CRAFTSMAN Select 24" Two-Stage Snow Blower (Model 31AS6K1EB93) Instruction Manual

1. تعارف

This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your CRAFTSMAN Select 24" Two-Stage Snow Blower, Model 31AS6K1EB93. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The CRAFTSMAN Select 24 is equipped with a 208cc 4-cycle OHV engine and features a 24-inch clearing width and 20-inch intake height. It includes a push-button electric start, self-propelled drive with 6 forward and 2 reverse speeds, and 12-inch sawtooth steel augers for effective snow and ice removal. The 200-degree chute rotation allows for controlled snow discharge up to 40 feet.

Figure 1: CRAFTSMAN Select 24" Two-Stage Snow Blower, Model 31AS6K1EB93. This image shows the complete snow blower from a front-side angle, highlighting its red body, black engine, and large wheels.

2. حفاظت جي ڄاڻ

WARNING: Read and understand all safety warnings and instructions before operating this snow blower. Failure to follow these instructions may result in serious injury or death.

Potential hazards associated with snow blowers include rotating parts, carbon monoxide poisoning from gasoline models, and the need for appropriate personal protective equipment (PPE) such as gloves and eye protection. Always adhere to manufacturer guidelines for handling, operation, and storage.

عام حفاظت جا ضابطا:

• Always wear appropriate eye and hearing protection.
• ھٿ، پير ۽ ڪپڙا ھلندڙ حصن کان پري رکو.
• Never operate the snow blower indoors or in poorly ventilated areas due to carbon monoxide risk.
• Ensure the area to be cleared is free of obstacles before starting.
• ٻارن يا غير تربيت يافته ماڻهن کي مشين هلائڻ جي اجازت نه ڏيو.
• Turn off the engine and disconnect the spark plug wire before performing any maintenance or clearing clogs.
• انجن بند ڪري ۽ ٿڌو ڪري سٺي هوادار علائقي ۾ تيل ڀريو.

3. سيٽ اپ ۽ اسيمبلي

Your snow blower may require some assembly upon arrival. Refer to the separate assembly guide for detailed instructions. Key steps typically include:

1. هينڊ بار اسيمبلي: Attach the upper handlebar to the lower handlebar using the provided hardware. Ensure all cables and wires are routed correctly and not pinched.
2. چُٽ اسيمبلي: Secure the discharge chute and its rotation mechanism. Verify smooth operation of the chute control lever.
3. Skid Shoes Adjustment: Adjust the poly skid shoes to the desired height. For most conditions, set them slightly below the auger housing to prevent scraping the surface.
4. پاڻياٺ جي چڪاس:
   • انجڻ جو تيل: Check the engine oil level and fill with recommended oil (refer to engine manual for type and capacity).
   • ٻارڻ: Fill the fuel tank with fresh, unleaded gasoline. Do not mix oil with gasoline.

Figure 2: Product dimensions of the CRAFTSMAN Select 24" Snow Blower. This image illustrates the overall length (44.75"), width (26.75"), and height (32.8") of the unit, useful for planning storage and transport.

4. آپريٽنگ هدايتون

4.1. آپريشن کان اڳ جي چيڪ لسٽ

• Ensure all nuts, bolts, and screws are tight.
• Check engine oil and fuel levels.
• Inspect the area for debris that could be thrown by the auger.
• Verify that the discharge chute is clear and properly aimed.

4.2. انجڻ شروع ڪرڻ

The CRAFTSMAN Select 24 features a push-button electric start, eliminating the need for manual pull-starting.

1. پاور Connectنيو: Plug an extension cord into the electric start receptacle on the engine.
2. پرائم انجن: Press the primer bulb 3-5 times (more if temperature is below 0°F).
3. چوڪ سيٽ ڪريو: چوڪ ليور کي "مڪمل چوڪ" واري پوزيشن ڏانهن منتقل ڪريو.
4. شروع: Press and hold the electric start button until the engine starts (maximum 5 seconds).
5. بجلي بند ڪريو: Once the engine starts, release the button and unplug the extension cord.
6. چوڪ کي ترتيب ڏيو: Gradually move the choke lever to the "RUN" position as the engine warms up.

Figure 3: Detail of the push-button electric start mechanism. This image shows the electric start receptacle and the red push-button, simplifying engine ignition in cold weather.

Figure 4: Close-up of the fuel cap and primer bulb. This image highlights the components used for fueling and priming the engine before starting.

4.3. سنو بلور کي هلائڻ

The snow blower features a self-propelled drive system with multiple speeds and adjustable chute control.

• مشغول ڊرائيو: Squeeze the drive control lever to engage the self-propelled wheels.
• رفتار چونڊيو: Use the speed selector lever to choose from 6 forward and 2 reverse speeds. Adjust speed based on snow depth and density.
• Engage Auger: Squeeze the auger control lever to activate the augers and impeller.
• Adjust Chute: Use the chute control crank to rotate the discharge chute up to 200 degrees, directing snow away from cleared areas. The durable steel chute can throw snow up to 40 feet.

Figure 5: Detail of the chute control mechanism. This image shows the crank used to adjust the direction of snow discharge, offering up to 200 degrees of rotation.

Figure 6: The 12-inch sawtooth auger actively clearing snow. This image demonstrates the snow blower's capability to cut through and clear heavy snow and ice.

Figure 7: A person operating the CRAFTSMAN Select 24" Snow Blower to clear a driveway. This image shows the snow blower in action, demonstrating its ease of use and effective snow removal.

4.4. انجڻ کي روڪڻ

To stop the engine, release both the drive control lever and the auger control lever. Then, move the engine switch to the "OFF" position.

5. سار سنڀال

Regular maintenance ensures optimal performance and extends the life of your snow blower.

5.1. هر استعمال کان پوءِ

• Clear any snow or ice from the auger housing and discharge chute.
• Wipe down the exterior of the machine.
• لوز فاسٽنرز لاء چيڪ ڪريو.

5.2. Seasonal Maintenance

• انجن آئل جي تبديلي: Change engine oil after the first 5 hours of operation, then every 25 hours or annually.
• اسپارڪ پلگ: Inspect and clean or replace the spark plug annually.
• ٻارڻ جو نظام: At the end of the season, drain the fuel tank or use a fuel stabilizer to prevent fuel degradation. Run the engine until it runs out of fuel if not using a stabilizer.
• لوڻ: Lubricate all moving parts as indicated in the full owner's manual.
• Skid Shoes and Scraper Bar: جيڪڏهن ضروري هجي ته پائڻ لاءِ معائنو ڪريو ۽ تبديل ڪريو.

5.3. اسٽوريج

When storing the snow blower for extended periods:

• مشين کي چڱي طرح صاف ڪريو.
• Perform all seasonal maintenance.
• Store in a dry, protected area, away from direct sunlight and extreme temperatures.
• Ensure the fuel tank is either empty or filled with stabilized fuel.

6. مسئلا حل ڪرڻ

هي حصو عام مسئلن کي حل ڪري ٿو جيڪي توهان کي منهن ڏئي سگهن ٿا. وڌيڪ پيچيده مسئلن لاءِ، هڪ قابل سروس ٽيڪنيشن سان صلاح ڪريو.

7. وضاحتون

8. وارنٽي ۽ سپورٽ

The CRAFTSMAN Select 24" Two-Stage Snow Blower (Model 31AS6K1EB93) comes with a ٽن سالن جي محدود وارنٽي. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official CRAFTSMAN webسائيٽ.

For technical assistance, parts, or warranty claims, please contact CRAFTSMAN customer support. Contact information can typically be found on the CRAFTSMAN webسائيٽ يا پيڪنگنگ مواد ۾.

ٺاهيندڙ: MTD مصنوعات