1. تعارف
The VALKYRIE V360 is a high-performance all-in-one (AIO) CPU liquid cooler designed to provide superior thermal management for your processor. It features a vibrant 3.5-inch IPS LCD screen for real-time system monitoring and customization, advanced LCP blade fans for efficient airflow, and a unique replaceable magnetic water-cooling head for personalized aesthetics and easy maintenance. This manual provides essential information for the installation, operation, and maintenance of your VALKYRIE V360 liquid cooler.
2. پيڪيج مواد
مھرباني ڪري تصديق ڪريو ته سڀئي جزا توھان جي پيڪيج ۾ موجود آھن:
- 1x VALKYRIE V360 Radiator with Integrated Pump/Water Block
- 3x LCP Blade Fans
- 1x CPU Backplate
- 2x Intel Mounting Brackets
- 2x AMD Mounting Brackets
- 12x Fan Screws
- 12x ريڊيٽر اسڪرو
- 12x Long Standoffs
- 1x Short Standoff
- 1x USB ڪيبل
- 3x RGB Cables
- 1x Thermal Paste Syringe (GT-20B high-performance thermal conductive silicone grease)
- 4x Water Block Caps (various designs)
- 1x Controller (for RGB and LCD, implied)
- 1x استعمال ڪندڙ دستياب
- 1x Decorative Figurine (optional, may vary by package)
3. سيٽ اپ ۽ تنصيب
Before installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket information.
3.1. مطابقت
The VALKYRIE V360 supports the following CPU sockets:
- Intel: LGA 115x, LGA 1200, LGA 1700, LGA 2011, LGA 2066
- AMD: ايم 4، ايم 5
3.2. عام انسٽاليشن جا مرحلا
- سي پي يو تيار ڪريو: Clean the CPU surface thoroughly. Apply the included thermal paste (GT-20B) to the center of the CPU in a pea-sized dot or thin line.
- بيڪ پليٽ انسٽال ڪريو: For Intel sockets, attach the appropriate backplate to the rear of the motherboard. For AMD, use the existing stock backplate if applicable.
- اسٽينڊ آف ڳنڍيو: Screw the correct standoffs into the backplate or motherboard mounting holes.
- ماؤنٽ ريڊيٽر ۽ پنکھا: Secure the three LCP blade fans to the radiator using the fan screws. Mount the radiator to an available fan mount in your PC case (e.g., top, front, or side) using the radiator screws.
- پاڻي بلاڪ لڳايو: Carefully place the water block onto the CPU, aligning the mounting holes with the standoffs. Secure it with the provided thumb screws or nuts, tightening in a cross pattern until snug.
- ڪيبل ڳنڍڻ:
- Connect the pump's 4-pin PWM cable to the CPU_FAN or AIO_PUMP header on your motherboard.
- Connect each fan's 4-pin PWM cable to available fan headers on your motherboard or a fan hub.
- Connect the S-RGB GEN2 lighting cables from the fans and water block to an ARGB header on your motherboard or the included controller.
- Connect the USB cable from the water block to an internal USB 2.0 header on your motherboard for LCD screen functionality and software control.
- ڪيبل جو انتظام: سڀني ڪيبلن کي صاف طور تي روٽ ڪريو ته جيئن مناسب هوا جي وهڪري ۽ صاف تعمير کي يقيني بڻائي سگهجي.
4. آپريشن
4.1. IPS LCD Screen
The 2.1-inch 480x480 resolution IPS LCD screen on the water block displays real-time system information such as CPU temperature, load, and other customizable metrics. It provides a high-definition display effect and can be personalized through the MYTH.COOL application software.
4.2. S-RGB GEN2 Lighting
The VALKYRIE V360 features comprehensively upgraded S-RGB GEN2 addressable lamp beads on the fans and decorative strips. These can be controlled and customized via software programming to create diverse and personalized lighting effects.
4.3. MYTH.COOL Control Center
The MYTH.COOL application software allows you to monitor system performance, customize the LCD display, and control the S-RGB lighting effects. It leverages GPU resources to create more display games and personalized DIY cold-head display effects.
5. سار سنڀال
باقاعده سار سنڀال توهان جي مائع ڪولر جي بهترين ڪارڪردگي ۽ ڊگهي عمر کي يقيني بڻائڻ ۾ مدد ڪري ٿي.
- مٽي صاف ڪرڻ: وقتي طور تي ريڊيئيٽر جي پنن ۽ پنن جي بليڊن مان مٽي کي دٻيل هوا يا نرم برش استعمال ڪندي صاف ڪريو. پڪ ڪريو ته صفائي دوران پنکھا نه گھمي رهيا آهن.
- ٽيوبنگ جي چڪاس: Check the rubber water guide pipes for any signs of kinks, leaks, or damage.
- Water Block Head: The water-cooling head features a replaceable magnetic upper cover, allowing for easy customization and access if needed.
6. مسئلا حل ڪرڻ
If you encounter issues with your VALKYRIE V360, consider the following common solutions:
- بجلي/ بتيون ناهن: Ensure all power cables (pump, fans, RGB) are securely connected to the motherboard or controller. Check motherboard headers for proper function.
- اعلي درجه حرارت: Verify the water block is securely mounted to the CPU and thermal paste is properly applied. Ensure fans are spinning and the radiator is free of dust. Check pump operation (listen for a faint hum or feel for vibrations).
- LCD Not Displaying: Confirm the internal USB 2.0 cable is correctly connected to both the water block and the motherboard. Ensure the MYTH.COOL software is installed and running.
- RGB Not Working: Check RGB cable connections. Ensure the RGB header on your motherboard or controller is enabled and configured correctly via software.
- غير معمولي شور: Check for loose fan screws or cables interfering with fan blades. Ensure the pump is not running dry (though this is an AIO, extreme angles during operation can sometimes cause air bubbles).
7. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | V360 |
| قسم | CPU All-In-One Liquid Cooler |
| سپورٽ ٿيل سي پي يو ساکٽ | Intel: LGA 115x/1200/1700/2011/2066, AMD: AM4/AM5 |
| هيٽ سنڪ مواد | Base: Pure Copper, Radiator: Aluminum |
| ريڊيٽر جو قسم | 360mm (397*120*27mm) |
| Water Guide Pipe | Rubber Pipe (EPDM polymer) |
| Water Block Head Size | 86*74.6*69mm |
| Supported Power Consumption | 300W تائين |
| ڊسپلي اسڪرين | 2.1-inch 480*480 IPS LCD |
| پمپ Voltage | 12V |
| Pump Power Interface | 4PIN (PWM) |
| پمپ جي رفتار | 800-2800 rpm ±10% |
| مداحن جو تعداد | 3 |
| پنکڙي جو مواد | LCP+PBT |
| فين انٽرفيس | 4PIN (PWM) |
| فين جي رفتار | 800-2150 rpm ±10% |
| Air Volume (MAX) | 81.68 سي ايف ايم |
| Wind Pressure (MAX) | 4.0 mmH2O |
| Fan Noise (MAX) | 29.5 ڊي بي اي |
| RGB سپورٽ | A-RGB (S-RGB GEN2, adjustable) |
| پيڪيج جو وزن | لڳ ڀڳ 5.0 ڪلو |
8. وارنٽي ۽ سپورٽ
The VALKYRIE V360 liquid cooler comes with a پنجن سالن جي وارنٽي. For technical support, warranty claims, or further assistance, please contact your retailer or the official VALKYRIE support channels.
9. استعمال ڪندڙ ٽوٽڪا
- صداقت: Ensure you purchase your VALKYRIE V360 from an authorized reseller to guarantee product authenticity and warranty coverage.
- سنڀالڻ: The package weighs approximately 5.0 kg. Handle with care during unboxing and installation.
- سافٽ ويئر حسب ضرورت: Explore the MYTH.COOL Control Center software to fully customize your LCD display and RGB lighting effects for a unique PC aesthetic.
- بهترين ڪارڪردگي: For best cooling performance, ensure your PC case has adequate airflow and that the radiator is mounted in a position that allows for efficient heat dissipation.
