WAYXIN R6S Motorcycle Helmet Intercom User Manual

1. تعارف

The WAYXIN R6S is a high-performance motorcycle helmet intercom system designed for clear and reliable communication among riders. Featuring Bluetooth 5.0, DSP & CVC noise reduction, and IP67 waterproofing, it allows for group communication, music playback, GPS navigation, and voice assistant activation.

Image: WAYXIN R6S Intercom units highlighting 1200M intercom, compatible pairing, DSP&CVC noise reduction, 800mAh battery, and 6-rider intercom capability.

2. پيڪيج مواد

Please check the package contents upon unboxing to ensure all components are present. The R6S is available in single and double pack configurations.

Image: Contents of Single Pack and Double Pack, including R6S units, fixed brackets, metal sheets, 3.5 interface speakers, microphones (hardcore and button), Type-C charging cables, installation tool, and manual.

Single Pack Includes:

• 1x R6S Host Unit
• 1x Fixed Bracket
• 1x Metal Sheet
• 1x 3.5 Interface Speaker
• 1x Hardcore Microphone
• 1x Button Microphone
• 1x ٽائپ-سي چارجنگ ڪيبل
• 1x انسٽاليشن ٽول
• 1x استعمال ڪندڙ دستياب

Double Pack Includes:

• 2x R6S Host Units
• 2x Fixed Brackets
• 2x Metal Sheets
• 2x 3.5 Interface Speakers
• 2x Hardcore Microphones
• 2x Button Microphones
• 2x Type-C Charging Cables
• 1x انسٽاليشن ٽول
• 1x استعمال ڪندڙ دستياب

3. سيٽ اپ ۽ تنصيب

Follow these steps to properly install your WAYXIN R6S intercom system on your helmet.

3.1 انٽرڪام يونٽ لڳائڻ

Image: Visual guide for installing the R6S unit onto a helmet using the fixed bracket and metal sheets.

1. Clean the desired mounting area on the side of your helmet.
2. Peel off the adhesive backing from the fixed bracket.
3. Attach the fixed bracket firmly to the helmet.
4. Secure the bracket further using the provided screws and installation tool, if desired, for a more permanent attachment.
5. Slide the R6S intercom unit onto the fixed bracket until it clicks into place.
6. Ensure the unit is securely attached and does not wobble.

3.2 اسپيڪر ۽ مائڪروفون جي انسٽاليشن

The R6S comes with high-quality speakers and two types of microphones (hardcore and button) to suit different helmet types and preferences.

Image: Diagram showing speaker parameters (40mm diameter, 7mm thickness, 32ohm impedance, 35mW power) and microphone types, along with applicable helmet types (Full face, Half face, Summer, Off-road).

1. Attach the speakers inside your helmet, aligning them with your ears for optimal sound. Use the adhesive pads provided.
2. پنهنجي هيلمٽ جي قسم لاءِ مناسب مائڪروفون چونڊيو:
   • Hardcore Microphone: Suitable for open-face or modular helmets where the microphone needs to extend closer to your mouth.
   • بٽڻ مائڪروفون: Ideal for full-face helmets where the microphone can be discreetly placed inside the chin bar.
3. Connect the chosen microphone and speakers to the 3.5mm interface on the R6S unit.
4. Tuck all wires neatly under the helmet padding to prevent interference and ensure comfort.

4. آپريٽنگ هدايتون

4.1 پاور آن/آف

• پاور آن: Press and hold the main power button (center button with power icon) for approximately 3 seconds until you hear a power-on tone and the indicator light illuminates.
• بجلي بند: Press and hold the main power button for approximately 3 seconds until you hear a power-off tone and the indicator light turns off.

4.2 Bluetooth Pairing with Phone/GPS/MP3

1. Ensure the R6S unit is powered off.
2. Press and hold the main power button for approximately 7 seconds until the red and blue indicator lights flash alternately. This indicates pairing mode.
3. On your phone, GPS, or MP3 device, enable Bluetooth and search for available devices.
4. Select "WAYXIN R6S" from the list of found devices.
5. Once connected, the indicator light on the R6S will flash blue slowly.

4.3 Intercom Pairing Operation (for multiple R6S units)

The R6S supports pairing up to 6 riders, with 2 riders able to talk simultaneously. The leader can initiate conversations with any paired rider.

Image: Step-by-step visual guide for pairing two R6S intercom units for communication.

1. Enter Pairing State: With both R6S units powered off, press and hold the power button on each unit for 7 seconds until the red and blue lights flash alternately.
2. سرچ موڊ داخل ڪريو: On one of the units, press the intercom button (often labeled 'B' or 'C' on the device) to enter search state. The blue light will flash quickly.
3. خودڪار جوڙڻ: The two products will automatically attempt to pair. Once pairing is complete, both units will show blue lights flashing simultaneously.
4. انٽرڪام شروع ڪريو: After successful pairing, short press the intercom button on one of the products to enter intercom mode. The light will flash purple.

Notice: In step 3, you only need to press the intercom button on one of the products, not both. If the product has a connection record, you only need to press the intercom button to enter the intercom state, without repeating the full pairing process.

4.4 Activating Voice Assistant (Siri/Google Assistant)

You can activate your phone's voice assistant directly from the R6S unit.

Image: Diagram illustrating how to activate the phone's voice assistant (Siri/Google Assistant) by double-tapping the phone button on the R6S unit, with examples of commands like "Open Google Maps" or "Call Peter".

• چالو ڪرڻ: Double-tap the phone button (often labeled 'D' on the device) to wake up your phone's voice assistant (e.g., Siri or Google Assistant).
• You can then issue commands such as "Open Google Maps", "Call Peter", "Open Music", "Music last song", or "Music next".

4.5 حجم ڪنٽرول

• حجم و :ايو: '+' بٽڻ دٻايو.
• حجم گھٽايو: '-' بٽڻ دٻايو.

5. سار سنڀال

5.1 چارج ڪرڻ

The R6S unit features an 800mAh lithium battery and charges via a Type-C interface.

Image: Diagram showing the 800mAh battery capacity, with 15 hours working time, 2.5 hours charging time, and 300 hours standby time.

• Connect the provided Type-C charging cable to the R6S unit and a suitable USB power adapter.
• مڪمل چارج لڳ ڀڳ 2.5 ڪلاڪ لڳن ٿا.
• انڊيڪيٽر لائيٽ عام طور تي چارجنگ دوران ڳاڙهي ڏيکاريندي ۽ مڪمل چارج ٿيڻ تي نيرو يا بند ٿي ويندي.

5.2 پاڻي صاف ڪرڻ

The R6S is designed with IP67 waterproofing, making it resistant to rain and splashes.

Image: The R6S unit submerged in water, illustrating its IP67 waterproof capability.

• While it is waterproof, avoid prolonged submersion or high-pressure water jets.
• پڪ ڪريو ته چارجنگ پورٽ ڪَوَر محفوظ طور تي بند ٿيل آهي جڏهن چارج نه ٿي رهيو هجي ته جيئن پاڻي جي مزاحمت برقرار رهي.

5.3 صفائي

• يونٽ کي نرم سان مسح ڪريو، ڊيamp ڪپڙو.
• استعمال نه ڪريو سخت ڪيميائي يا rasرندڙ صاف ڪندڙ.

6. مسئلا حل ڪرڻ

6.1 عام مسئلا ۽ حل

• يونٽ پاور آن نٿو ٿئي:
  • Ensure the battery is charged. Connect to a charger and try again after a few minutes.
  • نقصان لاءِ چارجنگ ڪيبل ۽ اڊاپٽر چيڪ ڪريو.
• فون/جي پي ايس سان جوڙو نه ٿو ٺاهي سگهجي:
  • Ensure the R6S is in pairing mode (red and blue lights flashing alternately).
  • پڪ ڪريو ته توهان جي ڊوائيس تي بلوٽوٿ فعال آهي ۽ اهو ڳولهي سگهجي ٿو.
  • Try restarting both the R6S and your device.
  • جيڪڏهن توهان وٽ تمام گهڻا بلوٽوٿ ڪنيڪشن آهن ته پنهنجي ڊوائيس تي پوئين بلوٽوٿ ڪنيڪشن صاف ڪريو.
• Intercom not connecting or one unit not working:
  • Ensure both units are fully charged.
  • Repeat the intercom pairing process carefully (Section 4.3).
  • If units were previously paired, try resetting them and re-pairing.
  • Ensure you are within the maximum intercom distance (1200m).
• Poor sound quality or excessive noise:
  • Ensure speakers are positioned correctly over your ears.
  • Check microphone placement to ensure it's close to your mouth and not obstructed.
  • The DSP & CVC noise reduction technology is active, but extreme wind or engine noise might still affect clarity at very high speeds.
• Voice assistant not responding:
  • Ensure your phone is connected via Bluetooth.
  • Double-tap the phone button firmly.
  • Check your phone's settings to ensure the voice assistant is enabled and accessible via Bluetooth devices.

7. وضاحتون

8. وارنٽي ۽ سپورٽ

WAYXIN is a brand established in 2016, specializing in helmet Bluetooth headsets, committed to providing quality products and service.

Image: Warranty details and authoritative certifications for WAYXIN products.

8.1 پروڊڪٽ وارنٽي

After receiving the product, we provide a one-year product warranty for the main unit and a six-month warranty for the headset part (speakers and microphones).

هيٺيون حالتون وارنٽي سان ڍڪيل نه آهن:

• The product is damaged due to dismantling of the product by a third-party organization or individual.
• The product is damaged due to human reasons (misuse, accidental damage).
• The product is damaged due to force majeure factors (natural disasters, etc.).

8.2 ڪسٽمر سپورٽ

For any questions or issues not covered in this manual, please contact your retailer or WAYXIN customer support for assistance.

9. استعمال ڪندڙ ٽوٽڪا

• بٽڻ افعال: The buttons labeled B, C, D, E on the unit typically correspond to specific functions like intercom activation, phone calls, and volume control. Familiarize yourself with their layout for easy operation while riding.
• عالمگير جوڙو: Don't hesitate to try pairing your R6S with other brands of Bluetooth intercom units. The universal pairing function is designed for broad compatibility.
• شور جي گھٽتائي: For optimal noise reduction, ensure your microphone is positioned correctly and your helmet is properly sealed to minimize wind noise.
• بيٽري جي زندگي: To maximize battery life, fully charge the unit before long rides and avoid leaving it completely discharged for extended periods.