دستور+

S4A SA-0103

S4A RFID ڌاتو رسائي ڪنٽرول ڪي پيڊ SA-0103 استعمال ڪندڙ دستياب

Electronic Lock System with Keychains and Waterproof Rainproof Cover

1. تعارف

Thank you for choosing the S4A RFID Metal Access Control Keypad (Model SA-0103). This device provides a secure and convenient solution for managing access to your premises. Featuring a robust metal construction, support for RFID keytags/cards, and PIN code entry, it is designed for reliable operation. When installed outdoors, the included rainproof cover offers additional protection against environmental elements. This manual will guide you through the installation, operation, and maintenance of your access control system.

2. وضاحتون

Keypad Specifications
خاصيتوصف
برانڊ جو نالوS4A
ماڊل نمبرSA-0103
ماپ120mm x 56mm x 18mm
ڪم Voltageڊي سي 12V
جامد موجوده≤30mA
پڙهڻ جي حد3cm ~ 8cm
ظرف2000 استعمال ڪندڙ
ماحول جي درجه حرارت-25°C ~ 60°C
ماحولياتي نمي10% ~ 90%
اليڪٽرڪ لاڪ آئوٽ≤3 اي
الارم ٻاھر≤20 اي
Output Short Circuit Protection Time≤100μS
کليل وقت0 ~ 99 seconds (adjustable)

Rainproof Housing Dimensions:

  • Outer size: 150mm x 104mm x 90mm
  • Inner size: 135mm x 89mm x 84mm
Dimensions of the S4A SA-0103 access control keypad, showing a height of 120mm and width of 56mm.
Figure 2.1: Keypad Dimensions
Table of detailed specifications for the Zinc Alloy Standalone access controller, including size, voltage, current, reading range, user capacity, temperature, humidity, and output ratings.
Figure 2.2: Detailed Technical Specifications
Dimensions of the rainproof housing, showing outer dimensions of 150mm height, 104mm width, and 90mm depth, and inner dimensions of 135mm height, 89mm width, and 84mm depth.
Figure 2.3: Rainproof Housing Dimensions

3. پيڪيج مواد

Your S4A RFID Metal Access Control Keypad package typically includes the following items:

  • 1x S4A RFID Metal Access Control Keypad (Model SA-0103)
  • 7x RFID Keytags or Thin Cards (quantity and type may vary based on purchase option)
  • 1x Rainproof Housing (for outdoor installation)
  • چڙهڻ اسڪرو ۽ وال پلگ
  • استعمال ڪندڙ جو دستياب (ھي دستاويز)
Image showing the S4A SA-0103 keypad, seven blue RFID keytags, and a black rainproof housing, indicating a complete kit.
Figure 3.1: Typical Package Contents with RFID Keytags and Rainproof Cover
Image showing the S4A SA-0103 keypad, seven white RFID thin cards, and a black rainproof housing, indicating a complete kit.
Figure 3.2: Typical Package Contents with RFID Thin Cards and Rainproof Cover

4. پراڊڪٽ ختمview

The SA-0103 access control keypad is designed for durability and ease of use. Its metal casing provides enhanced security and longevity. The keypad features backlit buttons for visibility in low-light conditions, and LED indicators to show the system's status. A built-in doorbell function adds convenience.

بند ڪرڻ view of the S4A SA-0103 keypad, highlighting the LED indicator, status LED, program keypad, doorbell button, and screws for fixing.
Figure 4.1: Keypad Features and Components
Video 4.1: S4A Metal Keypad Product Showcase

5. سيٽ اپ ۽ تنصيب

Proper installation is crucial for the optimal performance and security of your access control system. It is recommended that installation be performed by a qualified technician.

5.1. ڪي پيڊ تي چڙهڻ

  1. Choose a suitable mounting location near the door, ensuring it is easily accessible and within reach of necessary wiring.
  2. If installing outdoors, first mount the rainproof housing. The keypad is surface waterproof, but the housing provides additional protection against direct rain and harsh weather.
  3. Use the keypad dimensions (120mm x 56mm) and the rainproof housing dimensions (150mm x 104mm) as a guide for placement.
  4. Mark the drilling points on the wall using the keypad's backplate as a template.
  5. جيڪڏهن ضروري هجي ته سوراخ ڪريو ۽ ڀت تي پلگ لڳايو.
  6. مهيا ڪيل اسڪرو استعمال ڪندي ڪي پيڊ کي ڀت سان محفوظ ڪريو.
S4A SA-0103 keypad installed on an outdoor wall next to a door, demonstrating a typical installation scenario.
شڪل 5.1: مثالample Outdoor Installation of Keypad
S4A SA-0103 keypad installed on a brick wall next to a door, showing another typical outdoor installation.
Figure 5.2: Keypad Installed on a Brick Wall

5.2. وائرنگ ڊاگرام

The keypad requires a DC 12V power supply and connects to an electric lock, an exit button, and optionally a doorbell. Follow the wiring diagrams carefully.

Basic wiring diagram for the S4A SA-0103 access control system, showing connections between a power supply, the SA-0103 keypad, an electric lock, and an exit button.
Figure 5.3: Basic Wiring Diagram
Detailed wiring diagram for the S4A SA-0103 access control system, illustrating connections for power supply, keypad, doorbell, exit button, and various electric lock types (NO/NC).
Figure 5.4: Detailed Wiring Diagram

وائرنگ ڪنيڪشن:

  • +12V ۽ GND: Connect to a stable DC 12V power supply.
  • تالا: Connect to the electric lock. Ensure compatibility with your lock type (Normally Open - NO or Normally Closed - NC).
  • REX/BL: Connect to the exit button.
  • BELL1 and BELL2: Connect to an external doorbell.
  • AUX_IN and AUX_OUT: Auxiliary input/output for advanced functions (refer to specific programming instructions for details).
  • COM، NO، NC: These terminals are for connecting various types of electric locks. COM is common, NO (Normally Open) means the circuit is open when the lock is de-energized, and NC (Normally Closed) means the circuit is closed when the lock is de-energized. Choose the appropriate connection based on your lock's requirements.

Warning: Incorrect wiring can damage the device or connected components. Always ensure power is disconnected before performing any wiring.

6. آپريٽنگ هدايتون

The SA-0103 keypad supports multiple access methods and programming options.

6.1. بنيادي آپريشن

  • Access with RFID: Present a programmed RFID keytag or card to the keypad. The door will unlock for the set open time.
  • Access with PIN: Enter your programmed PIN code followed by the '#' key. The door will unlock for the set open time.
  • دروازي جو ڪم: Press the bell icon button on the keypad to activate the connected doorbell.

6.2. پروگرامنگ موڊ

To enter programming mode, you typically need to enter a master code. The default master code is often 123456 or 999999, but please refer to the specific programming guide that came with your unit for the exact default code and programming steps.

General Programming Steps (may vary slightly):

  1. پروگرامنگ موڊ داخل ڪريو: Enter the Master Code, then press #. The LED indicator will change (e.g., from red to green or flash).
  2. Add User (RFID Card/Keytag):
    1. While in programming mode, enter the command for adding a user (e.g., 1).
    2. Present the new RFID card/keytag ڪي پيڊ ڏانهن.
    3. The keypad will beep to confirm successful addition.
  3. Add User (PIN Code):
    1. While in programming mode, enter the command for adding a user (e.g., 2).
    2. Enter the desired PIN code (4-6 digits), then press #.
    3. Re-enter the PIN code, then press # ٻيهر تصديق ڪرڻ لاء.
    4. The keypad will beep to confirm successful addition.
  4. استعمال ڪندڙ کي حذف ڪريو:
    1. While in programming mode, enter the command for deleting a user (e.g., 3).
    2. To delete by RFID: Present the RFID card/keytag ختم ڪيو وڃي.
    3. To delete by PIN: Enter the PIN code to be deleted, then press #.
    4. The keypad will beep to confirm deletion.
  5. Change Master Code:
    1. While in programming mode, enter the command for changing the master code (e.g., 8).
    2. Enter the new Master Code, then press #.
    3. Re-enter the new Master Code, then press # ٻيهر تصديق ڪرڻ لاء.
  6. Adjust Open Time:
    1. While in programming mode, enter the command for adjusting open time (e.g., 9).
    2. Enter the desired open time in seconds (0-99), then press #.
  7. پروگرامنگ موڊ مان نڪرڻ: دٻايو * or wait for a timeout.

Note: Always refer to the specific programming instructions provided with your device for exact commands and sequences.

7. سار سنڀال

  • صفائي: ڪي پيڊ جي مٿاڇري کي نرم، ڊي سان صاف ڪريوamp ڪپڙو. گھڙڻ وارا صاف ڪندڙ يا محلول استعمال ڪرڻ کان پاسو ڪريو، ڇاڪاڻ ته اهي ختم ۽ اليڪٽرانڪ حصن کي نقصان پهچائي سگهن ٿا.
  • ٻاهرين حفاظت: If installed outdoors, regularly check that the rainproof cover is securely in place and free from cracks or damage. Ensure no water can accumulate around the keypad.
  • وائرنگ جي چڪاس: Periodically inspect all wiring connections to ensure they are secure and free from corrosion or damage.
  • ڪارڪردگي چيڪ: Test the keypad's functionality (RFID, PIN, doorbell, exit button) regularly to ensure it is operating correctly.

8. مسئلا حل ڪرڻ

  • ڪي پيڊ جواب نه ڏئي رهيو آهي: Check the power supply connection. Ensure the DC 12V power adapter is functioning and properly connected to the keypad's +12V and GND terminals.
  • Door does not unlock after valid entry:
    • Verify that the user's RFID card/PIN is correctly programmed.
    • Check the wiring to the electric lock. Ensure it matches the lock type (NO/NC) and is securely connected.
    • Confirm the 'Open Time' setting is not set to 0 or an extremely short duration.
  • RFID card/keytag is not being read: Ensure the card is presented within the 3-8cm reading range. Check if the card is damaged or if it's a compatible type.
  • Doorbell button does not work: Inspect the wiring to the external doorbell (BELL1 and BELL2 terminals). Ensure the doorbell itself is functional.
  • Keypad beeps continuously or shows an error: This may indicate a tamper alarm or a system error. Refer to the specific programming guide for error codes or reset procedures. Disconnecting and reconnecting power can sometimes resolve temporary glitches.
  • Keypad is not backlit: Check power supply and wiring. If the issue persists, there might be an internal fault.

9. استعمال ڪندڙ ٽوٽڪا

  • Secure Your Master Code: Always change the default master code immediately after installation and keep the new code in a secure, memorable location.
  • ٻاهرين حفاظت: For outdoor installations, even though the keypad is surface waterproof, always utilize the provided rainproof cover. This significantly extends the lifespan of the device by protecting it from direct exposure to rain and harsh weather conditions.
  • باقاعده ٽيسٽ: Periodically test all access methods (RFID, PIN) and the exit button to ensure the system is functioning as expected.
  • بيڪ اپ رسائي: Consider having a backup method of entry in case of power failure or system malfunction.

10. وارنٽي ۽ سپورٽ

This S4A RFID Metal Access Control Keypad comes with a 2-year guarantee, ensuring quality and reliability. For technical assistance, troubleshooting beyond this manual, or to inquire about warranty claims, please contact your original vendor or the S4A customer support channel.

لاڳاپيل دستاويز - SA-0103

اڳيview ذهين خودڪار فليٽ دروازي جو نظام: انسٽاليشن ۽ آپريشن گائيڊ
S4A انٽيليجنٽ آٽوميٽڪ فليٽ ڊور سسٽم لاءِ جامع گائيڊ، ٽيڪنيڪل وضاحتن، لوازمات جي وضاحتن، ميڪيڪل ۽ برقي تنصيب جي طريقيڪار، پيرا ميٽر ايڊجسٽمينٽ، ۽ پراڊڪٽ جي معيار جي ضمانت جي تفصيل سان.
اڳيview S4A پراڊڪٽ ڪيٽلاگ: رسائي ڪنٽرول سسٽم ۽ برقي مقناطيسي تالا
جامع S4A پراڊڪٽ ڪيٽلاگ جي ڳولا ڪريو جنهن ۾ رسائي ڪنٽرول سسٽم، برقي مقناطيسي لاڪ، وائرليس دروازن جا لاڪ، فنگر پرنٽ ريڊر، ۽ خودڪار دروازا آپريٽر شامل آهن. مختلف ايپليڪيشنن لاءِ جديد سيڪيورٽي حل ڳوليو.
اڳيview S4A 1CH Tuya WiFi Relay Module: 7-32V Single Channel Smart Switch
Discover the S4A 1CH Tuya WiFi Relay Module, a versatile single-channel switch supporting 7-32V input. This module enables wireless control of electrical devices via WiFi, featuring a 10A output, micro USB or DC input, and compatibility with the Tuya platform for smart home automation.
اڳيview سينڪچوئري ڊائمنڊ سيڪيورٽي سيف انسٽرڪشن مينوئل | SA-DIA1، SA-DIA2، SA-DIA3 ماڊلز
سينڪچوئري ڊائمنڊ سيڪيورٽي سيف لاءِ جامع هدايت نامو، جنهن ۾ ماڊل SA-DIA1، SA-DIA2، SA-DIA3، SA-DIA1-D، SA-DIA2-D، ۽ SA-DIA3-D شامل آهن. سيٽ اپ، اليڪٽرانڪ لاڪ پروگرامنگ، آپريشن، سيڪيورٽي خاصيتون، ۽ لائف ٽائيم وارنٽي شامل آهن.
اڳيview Illustra Pro Gen3 سيريز: انسٽاليشن ۽ ڪنفيگريشن گائيڊ
هي گائيڊ Illustra Pro Gen3 سيريز سيڪيورٽي ڪيمرائن جي انسٽاليشن ۽ ترتيب لاءِ جامع هدايتون مهيا ڪري ٿو، جنهن ۾ سيٽ اپ، نيٽ ورڪ ڪنيڪٽيويٽي، سيڪيورٽي خاصيتون، ۽ جديد آپريشنل سيٽنگون شامل آهن.
اڳيview Sanctuary Onyx Security Safe Instruction Manual
Instruction manual for the Sanctuary Onyx series of security safes, including models SA-ONYX1, SA-ONYX2, and SA-ONYX3. Covers setup, operation, security features, and warranty information.