NANWEI Cordless HVLP Paint Sprayer

تعارف

This manual provides essential information for the safe and efficient operation, maintenance, and care of your NANWEI Cordless HVLP Paint Sprayer, Model WMD73. Please read all instructions carefully before use to ensure optimal performance and user safety.

Figure 1: NANWEI Cordless HVLP Paint Sprayer in operation.

حفاظت جي ڄاڻ

خبردار: Always wear appropriate safety gear, including gloves and eye protection. Avoid inhaling paint fumes. Keep the sprayer away from heat sources and open flames. Do not use with flammable materials. Clean the sprayer thoroughly after use and dispose of paint and cleaning materials responsibly.

پيڪيج مواد

پڪ ڪريو ته هيٺ ڏنل سڀئي شيون توهان جي پيڪيج ۾ شامل آهن:

• 1 x Cordless spray gun
• 2 x 4.0Ah Batteries
• 1 x چارجر
• 1 x 1200ml tank
• 4 x نوزل ​​(1.55 ملي ميٽر، 1.8 ملي ميٽر، 2.2 ملي ميٽر، 2.6 ملي ميٽر)
• 2 x فلٽر
• 1 x فنل
• 1 x Nozzle cleaning needle
• 1 x صفائي برش
• 1 x استعمال ڪندڙ دستياب

پيداوار جون خاصيتون

• هاءِ پاور موٽر: Equipped with a 40000RPM motor for ultra-fine atomization and efficient coverage.
• ورسٽائل Nozzles: Includes 4 nozzles (1.55mm, 1.8mm, 2.2mm, 2.6mm) for various paint types and applications.
• ترتيب ڏيڻ واري اسپري جا نمونا: Offers 3 spray patterns (horizontal, vertical, circular) for precise application.
• ٻٽي بيٽري سسٽم: Comes with two 20V 4.0Ah lithium-ion batteries for extended, cordless operation.
• وڏي گنجائش ظرف: Features a 1200ml paint container to minimize refills during large projects.
• وسيع ايپليڪيشن جي حد: Suitable for water-based paints, oil-based paints, varnishes, and enamels on various surfaces including walls, fences, and furniture.

سيٽ اپ ڪريو

Follow these steps to assemble and prepare your paint sprayer for use:

1. پينٽ ڪنٽينر سان ڳنڍيو: Securely screw the 1200ml paint tank onto the spray gun body.
2. Insert the Suction Tube: Ensure the suction tube is correctly oriented. For spraying downwards, position the tube towards the front of the sprayer. For spraying upwards, position the tube towards the rear.
3. نوزل چونڊيو ۽ انسٽال ڪريو: Choose the appropriate nozzle for your paint and project (refer to 'Nozzle Selection' in the Operation section). Insert the selected nozzle into the spray attachment section and secure it with the nozzle cap.
4. بيٽري داخل ڪريو: Slide a charged 20V 4.0Ah battery into the battery slot until it clicks into place.

آپريشن

Proper operation ensures a smooth finish and extends the life of your sprayer.

1. رنگ تيار ڪريو: Dilute your paint to the recommended viscosity using the provided viscometer cup. Fill the viscometer cup with paint and time how long it takes for the paint to drain completely. Refer to the paint manufacturer's guidelines for specific viscosity recommendations.


Figure 2: Using the viscometer cup to check paint viscosity.

2. رنگ جو ڪنٽينر ڀريو: تيار ڪيل رنگ کي 1200ml جي ڪنٽينر ۾ وجھو.
3. اسپري پيٽرن کي ترتيب ڏيو: پنهنجي گهربل اسپري نموني کي چونڊڻ لاءِ ايئر ڪيپ کي گھمايو:
   • عمودي: افقي سطحن لاء.
   • افقي: عمودي سطحن لاء.
   • گردش: For small areas or detailed work.

Figure 3: Adjusting the spray pattern by rotating the air cap.
4. وهڪري جي ڪنٽرول کي ترتيب ڏيو: Use the flow control dial to regulate the paint output. Turn clockwise to increase flow and counter-clockwise to decrease flow.


Figure 4: Flow control dial for adjusting paint output.

5. نوزل جي چونڊ: Choose the nozzle size based on paint type and desired finish:
   • 1.55mm / 1.8mm: Suitable for paints requiring high sprayability, such as water-based paints, topcoats, and recoat paints.
   • 2.2mm / 2.6mm: Suitable for thicker paints such as primers and latex paints.

Figure 5: Nozzle selection guide.
6. اسپري ڪرڻ جي ٽيڪنڪ: Maintain a consistent distance from the surface (approx. 50cm) and move the sprayer in even, overlapping strokes. For upward spraying, ensure the suction tube is oriented towards the rear of the tank to prevent air intake.


Figure 6: Proper technique for spraying upwards, utilizing the backflow prevention system.

سار سنڀال ۽ صفائي

Regular cleaning is crucial for optimal performance and longevity of your paint sprayer.

1. خالي ڪنٽينر: After each use, empty any remaining paint from the container.
2. ڪنٽينر ڌوئڻ: Fill the container with an appropriate cleaning solution (water for water-based paints, mineral spirits for oil-based paints) and spray it through the nozzle until clear.
3. جدا ڪرڻ ۽ صاف ڪرڻ: Disassemble the spray attachment, nozzle, and suction tube. Use the provided cleaning brush and needle to thoroughly clean all components, removing any paint residue. Rinse under running water.
4. صاف فلٽر: Inspect and clean the filters regularly. Replace if damaged.
5. سڪايو ۽ ذخيرو ڪريو: Ensure all parts are completely dry before reassembling and storing the sprayer in a clean, dry place.

Refer to Video 1 in the Setup section for a visual guide on cleaning procedures.

مشڪلاتون

If you encounter issues with your paint sprayer, consider the following common solutions:

• ڪو به اسپري يا ڪمزور اسپري نه: Check paint viscosity, ensure nozzle is clear, verify suction tube is correctly positioned, and confirm battery is charged.
• اڻ برابر اسپري جو نمونو: Adjust the air cap for the desired pattern, ensure the nozzle is clean and not clogged, and check paint consistency.
• Paint Dripping: Ensure all connections are tight, the nozzle is clean, and the paint viscosity is appropriate.
• موٽر نه هلندڙ: بيٽري ڪنيڪشن ۽ چارج ليول چيڪ ڪريو.

For persistent issues, contact NANWEI customer support.

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information, product support, or to purchase replacement parts, please visit the official NANWEI webسائيٽ تي وڃو يا انهن جي ڪسٽمر سروس ڊپارٽمينٽ سان رابطو ڪريو. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.