1. تعارف
This manual provides detailed instructions for the setup, operation, and maintenance of your simair 1.51 Inch OLED Panel 128x56 Transparent Display Module (Model: SER1.51-E). This module is designed for integration into various electronic projects, particularly those involving Arduino platforms, offering a unique transparent display experience with high contrast and wide viewing angles.
2. پراڊڪٽ ختمview
2.1 اهم خاصيتون
- Transparent OLED Technology: Offers a high-end, sci-fi aesthetic, suitable for advanced household products and innovative projects.
- Self-Luminous Display: No backlight required, providing excellent visual angles and display effects.
- Arduino Compatibility: Features an internal level conversion circuit, making it directly compatible with Arduino 5V systems without the need for additional level shifters.
- I2C انٽرفيس: Simplifies connection to microcontrollers, requiring only two I/O pins (SDA, SCL).
- سافٽ ويئر سپورٽ: Compatible with the u8glib library and existing 0.96 inch OLED programs.
- ڪمپيڪٽ ڊيزائن: Light, thin, and low power consumption.
- مضبوط ڪارڪردگي: Ultra-wide operating temperature range, high brightness, fast response, and wide viewزاويه.
2.2 اجزاء
پراڊڪٽ پيڪيج ۾ عام طور تي شامل آهن:
- 1x simair 1.51 Inch OLED Panel Module (SER1.51-E)
- 1x PH2.0 4PIN connection cable
3. وضاحتون
| پيرا ميٽر | قدر |
|---|---|
| ماڊل | SER1.51-E |
| Panel Size (WxHxT) | 42.04 x 27.22 x 1.25 ملي ميٽر |
| View Area (WxH) | 35.05 x 15.32 ملي ميٽر |
| Overall Module Dimensions (WxH) | تقريبن 42 x 52 ملي ميٽر |
| پٺاڻ | No backlight required, self-luminous |
| رنگ ڏيکاريو | نيرو |
| آپريٽنگ جلدtage | 3.3V |
| ڊرائيور IC | SSD1306 (Note: Some variants may use SSD1309) |
| خالص وزن | 20 جي |
| ڊرائيونگ جو طريقو | 1/56 DUTY |
| قرارداد | 128x56 Dot Matrix |
| ڊسپلي موڊ | 10000:1 |
| قسم | PMOLED |
| ساخت | COG |
| انٽرفيس | I2C |
| ڊٽ پيچ | 0.274 x 0.274 ملي ميٽر |
| ڊٽ سائيز | 0.254 x 0.254 ملي ميٽر |
| ڪنيڪشن | PH2.0 4PIN |
| View زاويه | پورو View |
| آپريٽنگ جي درجه حرارت | -20 ℃ ~ +70 ℃ |
| اسٽوريج جي درجه حرارت | -30 ℃ ~ +80 ℃ |
| درخواست | High-end smart home, DIY electronics, embedded systems |
4. سيٽ اپ جون هدايتون
Follow these steps to connect and prepare your OLED display module for use with an Arduino or compatible microcontroller.
4.1 Pinout and Connections
The module uses a PH2.0 4PIN connector for I2C communication. The pin assignments are as follows:
- VCC: بجلي جي فراهمي (3.3V)
- جي ڊي: زمين
- ايس سي ايل: I2C گھڙي لائن
- SDA: I2C ڊيٽا لائن
4.2 Wiring to Arduino
Connect the OLED module to your Arduino board as follows:
- OLED VCC جي طرف Arduino 3.3V
- OLED GND جي طرف Arduino GND
- OLED SCL جي طرف آرڊينو A5 (for Arduino Uno/Nano) or corresponding SCL pin
- OLED SDA جي طرف آرڊينو A4 (for Arduino Uno/Nano) or corresponding SDA pin
Note: The module has an internal level conversion circuit, allowing direct connection to 5V Arduino systems without external level shifters. However, powering the module directly from 3.3V is recommended if available.
4.3 سافٽ ويئر سيٽ اپ (Arduino IDE)
- لائبريريون انسٽال ڪريو: Open your Arduino IDE. Go to `Sketch > Include Library > Manage Libraries...`. ڳولھيو and install the `Adafruit SSD1306` and `Adafruit GFX Library`. Alternatively, you can use the `u8glib` library, which is also compatible.
- بورڊ ۽ پورٽ چونڊيو: Go to `Tools > Board` and select your Arduino board (e.g., Arduino Uno). Then go to `Tools > Port` and select the correct serial port for your board.
- Exampلي ڪوڊ: You can use example sketches provided by the installed libraries. For Adafruit SSD1306, navigate to `File > مثالamples > Adafruit SSD1306 > ssd1306_128x64_i2c`. You may need to modify the resolution to 128x56 and the I2C address if it differs from the default (0x3C or 0x3D). The module's back often indicates the I2C address (e.g., 0x78 or 0x7A).
- اسڪيچ اپلوڊ ڪريو: Compile and upload the sketch to your Arduino board.
5. آپريٽنگ هدايتون
Once the module is correctly wired and the appropriate code is uploaded to your microcontroller, the OLED display will begin to function according to your programming. As a self-luminous display, it will show clear, high-contrast visuals without the need for external backlighting.
- ڏيکاريو مواد: The content displayed on the screen is entirely controlled by the code running on your microcontroller.
- پاور آن / آف: The display powers on and off with the microcontroller.
- روشني: OLED displays typically offer high brightness and contrast. Brightness can often be adjusted through software commands to the SSD1306/SSD1309 controller.
6. سار سنڀال
The simair OLED display module is a robust electronic component, but proper care can extend its lifespan and ensure optimal performance.
- سنڀالڻ: Handle the module by its edges to avoid touching the display area or delicate flex cable.
- صفائي: If necessary, gently wipe the display surface with a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
- اسٽوريج: ماڊيول کي سڪل، اينٽي اسٽيٽڪ ماحول ۾ ذخيرو ڪريو، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري.
- طاقت: بجلي جي فراهمي کي يقيني بڻائيtage does not exceed 3.3V to prevent damage to the module.
7. مسئلا حل ڪرڻ
If you encounter issues with your OLED display module, consider the following troubleshooting steps:
- ڊسپلي روشني نه ڪرڻ:
- Check all wiring connections (VCC, GND, SCL, SDA) for proper seating and continuity.
- Verify that the module is receiving the correct 3.3V power supply.
- Ensure your microcontroller is powered on and running the correct code.
- Incorrect or Garbled Display:
- Confirm the I2C address in your code matches the module's address (commonly 0x3C or 0x3D, sometimes 0x78 or 0x7A). The address is often printed on the back of the module.
- Check that the display resolution in your code is set to 128x56.
- Ensure the correct display driver (SSD1306 or SSD1309) is selected in your library initialization.
- Re-upload your code to the microcontroller.
- No Communication (I2C Scan Fails):
- Double-check SCL and SDA connections.
- Ensure pull-up resistors are correctly configured for I2C (many Arduino boards have internal pull-ups, but external 4.7kΩ resistors may be needed in some setups).
- Try running an I2C scanner sketch to detect if the module is recognized on the bus.
8. استعمال ڪندڙ ٽوٽڪا
Here are some tips to enhance your experience with the simair OLED display module:
- Experiment with Libraries: While Adafruit's libraries are popular, explore other compatible libraries like u8glib for different features or optimizations.
- I2C ائڊريس: Always confirm the I2C address printed on the back of your specific module, as it can sometimes vary between batches.
- طاقت جا خيال: Although compatible with 5V Arduino systems, providing a stable 3.3V power source directly to the module's VCC pin can sometimes lead to more reliable operation.
- حسب ضرورت: If you have specific project requirements, inquire about customization options for the display module.
9. وارنٽي ۽ سپورٽ
The simair 1.51 Inch OLED Panel 128x56 Transparent Display Module comes with a 1-year product warranty. We also provide lifetime technical support to assist you with any questions or issues you may encounter during the use of this product.
- ٽيڪنيڪل مدد: For technical inquiries, programming assistance, or troubleshooting beyond this manual, please contact simair customer support.
- دستاويز: Drawings and related procedures can be provided upon request to aid in your project development.
- Customization Services: Customization of the product is available for specific project needs, subject to minimum order quantity requirements.
