JOYO JE-53

JOYO JE-53 Acoustic Guitar Equalizer and Tuner

Model: JE-53

تعارف

The JOYO JE-53 is a versatile 2-in-1 unit designed for acoustic guitars, combining an equalizer and a chromatic tuner. This compact preamp system allows for precise control over your guitar's tone and features a built-in tuner for on-the-fly adjustments. It is suitable for folk, classical, and acoustic guitars, providing enhanced sound and convenience for musicians.

پيڪيج مواد

  • 1 x JOYO JE-53 Equalizer/Tuner Unit
  • 1 x Piezo Pickup
  • Installation Accessories (screws, cable ties, etc.)

وضاحتون

خاصيتتفصيل
ماڊلJE-53
قسمPickup, Equalizer, Tuner
موادABS پلاسٽڪ، ڌاتو
ان پٽ رزسٽر10MΩ
A4 فريڪوئنسي440Hz
ترتيب ڏيڻ جي حد0A-8C
رواداري+/-1 سينٽ
Item Size (approx.)8.3 x 5.5 x 6.2 سينٽي
شيءِ جو وزن (بيٽري کان سواءِ)64 جي
بجلي جي فراهمي9V Battery (not included)

سيٽ اپ ۽ تنصيب

The JOYO JE-53 is designed for integration into acoustic guitars. Installation typically involves modifying the guitar body to house the preamp unit and installing the piezo pickup under the saddle. Due to the nature of guitar modification, professional installation is highly recommended to ensure proper fit, wiring, and to avoid damage to your instrument.

1. ا Preamp Unit Placement and Cutout

The JE-53 unit requires a specific cutout in the side of your guitar. Refer to the dimension diagram below for precise measurements. Ensure the chosen location does not interfere with the guitar's internal bracing or structural integrity.

Dimensional diagram for JOYO JE-53 installation, showing faceplate dimensions of 75mm x 55mm and cutout dimensions of 65mm x 48mm.
Figure 1: JOYO JE-53 Dimensional Diagram for Installation

The diagram indicates a faceplate size of approximately 75mm x 55mm, with a recommended cutout size of 65mm x 48mm for the main body of the unit.

2. Pickup Installation

The included piezo pickup should be installed under the saddle of your guitar's bridge. This requires careful routing of the pickup wire through the bridge and into the guitar body to connect to the preamp unit. Ensure the pickup is seated evenly for optimal sound transmission.

3. وائرنگ ڪنيڪشن

Connect the piezo pickup to the designated input on the JE-53 preamp. The output jack, which is typically integrated with the endpin, will also need to be wired to the preamp. Use the provided installation accessories to secure all wiring neatly within the guitar body.

4. بيٽري لڳائڻ

The JE-53 is powered by a 9V battery (not included). The unit features a convenient flip-open battery compartment on its surface. To install the battery:

  1. Locate the battery compartment cover on the front of the JE-53 unit.
  2. Gently press the latch and flip open the cover.
  3. Insert a fresh 9V battery, ensuring correct polarity (+/-).
  4. Close the battery compartment cover until it latches securely.
سامهون view of the JOYO JE-53 unit, showing the flip-open battery compartment.
شڪل 2: بيٽري ڪمپارٽمينٽ جي جڳھ

آپريٽنگ هدايتون

Once installed and powered, the JOYO JE-53 offers intuitive controls for your acoustic guitar's sound and tuning.

ويجهو سامهون وارو نظارو view of the JOYO JE-53 controls, showing Power button, Low Batt indicator, Volume knob, Tone knob, and Tuner display.
Figure 3: JOYO JE-53 Control Panel

1. پاور آن/آف

  • کي دٻايو پاور يونٽ کي آن يا آف ڪرڻ لاءِ بٽڻ.
  • The tuner display will illuminate when the unit is powered on.

2. حجم ڪنٽرول

  • گھمايو وول. knob to adjust the overall output volume of your guitar.
  • Turn clockwise to increase volume, counter-clockwise to decrease.

3. ٽون ڪنٽرول

  • گھمايو ٽون knob to adjust the tonal characteristics of your guitar's sound.
  • Turning towards '+12' will brighten the sound, while turning towards '-12' will make it warmer or darker.

4. ٽيونر فنڪشن

  • When the unit is powered on, the built-in tuner is active.
  • Pluck a single string on your guitar. The display will show the note being played and indicate whether it is sharp, flat, or in tune.
  • Adjust your guitar's tuning pegs until the display indicates the string is in tune.

5. گھٽ بيٽري جو اشارو

  • جي گھٽ بٽ. LED will illuminate when the 9V battery power is running low.
  • When this indicator lights up, it is recommended to replace the battery soon to ensure optimal performance and accurate tuning.

سار سنڀال

بيٽري مٽائڻ

When the 'LOW BATT.' indicator lights up, replace the 9V battery promptly. Follow the battery installation steps outlined in the 'Setup and Installation' section.

صفائي

Wipe the surface of the JE-53 unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or electronic components.

مشڪلاتون

  • ڪوبه آواز آئوٽ:
    • چيڪ ڪريو ته يونٽ آن آهي يا نه.
    • Ensure the 9V battery is fresh and correctly installed.
    • Verify all internal wiring connections, especially from the pickup to the preamp and to the output jack.
    • Check the guitar cable and ampلفٽ ڪنيڪشن.
  • Tuner Not Responding/Inaccurate:
    • پڪ ڪريو ته يونٽ تي طاقت آهي.
    • Replace the 9V battery if the 'LOW BATT.' indicator is on or if the battery is old.
    • Make sure you are plucking single strings clearly.
  • بگڙيل يا ڪمزور آواز:
    • Check the battery level; a low battery can cause distortion.
    • Adjust the Volume and Tone knobs.
    • Inspect the piezo pickup's placement under the saddle to ensure it's making good contact.

استعمال ڪندڙن جون صلاحون

  • For optimal performance and consistent sound quality, always use a fresh, high-quality 9V alkaline battery.
  • When not using your guitar for extended periods, it's good practice to remove the 9V battery from the JE-53 unit to prevent potential battery leakage and damage to the electronics.
  • If you are not experienced with guitar modifications, consider having the JE-53 professionally installed by a qualified luthier or guitar technician to ensure proper fit, wiring, and optimal sound.
  • Experiment with the TONE knob to find the perfect balance for your playing style and the acoustic environment.

وارنٽي ۽ سپورٽ

This product is covered by a limited warranty against manufacturing defects. Please retain your proof of purchase.

  • Defective or Faulty Products: If you receive a defective or faulty product, please contact the seller within 48 hours of delivery. Provide clear photos or videos demonstrating the issue. Upon confirmation, a replacement or refund may be offered.
  • Wrongly-Shipped Items: In the event of receiving an incorrect item, please contact the seller within 48 hours of delivery. The seller will arrange for the correct item to be delivered or process a full refund.

For any technical assistance or warranty claims, please contact the seller directly through your purchase platform.

لاڳاپيل دستاويز - JE-53

اڳيview JOYO PREAMP HOUSE Guitar Preamp پيڊل استعمال ڪندڙ دستياب
Comprehensive user manual for the JOYO PREAMP HOUSE guitar preamp pedal, detailing features, operation, connections, specifications, and safety instructions.
اڳيview JOYO R-30 Tidal Wave Bass Preamp: User Guide and Specifications
Comprehensive guide to the JOYO R-30 Tidal Wave Bass Preamp, covering its specifications, features, controls, and usage for bass guitarists.
اڳيview JOYO JF-06 Vintagاي مرحلو گٽار اثر پيڊل صارف دستياب
JOYO JF-06 Vin لاءِ جامع استعمال ڪندڙ دستيابtagاي فيز گٽار اثر پيڊل، ڍڪڻ وارننگن، بيٽري جي متبادل، استعمال جون هدايتون، ٽيڪنيڪل وضاحتون، وارنٽي جي معلومات، ۽ ٺاهيندڙ جي تفصيل.
اڳيview JOYO UZI R-03 ڊسٽورشن گٽار اثر پيڊل - استعمال ڪندڙ مينوئل ۽ وضاحتون
JOYO UZI R-03 ڊسٽورشن گٽار اثر پيڊل بابت تفصيلي معلومات، جنهن ۾ وضاحتون، خاصيتون، ڪنٽرول، ۽ وارنٽي جي معلومات شامل آهن. پنهنجي UZI R-03 کي استعمال ڪرڻ ۽ برقرار رکڻ جو طريقو سکو.
اڳيview جويو گرين ليجنڊ اوور ڊرائيو گٽار اثر پيڊل - وضاحتون ۽ خاصيتون
JOYO گرين ليجنڊ (JF-319) آئرن مين سيريز اوور ڊرائيو گٽار اثر پيڊل بابت تفصيلي معلومات، جنهن ۾ وضاحتون، ڪنٽرول، ۽ ٺاهيندڙ جي تفصيل شامل آهن.
اڳيview جويو ڊارڪ فليم آر-17 ڊسٽورشن گٽار اثر پيڊل يوزر مينوئل
جامع استعمال ڪندڙ دستياب ۽ پيداوار مٿانview JOYO R-17 DARK FLAME ڊسٽورشن گٽار اثر پيڊل لاءِ، انقلاب سيريز جو حصو. وضاحتون، ڪنٽرول وضاحتون، LED لائٽنگ موڊس، وارنٽي معلومات، ۽ ٺاهيندڙ جي تفصيل شامل آهن.