PlusAcc E01 Rechargeable Battery Base for Amazon Echo Dot 3rd Generation

تعارف

The PlusAcc E01 Rechargeable Battery Base is specifically designed to enhance the portability of your Amazon Echo Dot 3rd Generation. This accessory allows you to free your Echo Dot from power outlets, enabling you to enjoy your smart speaker anywhere, anytime, without being tethered to a wall. Its seamless design ensures your Echo Dot is securely held and protected, while maintaining optimal sound quality.

Video: Demonstrating the portability and easy setup of the PlusAcc E01 Battery Base with an Echo Dot 3rd Generation.

حفاظت جي ڄاڻ

To ensure safe operation and prolong the life of your battery base, please observe the following safety guidelines:

• اصل اڊاپٽر استعمال ڪريو: Always use the original Amazon Echo Dot 3rd Generation power adapter to charge the PlusAcc E01 Battery Base. Using unauthorized adapters may cause damage or safety hazards.
• حفاظتي خاصيتون: The battery base is equipped with multiple safety protections, including:
  • اوور گرمي تحفظ
  • Over Surge Protection
  • اوور چارج تحفظ
  • شارٽ سرڪٽ جي حفاظت
• آپريٽنگ گرمي پد: Operate the device within the recommended temperature range of 0℃ to 40℃.
• پاڻي کان بچاء: ڊوائيس کي پاڻي يا گهڻي نمي جي سامهون نه رکو.
• ڌار ڪرڻ کان پاسو ڪريو: پاڻ ڊوائيس کي ڌار ڪرڻ يا مرمت ڪرڻ جي ڪوشش نه ڪريو. جيڪڏهن مسئلا پيدا ٿين ٿا ته ڪسٽمر سپورٽ سان رابطو ڪريو.

پيڪيج مواد

مھرباني ڪري وصولي تي پيڪيج جي مواد کي چيڪ ڪريو. جيڪڏھن ڪا به شيءِ غائب يا خراب آھي، پنھنجي پرچون ڪندڙ سان رابطو ڪريو.

• 1 x PlusAcc E01 Rechargeable Battery Base
• 1 x E01 Setup Guide (User Manual)

Note: The power adapter and Amazon Echo Dot 3rd Generation are NOT included and must be purchased separately or used from your existing Echo Dot setup.

وضاحتون

سيٽ اپ جون هدايتون

Follow these steps to set up your PlusAcc E01 Battery Base with your Amazon Echo Dot 3rd Generation:

1. Prepare the Devices: Ensure both your Echo Dot 3rd Generation and the PlusAcc E01 Battery Base are powered off.
2. ايڪو ڊاٽ رکو: Gently place your Echo Dot 3rd Generation onto the battery base, aligning it with the internal supports.
3. پاور Connectنيو: Locate the short DC power cable integrated into the battery base. Plug this cable into the DC input port on the back of your Echo Dot 3rd Generation.
4. محفوظ ڊوائيس: Ensure the Echo Dot is securely seated within the battery base and the cable is firmly connected.
5. پاور آن: Press and hold the power button on the front of the battery base for approximately 2 seconds until the LED indicators light up. Your Echo Dot should now power on and be ready for use.

آپريٽنگ هدايتون

Once your Echo Dot 3rd Generation is securely installed on the PlusAcc E01 Battery Base, operating it is straightforward:

• پاور آن / آف: Press and hold the power button on the front of the battery base for approximately 2 seconds to turn the device on or off.
• پورٽيبلٽي: The battery base makes your Echo Dot portable. Simply pick it up and move it to any location within your home or outdoors where you have Wi-Fi coverage.
• آواز جي معيار: The open design of the battery base ensures there is no blockage or interference with the Echo Dot's sound quality.

Charging and Battery Status

The PlusAcc E01 Battery Base features LED indicators to show its battery level and charging status.

بيٽري سطح اشارو:

Discharge Status: When not plugged into a DC adapter, the LEDs will be steadily lit to indicate the current battery level.

چارج ڏيڻ جي حالت: When plugged into a DC adapter for charging, the LEDs will slow flash to indicate charging progress. Once fully charged, all LEDs will remain steadily lit.

سار سنڀال

• صفائي: Use a soft, dry cloth to clean the surface of the battery base. Do not use abrasive cleaners or solvents.
• اسٽوريج: ڊوائيس کي سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري ٿڌي، سڪل جاءِ تي رکو.
• بيٽري جي سنڀال: For optimal battery life, avoid fully discharging the battery frequently. Charge it regularly, even if not in constant use.

مشڪلاتون

• ڊوائيس تي طاقت نه آهي:
  • Ensure the battery base is charged. Check the LED indicators.
  • Verify that the Echo Dot's power cable is securely connected to the battery base.
  • Press and hold the power button on the battery base for 2 seconds to ensure it's turned on.
• Battery base not charging:
  • Confirm you are using the original Amazon Echo Dot 3rd Generation power adapter.
  • Check if the power adapter is properly plugged into a working wall outlet and the battery base.
  • The LED indicators should slow flash when charging. If not, try a different outlet or adapter.
• Echo Dot not fitting securely:
  • Ensure you have an Amazon Echo Dot 3rd Generation. This base is not compatible with other generations.
  • Carefully align the Echo Dot with the base's contours before pressing down.

استعمال ڪندڙن جون صلاحون

• پلگ ۽ راند جي سهولت: The design allows for quick and easy attachment of your Echo Dot, making it ready for portable use in seconds.
• Uninterrupted Sound: The open design of the battery base is engineered to prevent any obstruction or degradation of your Echo Dot's audio output.
• ڊوائيس تحفظ: The base provides a stable and protective housing for your Echo Dot, helping to prevent scratches and accidental sliding.
• وڌايل راند جو وقت: Choose between the 5000mAh model for up to 9 hours of playtime or the 10000mAh model for up to 16 hours, depending on your usage needs.

وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the contact details provided by your retailer or visit the official PlusAcc webسائيٽ. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.