ايزي ٿريڊ ڪي 7 ميني ڊيسڪ ٽاپ 3D پرنٽر هدايت نامو

1. تعارف

The EasyThreed K7 is a compact and user-friendly mini 3D printer designed for educational use and DIY enthusiasts. It features a 100x100x100mm print size, one-key printing, and a non-heated build plate for enhanced safety, making it suitable for children and beginners. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your EasyThreed K7 3D printer.

Figure 1: EasyThreed K7 Mini Desktop 3D Printer with example prints.

2. حفاظت جي ڄاڻ

Please read all safety instructions carefully before operating the printer to prevent injury or damage to the device.

• گرم سطحون: The extruder nozzle can reach high temperatures. Avoid touching the nozzle during operation or immediately after printing.
• حرڪت وارا حصا: آپريشن دوران هٿن، وارن ۽ ڍيلن ڪپڙن کي حرڪت ڪندڙ حصن کان پري رکو.
• وينٽيليشن: Operate the printer in a well-ventilated area.
• بجلي جي فراهمي: Use only the provided power adapter. Ensure the power supply is stable and matches the printer's requirements.
• ٻارن جي حفاظت: The EasyThreed K7 features a non-heated bed, which enhances safety, especially for younger users. However, adult supervision is always recommended when children are operating the printer.
• تارن جي سنڀال: Store filament in a dry place to prevent moisture absorption, which can affect print quality.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون توهان جي پيڪيج ۾ موجود آهن:

• 1 x EasyThreed K7 3D Printer Kit
• 1 x Filament Holder
• 1 x TF Card (4G+)
• 1 x ڪارڊ ريڊر
• 1 x 5m PLA Filament (Random Color)
• 1 x سکرو ڊرائيور
• 4 x اسڪرو
• 1 x پاور ڪور
• 1 x USB ڪيبل
• 1 x User's Manual (Inside TF Card)

Figure 2: Package contents including TF card, USB cable, filament holder, power supply, screwdriver, screws, and PLA filament.

4. سيٽ اپ گائيڊ

Follow these steps to set up your EasyThreed K7 3D printer:

1. Assemble the X.Z Axis: Install the X.Z axis assembly onto the base of the printer. Secure it with the four provided screws.
2. فليمينٽ هولڊر انسٽال ڪريو: Attach the filament holder to the designated slot on the printer.

Figure 3: Visual guide for installing the X.Z axis and filament holder.

3. پاور Connectنيو: پاور اڊاپٽر کي پرنٽر جي پاور پورٽ ۾ ۽ پوءِ وال آئوٽليٽ ۾ لڳايو.
4. لوڊ فليمينٽ: Place the PLA filament spool onto the filament holder. Gently feed the end of the filament into the extruder's intake hole until it is gripped by the extruder motor.
5. TF ڪارڊ داخل ڪريو: Insert the provided TF card into the card slot on the printer.

For a visual guide on the assembly and initial setup, please watch the official setup video:

5. آپريٽنگ هدايتون

The EasyThreed K7 is designed for simple, one-key operation.

5.1 Preparing Your 3D Model

1. سافٽ ويئر: Use compatible slicing software such as Easyware K7, CURA, or Simplify3D to prepare your 3D models.
2. File فارميٽ: Your 3D model files should be in STL/OBJ format. The slicing software will convert these into GCODE files, which the printer understands.
3. ٽڪرائڻ: Load your STL/OBJ file into the slicer software. Adjust print settings (e.g., layer height, infill, print speed) as desired. Save the generated GCODE file TF ڪارڊ ڏانهن.

5.2 Printing Your Model

1. پاور آن: Ensure the printer is connected to power and the TF card with your GCODE file داخل ڪيو ويو آهي.
2. One-Key Printing: The EasyThreed K7 features a simple one-key printing function. Press the designated print button (refer to the printer's control panel for exact location) to start printing the model from the TF card.
3. نگراني: Monitor the initial layers of your print to ensure proper adhesion to the build plate.
4. مڪمل ٿيڻ: Once printing is complete, the printer will stop. Carefully remove the printed model from the detachable build platform.

Figure 4: Preparing a 3D model using slicing software on a computer.

6. سار سنڀال

باقاعده سار سنڀال توهان جي 3D پرنٽر جي بهترين ڪارڪردگي ۽ ڊگهي عمر کي يقيني بڻائي ٿي.

• نوزل صاف ڪريو: Periodically clean any filament residue from the nozzle using a small brush or a needle (when the nozzle is slightly warm, but not hot).
• بلڊ پليٽ صاف ڪريو: After each print, clean the build plate to remove any adhesive residue or small plastic pieces. A clean surface is crucial for good print adhesion.
• لوز اسڪرو لاءِ چيڪ ڪريو: Regularly inspect the printer for any loose screws or connections and tighten them if necessary.
• لچڪدار حرڪت وارا حصا: Occasionally, apply a small amount of lubricant to the smooth rods and lead screws to ensure smooth movement of the print head and build plate.
• تنتن جو ذخيرو: Store unused filament in a sealed bag with desiccant to prevent moisture absorption.

7. مسئلا حل ڪرڻ

هتي ڪجھ عام مسئلا ۽ انهن جا امڪاني حل آهن:

• پرنٽ جيڪو بلڊ پليٽ سان نه چپڪي:
  • Ensure the build plate is clean and free of dust or grease.
  • Verify that the first layer height and bed leveling are correctly set in your slicing software.
• تار نه نڪرندڙ:
  • Check if the filament is properly loaded and not tangled.
  • Ensure the nozzle is not clogged. You may need to perform a cold pull or use a cleaning needle.
  • Verify the extruder temperature is set correctly for your PLA filament (180-230℃).
• Poor Print Quality (e.g., stringing, layer shifting):
  • اسٽرنگ کي گهٽائڻ لاءِ پنهنجي سلائيسر سافٽ ويئر ۾ ريٽريشن سيٽنگون ترتيب ڏيو.
  • Check belt tension and ensure all moving parts are secure to prevent layer shifting.
  • Ensure the printer is on a stable surface to minimize vibrations.
• پرنٽر جواب نه ڏئي رهيو آهي:
  • سڀ پاور ڪنيڪشن چيڪ ڪريو.
  • Ensure the TF card is inserted correctly and contains valid GCODE files.
  • پرنٽر ٻيهر شروع ڪريو.

8. وضاحتون

Figure 5: Detailed specifications of the EasyThreed K7 3D Printer.

Figure 6: Physical dimensions of the EasyThreed K7 printer.

9. استعمال ڪندڙ ٽوٽڪا

مهيا ڪيل ري ۾ ڪو به مخصوص استعمال ڪندڙ صلاحون نه مليون.views or Q&A content. However, users often find success by ensuring proper bed leveling and using recommended print settings for their chosen filament. Experimenting with different slicing software settings can also help optimize print quality for various models.

10. وارنٽي ۽ سپورٽ

The EasyThreed K7 Mini Desktop 3D Printer comes with a 12-month manufacturer's limited warranty for defective items. Accessories included with the printer are covered by a 3-month warranty. This warranty does not cover items damaged due to misuse or after the warranty period has expired.

For technical support, warranty claims, or any questions regarding your printer, please contact the seller or manufacturer directly. Ensure you have your order number and a detailed description of the issue ready when seeking support.