عام 304 اسٽينلیس اسٽيل وال ماؤنٽ ڪچن نل اسپري گن جي هدايت واري دستور سان

تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your Generic 304 Stainless Steel Wall-Mount Kitchen Faucet with Spray Gun. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.

پيداوار ختمview: This faucet features a durable 304 stainless steel construction, a wall-mounted design with double installation holes, a single handle for hot and cold water mixing, and an integrated spray gun for versatile use in kitchens, balconies, or laundry areas.

حفاظت جي ڄاڻ

• ڪنهن به انسٽاليشن يا سار سنڀال شروع ڪرڻ کان اڳ هميشه مکيه پاڻي جي فراهمي کي بند ڪريو.
• مناسب ذاتي حفاظتي سامان پائڻ، جهڙوڪ حفاظتي چشما ۽ ​​دستانو.
• جيڪڏهن توهان کي انسٽاليشن جي عمل جي ڪنهن به حصي بابت پڪ ناهي، ته هڪ قابل پلمبر سان صلاح ڪريو.
• Do not use harsh chemicals or abrasive cleaners on the faucet finish.

پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• 1x Faucet body with swivel spout
• 1x Spray gun with coiled hose
• 2x Wall mounting plates/escutcheons
• Mounting hardware (screws, anchors, gaskets)
• انسٽاليشن جون هدايتون (هي دستورالعمل)

Image: All components included in the faucet package. This includes the main faucet unit, the spray gun with its coiled hose, two circular wall mounting plates, and various small parts like gaskets, screws, and anchors.

سيٽ اپ ۽ تنصيب

This faucet is designed for wall-mounted installation with double holes. Ensure your plumbing is prepared for this configuration.

اوزار گھربل (شامل نه آھي):

• Adjustable رنچ
• اسڪوائر
• Drill (if new holes are needed)
• ماپڻ وارو ٽيپ
• سطح
• Sealant tape (Teflon tape)

تنصيب جا مرحلا:

1. Prepare Water Supply: Turn off the main water supply to the installation area. Drain any remaining water from the pipes.
2. چڙهڻ واري سوراخن کي نشان لڳايو: Measure the distance between your existing hot and cold water outlets. The recommended installation hole distance for this faucet is 13.5-16.5 cm. Mark the positions on the wall where the faucet will be mounted, ensuring they are level.
3. انسٽال ڪريو ماؤنٽنگ بریکٹ: Attach the eccentric connectors (if supplied) to the hot and cold water pipes in the wall, ensuring they are securely tightened and sealed with sealant tape. Adjust them so the distance matches the faucet's inlets and they are level.
4. Attach Faucet Body: Place the decorative escutcheons over the eccentric connectors. Then, attach the main faucet body to the eccentric connectors. Hand-tighten first, then use an adjustable wrench to secure, being careful not to overtighten. Ensure the faucet is level and firmly against the wall.
5. Connect Spray Gun: Connect the coiled hose of the spray gun to the designated outlet on the faucet body. Ensure all connections are tight to prevent leaks.
6. Mount Spray Gun Holder: Choose a convenient location near the faucet to mount the spray gun holder. Mark the drill holes, drill, insert anchors, and secure the holder with screws.
7. ليڪ لاءِ ٽيسٽ: Slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, turn off the water supply, tighten the connections, and re-test.

Image: The faucet installed on a wall, showing the main spout and the handheld spray gun in use. The spray gun is connected via a coiled hose.

Image: The faucet fully installed on a wall, with the spray gun resting in its wall-mounted holder. This view shows the compact and organized appearance of the unit.

آپريٽنگ هدايتون

Your faucet is designed for ease of use with a single handle and a separate spray gun.

Main Faucet Operation:

• پاڻي جو وهڪرو: Lift the single handle to turn on the water flow.
• گرمي پد ڪنٽرول: Move the handle left for hot water and right for cold water. The further you move it, the hotter or colder the water will be.
• Water Shut-off: Push the handle down to turn off the water flow.
• گھمڻ وارو اسپائوٽ: The main spout can swivel to provide flexibility for various sink tasks.

Spray Gun Operation:

• To use the spray gun, ensure the main faucet handle is in the "on" position.
• Press the trigger on the spray gun handle to activate the water spray. Release the trigger to stop the spray.
• The spray gun provides a focused stream for rinsing dishes, cleaning the sink, or other tasks.

سار سنڀال

Regular maintenance will help preserve the finish and functionality of your faucet.

• صفائي: Clean the faucet regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry with a soft cloth to prevent water spots.
• سخت صاف ڪندڙ کان پاسو ڪريو: Do not use abrasive cleaners, scouring pads, ammonia, bleach, or other harsh chemicals, as these can damage the stainless steel finish.
• ايئرٽر جي سار سنڀال: If water flow decreases, the aerator at the end of the main spout may be clogged. Unscrew the aerator, clean any debris, and reattach.
• نلي جي چڪاس: Periodically inspect the spray gun hose for any signs of wear, kinks, or leaks.

مشڪلاتون

جيڪڏهن انهن حلن جي ڪوشش ڪرڻ کان پوءِ به مسئلا برقرار رهن ٿا، مهرباني ڪري ڪسٽمر سپورٽ سان رابطو ڪريو.

وضاحتون

Image: Dimensional diagram of the faucet. Key measurements include a total height of 360mm, a spout reach of 145mm, and a spray gun hose length of 290mm. The installation hole distance is indicated as 13.5-16.5cm.

وارنٽي ڄاڻ

هي پراڊڪٽ هڪ سان گڏ اچي ٿو 3-مهيني وارنٽي from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper installation, misuse, abuse, accident, or unauthorized repairs.

مھرباني ڪري وارنٽي دعوائن لاءِ خريد ڪرڻ جو پنھنجو ثبوت رکو.

ڪسٽمر سپورٽ

If you have any questions, require assistance with installation, or need to report a defect, please contact your retailer or the manufacturer directly. Refer to your purchase documentation for specific contact details.

Manufacturer: RTYBFHSHGH