: Do not force a small tool or attachment to do the job of a heavy-duty tool.
• خراب ٿيل حصن جي چڪاس ڪريو: Before using the tool, check for any damaged parts. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center.
• بجلي منقطع ڪريو: Always disconnect the tool from the power source before making any adjustments, changing accessories, or storing the tool.
• معاون هينڊ استعمال ڪريو: Always operate the angle grinder with the auxiliary handle securely attached for maximum control.

3. پراڊڪٽ ختمview

Familiarize yourself with the components of your Dexter Angle Grinder.

شڪل 1: مجموعي طور view of the Dexter Angle Grinder, highlighting its powerful motor suitable for heavy-duty tasks.

شڪل 2: Detail of the power switch, indicating the tool's robust power for demanding work.

شڪل 3: View of the disc mounting area, designed for simple and quick disc changes.

شڪل 4: Close-up of the spindle lock button, essential for secure disc changes.

شڪل 5: The ergonomic handle design, ensuring light and comfortable use.

شامل اجزاء:

• 1 x Dexter 5" Angle Grinder
• 1 x رنچ
• 1 x معاون هٿ
• 1 x Disc Guard 115mm
• 1 x Disc Guard 125mm

4. سيٽ اپ

4.1 Attaching the Disc Guard

1. پڪ ڪريو ته گرائنڊر پاور سورس کان ڌار ٿيل آهي.
2. Select the appropriate disc guard (115mm or 125mm) for your chosen disc size.
3. Position the disc guard over the spindle housing, ensuring it aligns with the mounting points.
4. Secure the guard firmly using the provided screws or clamping mechanism. Ensure it is oriented to provide maximum protection during operation.

4.2 معاون هينڊل کي انسٽال ڪرڻ

The auxiliary handle can be attached in three different positions (left, right, or top) to suit your working preference and ensure optimal control.

شڪل 6: Angle grinder with auxiliary handle attached, providing enhanced control and precision.

1. Identify the threaded holes on the grinder's gear housing.
2. Screw the auxiliary handle clockwise into the desired position until it is securely tightened.

4.3 Mounting a Grinding/Cutting Disc

1. پڪ ڪريو ته گرائنڊر پلگ ان ٿيل آهي.
2. Press and hold the spindle lock button (Figure 4) to prevent the spindle from rotating.
3. اندروني فلانج کي اسپنڊل تي رکو.
4. Position the grinding or cutting disc onto the inner flange, ensuring it sits flat.
5. Screw the outer flange onto the spindle, hand-tightening it.
6. Use the provided wrench to firmly tighten the outer flange, ensuring the disc is securely mounted. Release the spindle lock button.

5. آپريٽنگ هدايتون

5.1 پاور آن/آف

1. To turn on the grinder, slide the power switch (Figure 2) forward.
2. To turn off the grinder, slide the power switch backward to the 'OFF' position.

5.2 پيسڻ ۽ ڪٽڻ جون ٽيڪنڪون

Always hold the grinder firmly with both hands, using the main handle and the auxiliary handle.

شڪل 7: Angle grinder in use, demonstrating its effectiveness for cutting metal profiles and coatings.

شڪل 8: Angle grinder being used for sanding a wooden surface, showcasinان جي ورسٽائلٽي.

• پيسڻ لاءِ: Hold the grinder at an angle of approximately 15-30 degrees to the workpiece. Apply moderate pressure and move the tool evenly across the surface.
• For Cutting: Hold the grinder perpendicular to the workpiece. Allow the disc to cut through the material without forcing it. Ensure the workpiece is stable and supported.
• اوور لوڊنگ کان پاسو ڪريو: Do not apply excessive pressure, as this can reduce disc life and motor efficiency.
• Allow the tool to reach full speed: Before making contact with the workpiece, allow the disc to reach its full operating speed.

6. سار سنڀال

باقاعده سار سنڀال توهان جي اينگل گرائنڊر جي ڊگهي عمر ۽ محفوظ آپريشن کي يقيني بڻائي ٿي.

• صفائي: مٽيءَ جي جمع ٿيڻ کان بچڻ لاءِ وينٽيليشن جي سوراخن کي باقاعدي طور تي صاف ڪريو، جيڪو گرم ٿيڻ جو سبب بڻجي سگهي ٿو. نرم برش يا دٻيل هوا استعمال ڪريو.
• ڪاربن برش: This tool uses a brushed motor. Carbon brushes are wear parts and should be checked periodically. If they are worn down, they must be replaced by qualified personnel.
• پاور ڪنڊ: Inspect the power cord for any damage before each use. Do not use the tool if the cord is damaged.
• ڊسڪ جي متبادل: Replace worn or damaged discs immediately. Always use discs rated for the grinder's speed and application.
• اسٽوريج: اوزار کي سڪل، محفوظ جاءِ تي، ٻارن جي پهچ کان پري رکو.

7. مسئلا حل ڪرڻ

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact your local Dexter authorized service center. Keep your purchase receipt as proof of purchase.