FULODE STUDIO22+ UHF Wireless In-Ear Monitor System User Manual

1. تعارف

Thank you for choosing the FULODE STUDIO22+ UHF Wireless In-Ear Monitor System. This system provides reliable, high-quality mono audio monitoring for musicians, singers, and stage performers. Operating on the UHF 550–579.25 MHz band with 100 preset frequencies, it ensures stable performance and freedom of movement. Please read this manual thoroughly before operation to ensure proper setup and optimal performance.

تصوير 1.1: مٿيview of the FULODE STUDIO22+ Wireless In-Ear Monitor System, showing the transmitter, bodypack receiver, and in-ear headphones.

2. پيڪيج مواد

پڪ ڪريو ته هيٺ ڏنل سڀئي شيون توهان جي پيڪيج ۾ شامل آهن:

• 1 x Wireless Desktop Transmitter
• 2 x Wireless Bodypack Receivers
• 2 x In-Ear Headphones
• 2 x Enhanced Antennas
• 1 x 6.35mm آڊيو ڪيبل
• 1 x پاور اڊاپٽر
• 1 x استعمال ڪندڙ دستياب (هي دستاويز)

تصوير 2.1: تفصيلي view of the package contents and dimensions of the main units.

3. سيٽ اپ جون هدايتون

3.1. ٽرانسميٽر سيٽ اپ

1. پاور Connectنيو: Connect the included power adapter to the DC 12V input on the rear panel of the transmitter and plug it into a power outlet.
2. Antennas ڳنڍڻ: Screw the two enhanced antennas onto the ANTENNA connectors on the rear panel of the transmitter. Position them vertically for optimal signal reception.
3. آڊيو ان پٽ: Connect your audio source (e.g., mixer, audio interface) to the transmitter's audio input jacks (AF IN L/R) using XLR or 6.35mm cables. The rear panel also provides a 6.35mm mixed input and an independent audio input.
4. Rackmount Installation (Optional): If desired, attach the included rackmount brackets to the sides of the transmitter for secure installation in a standard equipment rack.

3.2. Bodypack Receiver Setup

1. بيٽرين کي انسٽال ڪريو. Open the battery compartment on the back of the bodypack receiver and insert two AA batteries (not included), ensuring correct polarity.
2. ائرفون ڳنڍيو: Plug the in-ear monitoring headphones into the 3.5mm PHONES jack on the top of the bodypack receiver.

Image 3.1: Wiring schematic illustrating connections for the transmitter, audio mixer, and bodypack receiver.

4. آپريٽنگ هدايتون

4.1. پاور آن/آف

• ٽرانسميٽر: ڊگھو دٻايو پاور يونٽ کي آن يا آف ڪرڻ لاءِ فرنٽ پينل تي بٽڻ.
• باڊي پيڪ رسيور: گھمايو حجم potentiometer clockwise to turn the receiver on. Rotate counter-clockwise until it clicks to turn off.

4.2. فريڪوئنسي ۽ چينل جي چونڊ

The system operates on 100 preset frequencies within the UHF 550–579.25 MHz band. Ensure the transmitter and receiver are set to the same group and channel for proper communication.

4.2.1. Transmitter Channel Setting

1. گروپ جي چونڊ: کي دٻايو سيٽ button once. Use the left or right arrow buttons to select the desired group.
2. چينل چونڊ: کي دٻايو سيٽ button twice. Use the left or right arrow buttons to select the desired channel within the chosen group.

Image 4.1: Controls and display for adjusting group and channel settings on the transmitter unit.

4.2.2. Bodypack Receiver Channel Setting

1. گروپ جي چونڊ: کي دٻايو سيٽ button once. Use the مٿي / هيٺ buttons to select the desired group. Press اي ايس سي to confirm or exit.
2. چينل چونڊ: کي دٻايو سيٽ button twice. Use the مٿي / هيٺ buttons to select the desired channel. Press اي ايس سي to confirm or exit.

Image 4.2: Controls and display for adjusting group and channel settings on the bodypack receiver.

4.3. حجم جي ترتيب

Adjust the monitoring volume using the حجم potentiometer on the bodypack receiver. Start with a low volume and gradually increase to a comfortable listening level.

4.4. مانيٽرنگ ڪارڪردگي

The system provides stable mono in-ear monitoring with clear, low-latency audio. The centered sound helps reduce phase issues, feedback, and ambient interference, making it ideal for reliable stage monitoring, vocals, and speech applications. The wireless range extends up to 262 feet (80 meters) in optimal conditions.

Image 4.3: Illustration of the system's wireless reception range, indicating up to 260ft.

5. سار سنڀال

• صفائي: Use a soft, dry cloth to clean the surfaces of the transmitter and receivers. Avoid using liquid cleaners or solvents.
• اسٽوريج: Store the system in a dry, cool place away from direct sunlight and extreme temperatures.
• بيٽري جي سنڀال: Remove batteries from the bodypack receivers if the system will not be used for an extended period to prevent leakage and damage.
• اينٽينا جي سنڀال: موڙڻ يا ٽٽڻ کان بچڻ لاءِ اينٽينن کي احتياط سان هٿ ڪريو.

6. مسئلا حل ڪرڻ

7. وضاحتون

8. وارنٽي ڄاڻ

The FULODE STUDIO22+ In-Ear Monitor System comes with a 2-سال وارنٽي from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official FULODE webسائيٽ يا ڪسٽمر سپورٽ سان رابطو ڪريو.

9. ڪسٽمر سپورٽ

If you encounter any issues or have questions regarding your FULODE STUDIO22+ In-Ear Monitor System that are not addressed in this manual, please contact FULODE customer support. You can typically find contact information on the official FULODE webسائيٽ يا پرچون ڪندڙ ذريعي جتي توهان پراڊڪٽ خريد ڪيو آهي.

Please have your model number (STUDIO22+) and purchase details ready when contacting support.