تعارف
This manual provides detailed instructions for the installation, operation, and maintenance of your Generic FT0024-US Ultrasonic Water Level Meter. This device is designed to accurately monitor the liquid level in tanks, displaying depth, indoor temperature, time, and providing low battery and liquid level alarms. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
پيداوار ختمview
The FT0024-US system consists of a display unit and an ultrasonic sensor. The display unit provides real-time data, while the sensor measures the water level and temperature within the tank.
اهم خاصيتون:
- Ultrasonic measurement for accurate water level detection.
- Integrated temperature sensor.
- Time display function.
- Low battery alarm for both display unit and sensor.
- Adjustable liquid level alarms.
- 100-meter range for wireless communication between sensor and display.
شڪل 1: The complete FT0024-US system, showing the main display unit on the left and the ultrasonic sensor unit on the right with its lid open.
Display Unit Components:
- LCD ڊسپلي: Shows depth, indoor temperature, time, and battery status.
- بٽڻ: Typically include 'SET', 'ALARM', 'UP', 'DOWN' for configuration and navigation.
- بيٽري جو خانو: Located on the rear, for power supply.
شڪل 2: هڪ تفصيلي view of the display unit, illustrating the various readings such as water depth (2.50 M), indoor temperature (26.5°C), current time (10:20 PM), and battery level indicators.
سيٽ اپ ڪريو
1. بيٽري لڳائڻ:
- ڊسپلي يونٽ: Open the battery compartment cover on the back of the display unit. Insert the required batteries (e.g., 2 x AA, not included) according to the polarity markings. Close the cover securely.
- سينسر يونٽ: Open the sensor unit's cover. Insert the required batteries (e.g., 6 x AAA, not included) according to the polarity markings. Ensure the O-ring seal is properly seated before closing the cover tightly to maintain water resistance.
2. سينسر لڳائڻ:
- Mount the sensor unit at the top of the tank, ensuring the ultrasonic transducer faces directly down towards the liquid surface.
- Ensure there are no obstructions between the sensor and the liquid surface that could interfere with the ultrasonic signal.
- The sensor should be positioned to avoid direct contact with the liquid and away from any inlets or outlets that might cause turbulence.
3. Initial Power-On and Pairing:
- Once batteries are installed in both units, the display unit should automatically power on and attempt to connect with the sensor.
- Allow a few minutes for the units to establish a wireless connection. A signal strength indicator on the display unit will confirm successful pairing.
- If pairing fails, ensure both units are within the 100-meter wireless range and free from significant interference. You may need to restart both units.
4. بنيادي سيٽنگون:
- وقت جي ترتيب: Press the 'SET' button to enter time setting mode. Use 'UP'/'DOWN' buttons to adjust hours and minutes. Press 'SET' again to confirm.
- يونٽ جي چونڊ: If applicable, use the 'SET' button to cycle through unit options (e.g., meters/feet for depth, Celsius/Fahrenheit for temperature).
آپريٽنگ هدايتون
1. Reading the Display:
- کوٽائي: The large numerical display shows the current liquid depth in the tank.
- اندروني درجه حرارت: Displays the ambient temperature around the display unit.
- وقت: موجوده وقت ڏيکاري ٿو.
- بيٽري جي سطح: Separate icons indicate the battery status for the display unit and the sensor unit.
- پاڻي جي سطح اشارو: A graphical representation of the tank's fill level.
شڪل 3: The display unit illustrating various water level readings. The left display shows a full tank (5.00 M depth), while the right display indicates a low water level (0.50 M depth) with a low level alarm icon activated.
2. الارم لڳائڻ:
- Liquid Level Alarms: Press the 'ALARM' button to enter alarm setting mode. Use 'UP'/'DOWN' buttons to set desired high and low liquid level thresholds. An audible alarm will sound and an icon will flash when the liquid level crosses these thresholds. Press 'ALARM' again to confirm and exit.
- گھٽ بيٽري الارم: This alarm is typically pre-set and activates automatically when battery levels are critically low for either unit.
سار سنڀال
1. صفائي:
- ڊسپلي يونٽ: Wipe with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- سينسر يونٽ: Periodically inspect the ultrasonic transducer for dirt, dust, or mineral buildup. Gently clean with a soft, damp cloth. Ensure the sensor is dry before re-installation.
2. بيٽري مٽائڻ:
- Replace batteries in both the display and sensor units when the low battery indicator appears.
- Always use new batteries of the specified type and ensure correct polarity.
- For the sensor unit, ensure the O-ring seal is clean and properly seated when closing the battery compartment to maintain water resistance.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| No reading on display / Display blank | No power to display unit; Sensor not connected or powered; Out of range. | Check display unit batteries. Check sensor unit batteries. Ensure units are within 100m range. Restart both units. |
| Inaccurate liquid level reading | Sensor obstructed; Sensor not properly aimed; Turbulence in tank. | Ensure sensor has a clear path to liquid. Reposition sensor. Avoid placing sensor near inlets/outlets. |
| Low battery alarm active | Batteries are low in either display or sensor unit. | Replace batteries in the indicated unit (display or sensor). |
| ڪوبه وائرليس ڪنيڪشن ناهي | Units too far apart; Interference; Sensor not powered. | Move display unit closer to sensor. Check for large metal objects or electronics causing interference. Verify sensor batteries. |
وضاحتون
- ماڊل نمبر: FT0024-US (RZZOIVVTT-FT0024-US)
- ASIN: B0FSDDKZTT
- وائرليس رينج: 100 ميٽر تائين (نظر جي لڪير)
- شيء جو وزن: Approximately 1.76 ounces (display unit)
- پيڪيج جي ماپ: تقريبن 0.39 x 0.39 x 0.39 انچ
- ٺاهيندڙ: عام
- افعال: Ultrasonic Water Level Measurement, Temperature Display, Time Display, Low Battery Alarm, Liquid Level Alarms.
وارنٽي ۽ سپورٽ
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
وڌيڪ مدد لاءِ، مھرباني ڪري ٺاھيندڙ جي ويب سائيٽ تي وڃو website or contact their customer service department using the contact details provided with your product packaging.