VEVOR Gas Pressure Washer 170D User Manual

1. تعارف

Thank you for choosing the VEVOR Gas Pressure Washer Model 170D. This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your pressure washer. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

This gas-powered pressure washer is designed for various cleaning tasks, offering a maximum pressure of 3400 PSI (239.04 kgf/cm²) and a flow rate of 10 L/min. It is suitable for cleaning vehicles, fences, patios, driveways, and other outdoor surfaces.

Figure 1.1: VEVOR Gas Pressure Washer 170D in use, demonstrating its powerful water spray for effective cleaning.

2. حفاظت جي ڄاڻ

Always observe basic safety precautions when using this product to reduce the risk of injury or damage. Failure to follow these instructions may result in serious injury or property damage.

2.1 عام حفاظتي ڊيڄاريندڙ

• سڄو دستورالعمل پڙهو: Understand all operating instructions and warnings before use.
• مناسب حفاظتي سامان پائڻ: Always wear eye protection (safety glasses or goggles), hearing protection, and protective clothing.
• ٻارن ۽ پالتو جانورن کي پري رکو: Do not allow children or untrained individuals to operate the pressure washer.
• Operate in a well-ventilated area: The engine produces carbon monoxide, which is a colorless, odorless, and poisonous gas.
• Fuel handling: Handle gasoline with extreme care. Store fuel in approved containers and never refuel a hot or running engine.
• High-pressure spray: Never direct the spray at people, animals, electrical devices, or the unit itself. The high pressure can cause severe injury.
• مستحڪم سطح: پريشر واشر کي هڪ مستحڪم، سطحي مٿاڇري تي هلايو ته جيئن ٽپڻ کان بچي سگهجي.
• نقصان جي چڪاس ڪريو: Before each use, inspect the unit, hoses, and nozzles for any damage. Do not operate if damaged.

3. پيڪيج مواد

تصديق ڪريو ته هيٺ ڏنل سڀئي شيون توهان جي پيڪيج ۾ شامل آهن. جيڪڏهن ڪو به پرزو غائب يا خراب آهي، ته VEVOR ڪسٽمر سروس سان رابطو ڪريو.

• Gas Pressure Washer Unit (main body with engine and pump)
• High-Pressure Hose (26 ft / 8 m)
• اسپري گن
• ڇنڊڇاڻ
• Quick-Connect Nozzles (5 types: 0°, 15°, 25°, 40°, Soap Nozzle)
• ڦيٿي (2)
• مجلس سنڀاليو
• 8-10 Wrench (1)
• فلپس اسڪرو ڊرائيور (1)
• Spark Plug Socket and Socket Bar (1)

شڪل 3.1: ختمview of the VEVOR Gas Pressure Washer 170D and its included accessories.

4. سيٽ اپ ۽ اسيمبلي

پنهنجي پريشر واشر کي پهرين استعمال لاءِ گڏ ڪرڻ ۽ تيار ڪرڻ لاءِ انهن قدمن تي عمل ڪريو.

4.1 اسيمبلي

1. ڦيٿا ڳنڍيو: Securely attach the two wheels to the main frame using the provided hardware.
2. هينڊل انسٽال ڪريو: Slide the handle assembly into the designated slots on the main unit and secure it with the locking pins or bolts.
3. هاء پريشر نلي سان ڳنڍيو: Connect one end of the high-pressure hose to the pump outlet on the pressure washer and the other end to the spray gun. Ensure connections are tight.
4. Attach the Wand: اسپري وينڊ کي اسپري گن سان ڳنڍيو.

4.2 ٻارڻ ۽ تيل

The engine is shipped without oil or fuel. You must add both before starting the unit.

• انجڻ جو تيل شامل ڪريو: Remove the oil fill cap/dipstick. Add the recommended engine oil (refer to engine manual for type and capacity) until it reaches the full mark on the dipstick. Do not overfill.
• گئسولين شامل ڪريو: Fill the fuel tank with fresh, unleaded gasoline (minimum 87 octane). Do not overfill. Leave space for fuel expansion.

4.3 پاڻي ڪنيڪشن

• Connect a garden hose (minimum 5/8 inch diameter) to the water inlet on the pressure washer.
• Ensure the garden hose is free of kinks and has a steady water supply.
• پاڻي جي فراهمي مڪمل طور تي چالو ڪريو.
• Squeeze the trigger on the spray gun to purge air from the pump and hose until a steady stream of water emerges. This prevents damage to the pump.

شڪل 4.1: تفصيلي view of the 210cc 4-stroke engine and axial cam pump, highlighting key components for setup.

5. آپريٽنگ هدايتون

پنهنجي پريشر واشر جي محفوظ ۽ اثرائتي آپريشن لاءِ انهن قدمن تي عمل ڪريو.

5.1 انجڻ شروع ڪرڻ

1. Ensure the water supply is fully on and all air is purged from the system.
2. انجن جي سوئچ کي "آن" پوزيشن ڏانهن ڦيرايو.
3. Move the choke lever to the "CHOKE" position (cold engine).
4. Move the fuel valve to the "ON" position.
5. ريڪوئل اسٽارٽر هينڊل کي مضبوطيءَ سان ڇڪيو جيستائين انجن شروع نه ٿئي.
6. هڪ ڀيرو انجڻ شروع ٿئي، آهستي آهستي چوڪ ليور کي "رن" پوزيشن ڏانهن منتقل ڪريو.

5.2 Using Nozzles

The pressure washer comes with 5 quick-connect nozzles for various applications.

• 0° ڳاڙهو نوزل: Concentrated, high-impact jet for tough stains and hard-to-reach areas. Use with extreme caution.
• 15° پيلو نوزل: Narrow spray for intensive cleaning of small areas.
• 25° سائو نوزل: Medium spray for general cleaning of most surfaces.
• 40° اڇو نوزل: Wide spray for gentle cleaning of delicate surfaces.
• Black Soap Nozzle: ڊٽرجنٽ لڳائڻ لاءِ گهٽ دٻاءُ وارو اسپري.

To change nozzles, pull back the collar on the quick-connect fitting at the end of the wand, insert the desired nozzle, and release the collar. Ensure the nozzle is securely seated before operating.

Figure 5.1: The five quick-connect nozzles and their corresponding spray angles and applications.

5.3 Detergent Application

• Fill the detergent tank with pressure washer safe detergent.
• Attach the black soap nozzle to the spray wand.
• Start the engine and squeeze the trigger. The detergent will be drawn from the tank and mixed with the water at low pressure.
• ڊٽرجنٽ لڳائڻ کان پوءِ، مٿاڇري کي چڱيءَ طرح ڌوئڻ لاءِ هڪ هاءِ پريشر نوزل ​​(مثال طور، 25° يا 15°) تي سوئچ ڪريو.

5.4 بند ڪرڻ

1. انجڻ جي سوئچ کي بند ڪريو.
2. ٻارڻ والو بند ڪريو.
3. پاڻي جي فراهمي کي بند ڪريو.
4. سسٽم ۾ باقي دٻاءُ ڇڏڻ لاءِ اسپري گن ٽرگر کي دٻايو.
5. باغ جي نلي ۽ اعلي دٻاء واري نلي کي ختم ڪريو.

Figure 5.2: The extended reach provided by the 26 ft (8 m) high-pressure hose, allowing for versatile cleaning applications.

6. سار سنڀال

Regular maintenance ensures optimal performance and extends the life of your pressure washer. Always disconnect the spark plug wire before performing any maintenance.

6.1 انجڻ جي سار سنڀال

• انجن آئل چيڪ ڪريو: هر استعمال کان اڳ تيل جي سطح چيڪ ڪريو. آپريشن جي پهرين 5 ڪلاڪن کان پوءِ تيل تبديل ڪريو، پوءِ هر 50 ڪلاڪن يا سال ۾ هڪ ڀيرو.
• صاف ايئر فلٽر: Inspect the air filter every 25 hours or more often in dusty conditions. Clean or replace as needed.
• Check Spark Plug: اسپارڪ پلگ جو ساليانو يا هر 100 ڪلاڪن ۾ معائنو ڪريو. جيڪڏهن ضروري هجي ته صاف ڪريو يا تبديل ڪريو.

6.2 پمپ جي سار سنڀال

• صاف پاڻي جي داخل ٿيڻ جو فلٽر: Regularly check and clean the screen filter on the water inlet to prevent debris from entering the pump.
• سياري ڪرڻ: If storing the pressure washer in freezing temperatures, use a pump protector or RV antifreeze to prevent damage to the pump.

6.3 Hose and Nozzle Maintenance

• هوز جو معائنو ڪريو: Regularly check the high-pressure hose and garden hose for cuts, leaks, or damage. Replace if necessary.
• نلڪن کي صاف ڪريو: If a nozzle becomes clogged, use the included nozzle cleaning tool to clear any obstructions.

7. مسئلا حل ڪرڻ

هي حصو انهن عام مسئلن جو حل فراهم ڪري ٿو جيڪي توهان کي منهن ڏيڻو پئجي سگهي ٿو.

8. وضاحتون

Technical specifications for the VEVOR Gas Pressure Washer Model 170D.

• برانڊ: VEVOR
• ماڊل: 170D
• طاقت جو ذريعو: گيسولين تي هلندڙ
• انجڻ: 210cc 4-stroke, 7 HP
• وڌ ۾ وڌ دٻاء: 3400 PSI (239.04 kgf/cm²)
• وڌ ۾ وڌ وهڪري جي شرح: 10 ايل / منٽ
• هاء پريشر نيل ڊگھائي: 26 فوٽ (8 م)
• نوزل: 5 Quick-Connect (0°, 15°, 25°, 40°, Soap Nozzle)
• پيداوار جي ماپ (L x W x H): 52.5 x 72 x 87 سينٽي (20.67 x 28.35 x 34.25 انچ)
• شيء جو وزن: 58.03 پائونڊ (26.32 ڪلوگرام)
• UPC: 197988808220

Figure 8.1: Dimensional drawing and key specifications of the VEVOR Gas Pressure Washer 170D.

9. وارنٽي ۽ سپورٽ

For warranty information, technical support, or to order replacement parts, please contact VEVOR customer service. Keep your purchase receipt and product model number handy for faster service.

توهان عام طور تي VEVOR آفيسر تي سپورٽ رابطي جي معلومات ڳولي سگهو ٿا webسائيٽ تي يا پنهنجي پرچون ڪندڙ ذريعي.