تعارف
Thank you for choosing the Elitech TM-2TH Digital Thermometer Hygrometer. This device is designed for precise monitoring of temperature and humidity in various environments, including refrigerators, freezers, wine cabinets, and more. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.
پيداوار جون خاصيتون

The Elitech TM-2TH offers precision monitoring with a temperature range of -10°C to 50°C and a humidity range of 10% to 95% RH. It features ultra-long battery life, flexible installation options, and a °C/°F toggle function.

This device provides high accuracy with ±1°C temperature accuracy and ±5% RH precision (within 30%~85% RH range), ensuring reliable readings for critical environments.

The TM-2TH automatically records and displays maximum and minimum temperature and humidity values, allowing users to track environmental fluctuations over time.

Designed for versatility, the thermometer hygrometer can be installed in three ways: hanging via its integrated hook, standing on a flat surface, or magnetically attached to metal surfaces.

The TM-2TH is suitable for a wide range of applications, including monitoring conditions in wine cabinets, medicine cabinets, refrigerators, camping boxes, and baby's fridges.
وضاحتون
| ماڊل | TM-2TH |
| درجه حرارت جي حد | -10 ° C کان 50 ° C (14 ° F کان 122 ° F) |
| درجه حرارت جي درستگي | ±1°C (±1.8°F) |
| نمي واري حد | 10٪ کان 95٪ RH |
| نمي جي درستگي | ±5% RH (within 30%~85% RH) |
| بيٽري جو قسم | 1 x CR2032 (شامل) |
| پيداوار جو حوالو | TM-2TH-2Pack |
| پيڪيج جا طول و عرض (تقريبن) | 15.4 x 9.5 x 6.5 سينٽي |
| پئڪيج جو وزن (تقريبن) | 90 گرام |
| اصل جو ملڪ | چين |
سيٽ اپ ڪريو
1. بيٽري لڳائڻ
- ڊوائيس جي پوئين پاسي بيٽري جي ڪمپارٽمينٽ ڪَوَر کي ڳوليو.
- Open the cover by sliding or gently prying it off.
- Insert one CR2032 battery, ensuring the positive (+) side faces upwards.
- Replace the battery compartment cover securely. The device should power on automatically and display current temperature and humidity.
2. رکڻ
The TM-2TH offers multiple placement options:
- بيٺل: Use the integrated kickstand to place the device on any flat surface.
- لٽڪائڻ: Utilize the built-in hook to hang the device from a rack or hook.
- مقناطيسي: Attach the device to any metallic surface, such as a refrigerator door, using its magnetic backing.
Choose a location that provides accurate readings for the area you wish to monitor, avoiding direct sunlight or heat sources.
آپريٽنگ هدايتون
1. Reading Display
Upon activation, the device will display the current temperature and relative humidity. The temperature is typically shown in degrees Celsius (°C) or Fahrenheit (°F), and humidity as a percentagاي (٪).
2. گرمي پد يونٽن کي تبديل ڪرڻ (°C/°F)
Locate the °C/°F button, usually on the back or side of the device. Press this button to toggle between Celsius and Fahrenheit temperature units.
3. Viewing MAX/MIN Records
The device automatically records the highest (MAX) and lowest (MIN) temperature and humidity values since the last reset. To view these records:
- کي دٻايو MAX/MIN button once to display the maximum recorded values.
- کي دٻايو MAX/MIN button again to display the minimum recorded values.
- Press it a third time to return to the current temperature and humidity display.
4. Resetting MAX/MIN Records
To clear the recorded MAX/MIN values and start a new recording cycle:
- جڏهن ته viewing the MAX or MIN records, press and hold the MAX/MIN تقريبا 3 سيڪنڊن لاء بٽڻ.
- The display will flash, indicating that the records have been reset to the current temperature and humidity.
سار سنڀال
1. بيٽري مٽائڻ
When the display becomes dim or the device stops functioning, it is time to replace the CR2032 battery. Follow the battery installation steps in the "Setup" section to replace the battery.
2. صفائي
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water. Ensure the sensor openings are free from dust and debris for accurate readings.
3. اسٽوريج
If the device will not be used for an extended period, remove the battery to prevent leakage and store it in a cool, dry place.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڪابه ڊسپلي يا مدھم ڊسپلي ناهي | بيٽري ختم ٿي وئي آهي يا غلط طور تي نصب ٿيل آهي. | Replace the CR2032 battery or ensure it is installed with correct polarity. |
| غلط پڙھڻ | Sensor blocked or device placed near heat/cold source. | Ensure sensor openings are clear. Relocate the device to a more representative area. Allow time for readings to stabilize. |
| MAX/MIN values not resetting | بٽڻ ڪافي ڊگهو نه رکيو. | Press and hold the MAX/MIN button for at least 3 seconds until the display flashes. |
وارنٽي ۽ سپورٽ
Elitech provides a standard warranty for its products. For specific warranty terms, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Elitech webسائيٽ. مھرباني ڪري وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
Official Elitech Webسائيٽ: www.elitechlog.com