عام FT0024-US الٽراسونڪ واٽر ليول ميٽر هدايت نامو

1. تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of the Generic FT0024-US Ultrasonic Water Level Meter. This device is designed for accurate measurement of water levels and temperature, offering reliable data for various applications. Please read this manual thoroughly before using the product to ensure correct operation and to prevent damage.

2. حفاظت جي ڄاڻ

Observe the following safety precautions to prevent injury and damage to the device:

• Do not attempt to disassemble or modify the device. Unauthorized modifications can lead to malfunction and void the warranty.
• Ensure the device is installed in a stable location, away from direct sunlight, extreme temperatures, and corrosive environments.
• Keep the device away from strong electromagnetic fields, which may interfere with its operation.
• Handle the sensor unit with care to avoid physical damage.
• ڪنهن به سار سنڀال يا صفائي ڪرڻ کان اڳ بجلي بند ڪريو.

3. پيڪيج مواد

Please check the package contents upon receipt. If any items are missing or damaged, contact your supplier immediately.

• Ultrasonic Water Level Meter Display Unit
• Ultrasonic Sensor Unit with Temperature Sensor
• پاور اڊاپٽر (جيڪڏهن شامل هجي)
• هارڊويئر لڳائڻ (جيڪڏهن شامل هجي)
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

4. پراڊڪٽ ختمview

The FT0024-US system consists of a display unit and an ultrasonic sensor unit. The display unit provides real-time readings of water depth and temperature, while the sensor unit is responsible for detecting the water level using ultrasonic technology.

شڪل 4.1: Generic FT0024-US Ultrasonic Water Level Meter, showing the display unit on the left and the sensor unit with its protective cover open on the right. The display shows depth, indoor temperature, and time, along with a battery indicator.

شڪل 4.2: ٻيو view of the Generic FT0024-US Ultrasonic Water Level Meter, illustrating the compact design of both the display and sensor units. The sensor unit features a green base and a white top with control buttons and a small display.

4.1. Display Unit Features

• Large LCD for clear readings.
• Displays water depth (e.g., in meters).
• Shows indoor temperature (e.g., in Celsius).
• وقت جي نمائش.
• بيٽري جي سطح اشارو.

4.2. Sensor Unit Features

• Ultrasonic transducer for non-contact level measurement.
• Integrated temperature sensor.
• Weather-resistant housing.
• Buttons for configuration and data transmission (e.g., TANK, TIME, SET, MIN/MAX, TX).

5. سيٽ اپ

5.1. Sensor Unit Installation

1. Choose a suitable location for the sensor unit directly above the water surface to be measured. Ensure there are no obstructions between the sensor and the water.
2. Mount the sensor unit securely using appropriate hardware. The sensor should be positioned vertically, pointing downwards towards the water.
3. Ensure the sensor is within the specified range of the display unit for wireless communication.

5.2. Display Unit Placement

1. Place the display unit indoors, in a location where it is easily visible and accessible.
2. Avoid placing the display unit near large metal objects or other electronic devices that might interfere with the wireless signal.
3. Insert batteries into the display unit (if battery-powered) or connect the power adapter.

5.3. شروعاتي هم وقت سازي

1. Power on both the sensor unit and the display unit.
2. The display unit should automatically search for and connect to the sensor unit. This may take a few minutes.
3. Once connected, the display will show the current water depth and temperature readings.

6. آپريٽنگ هدايتون

6.1. Reading Water Level and Temperature

Once synchronized, the display unit will continuously show the current water depth and temperature. The depth is typically displayed in meters (M) and temperature in Celsius (°C).

6.2. وقت ۽ تاريخ مقرر ڪرڻ

Refer to the buttons on the sensor unit (e.g., TIME, SET). Press the SET button to enter time/date setting mode, then use other buttons (e.g., UP/DOWN or +/–) to adjust values. Press SET again to confirm each setting.

6.3. Tank Depth Configuration

To ensure accurate readings, you may need to configure the total depth of your tank or reservoir. Use the TANK button on the sensor unit to access this setting. Follow the on-screen prompts to input the maximum depth. This helps the device calculate percentage full and other related metrics.

6.4. Viewگھٽ ۾ گھٽ / وڌ ۾ وڌ پڙھڻ

Press the MIN/MAX button on the sensor unit to cycle through the minimum and maximum recorded water levels and temperatures. Press again to return to current readings.

6.5. Manual Data Transmission (TX)

If the display unit is not updating, you can manually trigger a data transmission from the sensor unit by pressing the TX button. This forces the sensor to send its current readings to the display.

7. سار سنڀال

7.1. صفائي

• Wipe the display unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Periodically inspect the sensor unit for any dirt, debris, or algae buildup on the ultrasonic transducer. Gently clean with a soft, damp cloth if necessary. Ensure the sensor is dry before re-installation.

7.2. بيٽري مٽائڻ

If the display unit or sensor unit uses batteries, replace them when the low battery indicator appears. Use the specified battery type and ensure correct polarity. Dispose of old batteries responsibly.

7.3. فرمائيندڙ تازه ڪاريون

ٺاهيندڙ جي چيڪ ڪريو website periodically for any available firmware updates. Follow the instructions provided with the update carefully.

8. مسئلا حل ڪرڻ

9. وضاحتون

10. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.