AdaLov AX3000 Outdoor Wireless Access Point User Manual

1. تعارف

The AdaLov AX3000 Outdoor Wireless Access Point is designed to provide high-speed, stable Wi-Fi 6 connectivity in outdoor environments. Featuring dual-band operation (2.4GHz and 5.8GHz), Power over Ethernet (PoE) support, and an IP67-rated weatherproof enclosure, this device is suitable for extending network coverage to large outdoor areas such as yards, farms, and campسائيٽون.

This manual provides detailed instructions for the installation, operation, and maintenance of your AX3000 Outdoor Wireless Access Point.

وڊيو 1: ختمview of the AdaLov AX3000 Outdoor Wireless Access Point, highlighting its long-range, dual-band Wi-Fi 6 capabilities.

2. پيڪيج مواد

پڪ ڪريو ته هيٺ ڏنل سڀئي شيون توهان جي پيڪيج ۾ شامل آهن. جيڪڏهن ڪا به شيءِ غائب يا خراب آهي، مهرباني ڪري ڪسٽمر سپورٽ سان رابطو ڪريو.

1x Wi-Fi Access Point (APM6-AX3000)
5x External Antennas (3x 5.8GHz, 2x 2.4GHz)
1x نيٽ ورڪ ڪيبل
1x PoE Power Adapter
1x RJ45 Waterproof Head
2x Silicone Pads
2x Stainless Steel Cable Ties
1x اسڪرو ڪٽ
1x رينچ
1x ھدايت وارو دستور

Contents of the AdaLov AX3000 package, including the access point, antennas, cables, and mounting hardware.

Image 1: All components included in the AdaLov AX3000 Outdoor Wireless Access Point package.

3. سيٽ اپ ۽ تنصيب

Follow these steps to set up your AdaLov AX3000 Outdoor Wireless Access Point.

Video 2: Unboxing and setup guide for the Wireless Access Point, demonstrating antenna installation and initial connections.

3.1 اينٽينا لڳائڻ

Identify the 2.4GHz and 5.8GHz antennas. The antennas are labeled at their base.
Carefully screw the 2.4GHz antennas into the ports marked "2.4G" on the access point.
Carefully screw the 5.8GHz antennas into the ports marked "5.8G" on the access point.
Ensure all antennas are securely tightened to prevent signal loss and moisture ingress.

Close-up of the AdaLov AX3000 access point with five high-gain antennas attached, showing the 2.4G and 5.8G labels on the ports.

Image 2: Correct installation of the 2.4GHz and 5.8GHz antennas onto the access point.

3.2 پاور اوور ايٿرنيٽ (PoE) ڪنيڪشن

The AX3000 supports IEEE 802.3af/at PoE and passive 48V PoE, allowing power and data transmission over a single Ethernet cable.

Connect one end of the Ethernet cable to the LAN/WAN port on the access point.
Attach the RJ45 Waterproof Head to the Ethernet cable and the access point's port to ensure weather protection.
Connect the other end of the Ethernet cable to the PoE port on the included PoE Power Adapter or a compatible PoE switch.
Plug the PoE Power Adapter into a power outlet. The access point will power on automatically.

Diagram showing the connection of the AdaLov AX3000 access point to a PoE adapter and an RJ45 waterproof connector.

Image 3: Illustration of the PoE connection process, including the waterproof RJ45 head.

3.3 چڙهڻ جا اختيار

The access point can be mounted on a pole or a wall using the provided accessories.

قطب چڙهڻ: Use the stainless steel cable ties to secure the access point to a pole.
ڀت لڳائڻ: Use the screw kit to attach the access point to a wall.

Comparison image showing the AdaLov AX3000 access point mounted on a pole and on a wall, illustrating flexible deployment options.

تصوير 4: اڳوڻيamples of pole mounting and wall mounting for the access point.

3.4 شروعاتي ترتيب

After physical installation and power-up, access the device's web interface for initial configuration. Refer to the Quick Start Guide for default IP address and login credentials.

4. آپريٽنگ موڊس

The AdaLov AX3000 supports multiple operating modes to suit various network requirements.

Diagram illustrating three operating modes: AP Mode, Repeater Mode, and AP+Repeater Mode, showing how the access point connects to a router and client devices.

تصوير 5: مٿيview of the 3-in-1 working modes supported by the access point.

4.1 AP Mode (Access Point)

In AP mode, the device converts a wired network connection into a wireless one, acting as a central hub for Wi-Fi devices. This is ideal for creating a new wireless network or adding Wi-Fi capabilities to an existing wired network.

Diagram showing the access point in AP Mode, connected via Ethernet to a router/modem and broadcasting Wi-Fi to multiple devices.

Image 6: AP Mode configuration, converting a wired network to wireless.

4.2 ريپيٽر موڊ

In Repeater mode, the device extends the coverage of an existing wireless network. It receives the Wi-Fi signal from your main router and re-broadcasts it, effectively eliminating dead zones and expanding the signal range.

Diagram showing the access point in Repeater Mode, wirelessly extending the signal from a main router to client devices.

Image 7: Repeater Mode configuration, extending existing Wi-Fi coverage.

4.3 AP + Repeater Mode

This mode combines the functionalities of both AP and Repeater modes, allowing for flexible network expansion and dead zone elimination over long distances.

Diagram showing the access point in AP + Repeater Mode, with one unit acting as an AP and another as a repeater to extend coverage further.

Image 8: AP + Repeater Mode configuration for extended range.

5. وضاحتون ۽ خاصيتون

The AdaLov AX3000 Outdoor Wireless Access Point offers advanced features for robust outdoor connectivity.

Ultra-Fast Wi-Fi 6 Speeds: AX3000 dual-band technology with speeds up to 2402Mbps (5GHz) and 573Mbps (2.4GHz).
توسيع ٿيل ڪوريج: 5x 8dBi high-gain omnidirectional antennas and Beamforming technology provide 200–300m long-range coverage.
ڊوائيس جي اعليٰ گنجائش: Supports connectivity for over 200 devices simultaneously.
سڀ موسم جي ڪارڪردگي: IP67-rated waterproof, dustproof, and corrosion-resistant housing. Built-in 15kV ESD and 6kV lightning protection.
Flexible PoE: Supports IEEE 802.3af/at/48V PoE and passive PoE for simplified installation up to 100 meters.
جديد وائرليس ٽيڪنالاجي: Features MU-MIMO, Band Steering, and seamless roaming for optimized network performance.
گيگابٽ ڪنيڪٽوٽي: Dual Gigabit LAN/WAN ports (backward compatible with 10/1000 Mbps).
سيڪيورٽي: Supports WPA/WPA2/WPA3 wireless security protocols.
آپريٽنگ گرمي پد: -10 ° C کان 70 ° C (14 ° F کان 158 ° F).
طول و عرض: 17 x 12.8 x 3.4 انچ.
شيء جو وزن: 4.85 پائونڊ.

Image showing the AdaLov AX3000 access point with visual representations of 5.8GHz (2402 Mbps) and 2.4GHz (574 Mbps) speeds, indicating suitability for HD streaming, gaming, and other applications.

Image 9: Visual representation of the dual-band Wi-Fi 6 speeds.

Four images demonstrating the professional outdoor design of the AdaLov AX3000, highlighting its operating temperature range, 15kV ESD and 6kV lightning protection, IP67 waterproof enclosure, and dust ingress prevention.

Image 10: Features of the professional outdoor design, including weather resistance and protection.

6. سار سنڀال

باقاعده سار سنڀال توهان جي رسائي پوائنٽ جي بهترين ڪارڪردگي ۽ ڊگهي عمر کي يقيني بڻائي ٿي.

صفائي: Periodically wipe the exterior of the device with a soft, damp ڪپڙو. استعمال نه ڪريو سخت ڪيميائي يا گھڻائي صاف ڪندڙ.
ڪيبل جي چڪاس: Regularly check all cable connections, especially the Ethernet cable with the waterproof head, for any signs of wear, damage, or loose connections.
اينٽينا چيڪ: Ensure antennas remain securely tightened and are not obstructed.
فرم ويئر اپڊيٽس: ٺاهيندڙ جي چيڪ ڪريو webفرم ويئر اپڊيٽس لاءِ وقتاً فوقتاً سائيٽ. فرم ويئر کي اپڊيٽ ڪرڻ سان ڪارڪردگي بهتر ٿي سگهي ٿي، نوان فيچر شامل ڪري سگهجن ٿا، ۽ سيڪيورٽي وڌي سگهي ٿي.

7. مسئلا حل ڪرڻ

If you encounter issues with your AdaLov AX3000, refer to the following troubleshooting tips:

طاقت ناهي: Ensure the PoE adapter is correctly plugged into a working power outlet and the Ethernet cable is securely connected to both the adapter and the access point. Check the LED indicators on the PoE adapter.
انٽرنيٽ ڪنيڪشن ناهي: Verify that your main router has an active internet connection. Check the Ethernet cable connection between the access point and your router/PoE switch. Ensure the access point is configured correctly for its operating mode (AP or Repeater).
ڪمزور وائي فائي سگنل يا محدود رينج: Ensure antennas are correctly installed and tightened. Check for physical obstructions between the access point and client devices. Consider repositioning the access point for better line-of-sight. Verify that the access point is operating in the correct mode.
رسائي نه ٿي سگهي Web انٽرفيس: Ensure your computer is connected to the network provided by the access point or your main router. Verify the IP address and login credentials. Try resetting the device to factory defaults (refer to the Quick Start Guide for reset instructions).
ڊوائيس ري سيٽ: To perform a factory reset, locate the reset button on the device (often a small pinhole). With the device powered on, press and hold the reset button for approximately 10 seconds until the indicator lights change, then release. The device will restart with factory default settings.

8. وارنٽي ۽ سپورٽ

Your AdaLov AX3000 Outdoor Wireless Access Point comes with a 12-مهيني وارنٽي خريداري جي تاريخ کان. هي وارنٽي پيداوار جي خرابين کي ڍڪيندي آهي ۽ يقيني بڻائي ٿي ته پيداوار عام استعمال جي تحت بيان ڪيل ڪم ڪري ٿي.

AdaLov also provides حياتياتي ٽيڪنيڪل سپورٽ to assist you with any questions or issues you may encounter during the product's lifespan.

For warranty claims, technical assistance, or any other inquiries, please contact AdaLov customer support through the retailer where you purchased the product or visit the official AdaLov webرابطي جي معلومات لاء سائيٽ.

AdaLov APM6-AX3000