ORICO 10Gbps Magnetic M.2 NVMe SSD Enclosure with USB-C Dock (Model AP80F) User Manual

پيداوار ختمview

The ORICO AP80F is a versatile 6-in-1 USB-C magnetic docking station that combines an M.2 NVMe SSD enclosure with multiple expansion ports. It features high-speed data transfer, magnetic attachment, and broad compatibility for various devices.

اهم خاصيتون

• 6-۾-1 ڪارڪردگي: Integrates M.2 NVMe SSD enclosure, dual SD/TF card slots, USB-C 10Gbps data port, USB-C 480Mbps headset/mic port, and PD 100W fast charging.
• تيز رفتار ڊيٽا جي منتقلي: Up to 10Gbps for the SSD, enabling fast ProRes 4K video recording and file منتقلي
• مقناطيسي ڳنڍڻ: Built-in magnetic array compatible with MagSafe for secure attachment to iPhones and other devices with magnetic cases/rings.
• ايس ايس ڊي مطابقت: Supports full-size NVMe SSDs (2230/2242/2260/2280) up to 4TB. Note: Only compatible with NVMe protocol, not SATA.
• ڪارڊ پڙهندڙ: Dual SD/TF 3.0 card slots with read speeds up to 104MB/s.
• پاور پهچائڻ: PD 100W pass-through charging.
• آڊيو پورٽ: USB-C 480Mbps audio combo port for microphones or headphones.
• موثر گرمي جي خاتمي: ايلومينيم مصر جasing and thermal pads prevent thermal throttling.

پيڪيج مواد

مھرباني ڪري تصديق ڪريو ته سڀ شيون توھان جي پيڪيج ۾ موجود آھن:

• 1× Magnetic M.2 NVMe 2230/2242/2260/2280 SSD Enclosure
• 1× 0.13m C to C Cable
• 1× Magnetic Ring
• 1× Thermal Silicone Pad
• 1 × اسڪوائر
• 2 × اسڪرو
• 1× يوزر مينوئل

This image displays the package contents, including the SSD enclosure, USB-C cable, magnetic ring, thermal pad, screwdriver, screws, and user manual.

سيٽ اپ ڪريو

SSD تنصيب

1. انڪلوزر کوليو: Unscrew and remove the bottom cover of the enclosure.


This image shows the first step of opening the enclosure by unscrewing and removing the bottom cover.

2. هارڊ ڊرائيو انسٽال ڪريو: Insert your M.2 NVMe SSD at a 30-degree angle into the slot. Tighten the rear screw to secure the drive.


This image illustrates inserting the M.2 NVMe SSD into the enclosure at an angle and securing it with a screw.

3. Install Thermal Pad: Place the thermal silicone pad on top of the hard drive.


This image shows placing the thermal pad over the installed SSD for heat dissipation.

4. مڪمل تنصيب: Close the bottom cover and tighten the screws.


This image demonstrates closing the enclosure and securing it with screws after SSD and thermal pad installation.

Magnetic Ring Attachment (Optional)

For devices without built-in MagSafe compatibility, use the included magnetic ring for secure attachment.

This image shows the magnetic ring that can be attached to non-MagSafe compatible devices for secure mounting of the enclosure.

آپريٽنگ هدايتون

ڊوائيسز سان ڳنڍڻ

Connect the ORICO AP80F to your device using the provided USB-C to USB-C cable. The enclosure is compatible with:

• iPhone 15/16/17 Pro/Max/Plus
• iPad پرو
• ميڪ بڪ
• Android ڊوائيسز
• Windows/Linux computers

This image displays the ORICO AP80F connected to an iPhone, iPad, laptop, and Android phone, demonstrating its wide compatibility.

ڊيٽا جي منتقلي

The enclosure supports USB 3.2 Gen 2 with up to 10Gbps transfer speeds.

This image illustrates the high-speed data transfer capability of the ORICO AP80F, showing a laptop connected to the enclosure and a smartphone.

This video demonstrates the ORICO AP80F's support for full-size NVMe SSDs (2230/2242/2260/2280) up to 4TB, highlighting its storage capacity.

ProRes Recording (iPhone)

For compatible iPhone models (iPhone 15/16/17 Pro/Max/Plus), the enclosure enables direct 4K ProRes recording to the installed SSD, conserving internal phone storage.

This image shows an iPhone recording 4K ProRes video directly to the ORICO AP80F SSD enclosure.

This video demonstrates the ORICO SSD Enclosure's capability for ProRes recording with iPhone 17/16 Pro models.

This video highlights the ProRes recording feature for 2230/2242/2260/2280 B+M M-Key SSDs using the ORICO enclosure.

SD/TF ڪارڊ ريڊر

Insert SD or TF cards into the dedicated slots for quick photo and video import from cameras or other devices. The card reader supports UHS-I compatible formats (SD, SDHC, SDXC, Micro SD) with read speeds up to 104MB/s.

This image shows the SD and TF card slots on the ORICO AP80F, demonstrating its card reading capabilities.

PD 100W فاسٽ چارجنگ

The USB-C PD port supports up to 100W pass-through charging, allowing you to power your device while using the enclosure.

This image illustrates the PD 100W fast charging capability, showing the enclosure connected to a laptop and a power adapter.

Headset/Mic (USB-C) Port

Use the USB-C 480Mbps audio combo port to connect microphones or monitoring headphones.

This image highlights the USB-C headset/mic port on the ORICO AP80F, showing it connected to a microphone.

File انتظام

آئي فون (iOS) لاءِ

1. Connect the enclosure to your iPhone (15/16/17 Series).
2. Select the photos/videos you wish to transfer.
3. Click "Save to Files"
4. Click "Browse".
5. Click "ORICO" (or the name of your SSD).
6. Click "Save".

Note: This feature is not applicable for iPhone 14/13/12/11/XS/XR/X/SE.

This image provides a step-by-step visual guide for transferring files from an iPhone to the ORICO AP80F SSD enclosure.

Android فونز لاءِ

1. انڪلوزر کي پنهنجي اينڊرائيڊ فون سان ڳنڍيو.
2. ڪلڪ ڪريو "Files"
3. Click "Images" (or desired file قسم).
4. Select the photos/videos and click "Copy".
5. Click "ORICO" (or the name of your SSD).
6. Click "V" (Paste).

This image provides a step-by-step visual guide for transferring files from an Android phone to the ORICO AP80F SSD enclosure.

سار سنڀال

گرمي جي خاتمي

The ORICO AP80F features an aluminum alloy casing and includes thermal silicone pads to ensure efficient heat dissipation. This design helps maintain stable performance during prolonged high-load operations and protects data integrity.

This image highlights the multi-heat dissipation features of the enclosure, including the thermal pad and aluminum alloy frame.

عام سنڀال

• ڊوائيس صاف ۽ مٽي کان پاڪ رکو.
• ڊوائيس کي انتهائي گرمي پد يا نمي کي ظاهر ڪرڻ کان بچاء.
• ڊوائيس کي مضبوط اثرن جي تابع نه ڪريو يا نه ڪريو.

مشڪلاتون

عام مسئلا ۽ حل

• ڊوائيس سڃاڻي نه سگهيو:
  • Ensure the USB-C cable is securely connected to both the enclosure and your device.
  • Verify that the M.2 NVMe SSD is correctly installed and secured within the enclosure.
  • Check if your device's operating system requires specific drivers (usually plug-and-play for modern OS).
  • Try connecting to a different USB-C port or another compatible device to rule out port issues.
• سست منتقلي جي رفتار:
  • Ensure your device's USB-C port supports USB 3.2 Gen 2 (10Gbps) for optimal performance. Older USB versions will result in lower speeds.
  • Confirm that the SSD installed is an NVMe drive, not a SATA M.2 drive, as the enclosure is only compatible with NVMe.
  • ٻيون ايپليڪيشنون بند ڪريو جيڪي شايد سسٽم وسيلن يا بينڊوڊٿ کي استعمال ڪري رهيون هجن.
• SSD not detected after installation:
  • Double-check the SSD installation steps, ensuring it's fully seated and secured.
  • For new SSDs, it may need to be initialized and formatted in your computer's Disk Management (Windows) or Disk Utility (macOS) before it appears.
  • Ensure the SSD is an NVMe (M-Key or B+M Key) and not a SATA (B-Key) M.2 SSD.
• Magnetic attachment not strong enough:
  • پڪ ڪريو ته توهان جو فون يا ڪيس MagSafe سان مطابقت رکي ٿو.
  • If using the included magnetic ring, ensure it is properly adhered to your device or case.
  • Thick phone cases may reduce magnetic strength.
• PD charging not working or slow:
  • Verify that your power adapter and USB-C cable support PD 100W.
  • Ensure the cable is connected to the correct PD input port on the enclosure.

وضاحتون

وارنٽي ۽ سپورٽ

وارنٽي ڄاڻ

This ORICO product comes with a 12-مهيني ڪاريگر وارنٽي. مھرباني ڪري وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

ڪسٽمر سپورٽ

For technical assistance, troubleshooting, or warranty inquiries, please contact ORICO customer support through their official webسائيٽ يا پرچون ڪندڙ جتي توهان پراڊڪٽ خريد ڪيو.

وڌيڪ معلومات لاءِ توهان سرڪاري ORICO اسٽور جو دورو ڪري سگهو ٿا: اوريڪو آفيشل اسٽور