AUTOOL DM303 آٽو تشخيص ملٽي ميٽر استعمال ڪندڙ دستياب

1. تعارف

The AUTOOL DM303 is a hand-held, advanced diagnostic oscillometric multimeter designed for automotive applications. It integrates the functionalities of a digital oscilloscope and a digital multimeter, utilizing embedded digital control technology to provide comprehensive vehicle circuit testing and analysis. This manual provides detailed instructions for the proper use and maintenance of your DM303 device.

Figure 1: AUTOOL DM303 Auto Diagnostic Multimeter with included accessories.

2. اهم خاصيتون

The AUTOOL DM303 offers a wide range of diagnostic and measurement capabilities:

• ملٽي ميٽر جا ڪم: DC/AC Voltage Measurement, DC/AC Current Measurement, Resistance Measurement, Frequency Measurement, Diode Test.
• Oscilloscope Test: Waveform analysis with 500KHz bandwidth and variable sampزبان جي تعدد.
• Automotive Specific Tests: Automotive Circuit Test, Cranking Test, Injector Test, Relay Test, Analog Signal Test, Ignition Signal Test, K/CAN Line Data analysis.
• ڏيکاريو: 2.8-inch color LCD with 320*240 resolution and adjustable brightness.
• گهڻ لساني حمايت: English, Russian, French, Italian, German, Spanish, Portuguese, Polish, Dutch, Japanese, Korean, Chinese.
• پورٽيبلٽي: Comes with a durable portable toolbox for easy storage and protection.
• Software Upgradable: Supports application software updates via SD card.

شڪل 2: ختمview of the 12 test functions available on the DM303.

3. پيڪيج مواد

The AUTOOL DM303 package includes the following items:

• AUTOOL DM303 Main Unit
• پورٽيبل ٽول باڪس
• استعمال ڪندڙ دستي
• Various Detection Lines and Probes:

شڪل 3: تفصيلي view of the various detection lines and their applications.

4. پراڊڪٽ ختمview

Familiarize yourself with the components and controls of the AUTOOL DM303:

Figure 4: AUTOOL DM303 device layout and labeled parts.

1. ڊسپلي اسڪرين
2. طاقت جو اشارو
3. پاور چاٻي
4. چاٻي رکو
5. هدايت جي چاٻي
6. واپسي چاٻي
7. داخل ڪريو چيڪ
8. 10A موجوده ان پٽ
9. mA/uA ماپ ان پٽ
10. روشني جي چاٻي
11. ZERO / F1 Function key
12. F2 فنڪشن چيڪ
13. ماپ موڊ سوئچنگ
14. ڊيوڊ، جلدtagاي، مزاحمت، تعدد جي ماپ ان پٽ
15. COM ماپ ان پٽ
16. DB15 انٽرفيس
17. SD card slot / data interface
18. روشني
19. پٺيءَ وارو ٽڪرو

5. شروعاتي سيٽ اپ

5.1 بيٽري لڳائڻ

The DM303 is not equipped with batteries upon purchase. You will need to acquire 4x 1.5A batteries or a 3.7V, 1200 mAh lithium battery locally. Ensure correct polarity when installing batteries. The device will automatically turn off if disconnected from the charging cable without batteries installed.

5.2 ٻولي سيٽنگون

هي ڊوائيس ڪيترن ئي ٻولين کي سپورٽ ڪري ٿو. ٻولي تبديل ڪرڻ لاءِ:

1. ڊوائيس تي پاور.
2. Navigate to the 'Basic Setting' menu using the direction keys.
3. Select 'Language Setting' and choose your preferred language from the list (English, Russian, French, Italian, German, Spanish, Portuguese, Polish, Dutch, Japanese, Korean, Chinese).
4. پنھنجي چونڊ جي تصديق ڪريو.

Figure 5: Language selection screen on the DM303.

5.3 اسڪرين جي روشني جي ترتيب

The 2.8-inch color display's brightness can be adjusted for optimal visibility in various working environments.

1. Navigate to the 'Basic Setting' menu.
2. Select 'Brightness' and adjust to your desired level.

Figure 6: Basic settings menu for screen brightness.

6. آپريٽنگ هدايتون

The AUTOOL DM303 offers a variety of diagnostic modes. Select the appropriate mode from the main menu using the direction keys and 'OK' button.

6.1 Multimeter Functions

Access the Multimeter mode to perform standard electrical measurements:

• جلدtage Measurement (DC/AC): Connect the probes to the circuit to measure voltage. The input impedance is 2~3MΩ for voltages below 160V and 10MΩ for voltages مٿي 160V.
• Current Measurement (DC/AC): Use the 10A terminal for currents up to 20A (protected by a 15A self-recovery fuse) or the mA/uA terminal for currents up to 200mA (protected by a 0.5A self-recovery fuse).
• مزاحمت جي ماپ: Measure the resistance of components.
• تعدد جي ماپ: Determine the frequency of electrical signals.
• ڊيوڊ ٽيسٽ: Check the functionality of diodes.

6.2 Oscilloscope Test

The Oscilloscope mode provides a comprehensive intelligent measurement system for signal analysis. It features a waveform test bandwidth of 500KHz and a variable sampling frequency, allowing for the measurement and observation of various automotive signals, including:

• Motor drive signals and motor power voltage in new energy vehicles.
• Fuel car engine ignition pulse signals.
• Camshaft and crankshaft signals.
• Wheel speed sensor signals.
• Oxygen sensor signals.

6.3 Automotive Circuit Test

This function allows for general testing of automotive circuits to identify faults.

6.4 ڪريڪنگ ٽيسٽ

Perform a cranking test to assess battery and starter performance during engine startup. The device displays current, minimum voltage, and start voltage, comparing them against a minimum value of 9.6V.

6.5 انجيڪٽر ٽيسٽ

Test the operation of fuel injectors by simulating engine speed (e.g., 1000 RPM) and checking the output signal.

6.6 رلي ٽيسٽ

Verify the functionality of automotive relays by checking their output status and contact resistance.

6.7 Analog Signal Test

Generate and test analog signals, including sine wave and square wave outputs, with adjustable frequency and duty cycle.

6.8 Ignition Signal Test

Analyze ignition pulse signals to diagnose ignition system issues.

6.9 K/CAN Line Data

Monitor and analyze K/CAN line data for communication diagnostics within the vehicle's network.

شڪل 7: مثالamples of the DM303 interface display for different test functions.

7. وضاحتون

Figure 8: DM303 product dimensions and key specifications.

8. مسئلا حل ڪرڻ

• ڊوائيس تي طاقت نه آهي: Ensure batteries are correctly installed and charged, or that the device is connected to a power source.
• ڪابه ڊسپلي يا مدھم ڊسپلي ناهي: Adjust screen brightness in the 'Basic Setting' menu.
• غلط پڙهڻ: Verify that the probes are correctly connected to the appropriate input terminals and that the correct measurement mode is selected. Check for damaged cables or probes.
• Difficulty with K/CAN line data: Ensure proper connection to the vehicle's K/CAN lines. Refer to the vehicle's service manual for specific wiring diagrams.
• Testing 24V circuits: The DM303 supports DC voltage measurement up to 1000V, so it is suitable for testing 24V circuits.
• Injector testing for high-pressure injectors: The Injector Test function provides signal output for injector operation. While it simulates engine speed (500-6000rpm), specific voltage requirements for high-pressure injectors (e.g., 75V) are not explicitly stated as a direct output capability. Always refer to the vehicle's specifications for compatibility.

9. استعمال ڪندڙ ٽوٽڪا

• بيٽري جي تياري: Remember that the DM303 does not include batteries. Purchase 4x 1.5A batteries or a 3.7V, 1200 mAh lithium battery before first use.
• ٻولي جي ترتيب: صلاح وٺڻtage of the multilingual support to set the device to your native language for easier operation.
• سافٽ ويئر اپڊيٽ: Regularly check the AUTOOL Official Store website for software updates. Updates can be installed via an SD card to ensure your device has the latest features and improvements.
• ڪيبل جو انتظام: Utilize the provided portable toolbox to keep all cables and accessories organized and protected, extending their lifespan.

10. سار سنڀال

• اسٽوريج: Always store the DM303 and its accessories in the provided portable toolbox when not in use. This protects the instrument from physical damage due to falling or crashing.
• ماحولياتي حالتون: Operate the device within the specified working temperature of 0~40°C (32~104°F) and humidity ≤75%. For storage, maintain temperatures between 10~50°C (14~122°F) and humidity ≤70%.
• صفائي: ڊوائيس کي نرم، سڪل ڪپڙي سان صاف ڪريو. رگڙيندڙ صاف ڪندڙ يا محلول استعمال نه ڪريو.
• سافٽ ويئر اپڊيٽ: Keep the device's software updated by downloading the latest versions from the AUTOOL website and installing them via an SD card.

Figure 9: The portable toolbox helps protect your DM303.

11. وارنٽي ۽ سپورٽ

11.1 وارنٽي ڄاڻ

All AUTOOL products purchased from an authorized AUTOOL store come with a 3 سال وارنٽي. This warranty covers manufacturing defects and ensures the quality of your product.

11.2 ٽيڪنيڪل سپورٽ

AUTOOL Official Store provides lifetime technical support for the DM303. If you encounter any issues or have questions regarding the operation of your device, please contact our customer service. All emails will be answered within 24 hours.